Hi, I have problem with the screen backlight, tryed to change screen cable and inverters and still no backlight. Please help!!!
-
-
Re: HP CQ70 no Backlight
CCFL tube in the screen is gone. Replace the panel. -
Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: HP CQ70 no Backlight
Please i need the bios of CQ70
07263-1
Vitas MB
48.4I501.011Last edited by Pascal Komlassan; 02-11-2017, 03:21 AM.Comment
-
Re: HP CQ70 no Backlight
Hi ,
i've the same problem with an laptop CQ70 .
I tried to change LCD panel, Inverter, LVDS cable and the same problem no backlight.
I tested if i have 3VS but no 3VS on LVDS and when i check the motherboard i seen the D21 and D22 are missing. On pad ( printed trace) of D21 and D22 on the motherboard i found 3VS but not on C364 and not on C374.
I tried to jump on motherboard the lines of D21 and D22 each separately without any result.Comment
-
Hello,
YouTube video of the problem encountered: https://youtube.com/shorts/q7TLNv36LUo
I am a pro and I have a problem that I have never seen despite my 7.5 years of experience on my own and my thousands of repairs, on a customer's Dell G3 15 3500.
On this PC I have already changed the complete palmrest because the keyboard was no longer working properly.
I also changed the screen because the PC fell and the screen was broken.
I changed the battery with a new and original battery.
I also had corrosion/oxidation on the... -
Hello, I'm working on a new deskmod pc project and have a problem with my monitor, an AOC U34G3XM, well, I may have bricked it.
The monitor was dismanteled and the separate parts parts integrated in the desk. the screen panel alone is on the upper part, and main board/video board + power board on the back of the desk (not enough place on the cover to fit it)
At first everything was working smoothly, then I decided to change the connexion between the video board and the screen for a longer one. Still working fine
During another reassembly, I made a mistake, and... -
Hi everyone, hope all is well. I have run into a problem where my backlight screen is no longer working.
The original screen was beginning to show signs of faultiness. I believe it was part of the inverter board that was going bad. The backlight for the screen was still functional at this point. Well one night as I was tinkering with the laptop, my idiot self forgot to disconnect the battery from the motherboard. I attempted to reconnect the EDP cable onto the motherboard, and as you might guess, I saw a nice spark from the cable and the port. Don't worry, I'm still kicking myself... -
I am just wondering if anyone has boardview+schematics for HP Probook 450 G8.
Computer is missing screen backlight. The backlight fuse must be kaput. I know the fuse is located on the motherboard because we tried a different working screen and it, too is missing backlight.
Perhaps, if the boardview+schematics are not available, someone can point out where the screen backlight fuse is located. Thanks. -
Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!
My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.
This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
Comment