Siemens PA3515

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • senchire
    Senior Member
    • Dec 2012
    • 190
    • Bosnia
    #1

    Siemens PA3515

    Hello guys, I went to reball this one (yes it has been reworked by someone who was not careful with removing of the black epoxy).
    So here is the picture is this a dummy pad or not?
    Attached Files
    Tags: None
    • dj_ricoh
      Badcaps Legend
      • Jan 2013
      • 2073
      • uk
      #2
      Re: Siemens PA3515

      its that solder? or the pad its fubar?
      Just cook it! It's already broken.

        Comment

        • ktmmotocross
          Boardkiller
          • Feb 2014
          • 3627
          • slovakia
          #3
          Re: Siemens PA3515

          i think that pin was repaired. not many guys doing that

            Comment

            • senchire
              Senior Member
              • Dec 2012
              • 190
              • Bosnia
              #4
              Re: Siemens PA3515

              The pad is destroyed not fixed. Since he destroyed the mask whole dummy pad (yea its dummy) is lifted and it looks like its fixed .
              Today everyone tries to do reworks ^^.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • javieromex
                  Black Epoxy on bios chip
                  by javieromex
                  Hi friends, I have a Lenovo E14 Gen 2 Type 20TA laptop with serial number MJ-0GWZSZ TYPE 20TA-002CUS. Intel Core ™ i5-1135G7. It has Winbond 25R256JVEQ BIOS which has black epoxy resin. I have 2 questions. What method do you use to remove the epoxy? and the second, what chip do you use to program it if you have the TL866 II Plus programmer? Thanks in advance.

                  ...
                  11-28-2024, 06:20 PM
                • alpersen
                  Siemens Washing Machine WM12T581TR/67 Touch Panel not working correctly
                  by alpersen
                  On the right bottom side it has a start/stop button (normally it is illuminated, when I took the picture it was blinking I took at the wrong time ). and the touch area there is not working, maybe if I am able to touch the most right bottom in a maybe 1 square millimeter area it works. also generally if I touch the normal place where the start stop icon is, the weight + and - areas register so there is a touch calibration problem in that area. All icons maybe 60% of the left side register correctly in their respective size. Siemens service recommends replacing the control pcb and screen (nearly...
                  10-24-2025, 01:55 AM
                • Thermaltake
                  Fujitsu Siemens Amilo Xa 3530
                  by Thermaltake
                  Hi, I got this Fujitsu Siemens Amilo Xa 3530 Model: MS2244. from a friend and it is powering On, but only functional keys lights up, fan spins and nothing else, screen is black no backlight, and it's staying like that forever. I tried other memory that I know is working, I tried to empty capacitors by holding power button without battery but still nothing. I didn't try new cmos battery, need to disassemble it first to try that. But I don't think even if cmos battery is dead it would give some backlight and picture...I kind of think it's chipset or gpu dead.
                  I read something on google that...
                  02-01-2024, 12:34 PM
                • mengpo
                  Siemens RVS21.831, Looking for References, Models, and Values of These Components
                  by mengpo
                  Hi everyone,

                  Following a short circuit on the controller board of my heat pump, I'm looking to replace the components shown in the photos. All I know is that they are diodes (but I'm not sure what type), and I haven't been able to find their equivalents.
                  The one on the left says: 15A 5BA
                  The one on the right says: DTZ S47 or DTZ 547
                  Does anyone know how to identify them?

                  Thank you very much for your help!

                  FYI, the card is a siemens RVS21.831
                  2 Photos
                  02-15-2025, 10:50 AM
                • johancraftech
                  Help needed with Siemens S11868502 D SIM24 ECU component value/s
                  by johancraftech
                  Foremost, I am not an ecu specialist. This ECU: Siemens S11868502 D SIM24 (Ford KA 1.3 Petrol) ended on my bench. It was previously worked on by an unknown technician. The only information I have at hand, is that the owner replaced the ignition coil as the latter caused one of the IGBT's in the ECU to short. The IGBT I can source and replace, but it seems that the previous technician removed 2 components (most probably resistors in a mini-melf package): see attached photo. It seems that schematics and/or board view files does not exist. If there are any ECU specialists that can assist in identifying...
                  02-05-2025, 06:28 AM
                • Loading...
                • No more items.
                Working...