Which one is good BGA machine..
which one is good BGA machine in lowest price ?
-
-
Re: Which one is good BGA machine..
any one know? where is forum admin? -
Re: Which one is good BGA machine..
As Admin didn't reply to you in 34 minutes how about trying Google
System: HP xw6600 Workstation, 650W PSU | 2x Intel Xeon Quad E5440 @2.83GHz | 8x 1GB FB-DDR2 @ 667MHz | Kingston/Intel X25-M 160GB SSD | 2x 1TB Spinpoint F3, RAID0 | 1x 1TB Spinpoint F3, backup | ATI FireGL V7700 512MB | Sony Optiarc DVD +/-RW | Win 7 Ultimate x64 | 2x Dell UltraSharp U2410f | Dell E248WFPComment
-
Re: Which one is good BGA machine..
BGA machine...?
Hot air station? Infrared heater? Reballing kit?
Be specific.Comment
-
Re: Which one is good BGA machine..
For infrared, low-cost will not get you anything good.
I have the cheapest one (T-862++) from Puhuit and it sucks. You have to burn many chips before you get it right. The infrared beam pulsates which creates a dramatic drop in temperature everytime.
In my experience, it's better to get a non-pulsating machine. But you're looking at $1000+Comment
-
Re: Which one is good BGA machine..
ACHI IR Pro SC. It's dark IR and the newer versions aren't plagued by uneven heat. Like the previous poster noted, this will put you back about $1300. The other option is maybe the T870A (the unit I previously used) but its hit or miss. You have to play around with it a lot to get the feel of how to use it.Comment
-
Re: Which one is good BGA machine..
My friend suggests this machine http://www.bga-rework.in/products/bga-rework-station/
if any one have previous experience this machine ?Comment
-
Re: Which one is good BGA machine..
Ah, Jovy Systems...
Yes, good choice. German-quality. Can't argue with that.
But really, no IR machine (no matter how good) will be fully set to accomodate your needs.Comment
-
This specification for the ALIENWARE Steam Machine R2 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Steam Machine R2 boardview and Steam Machine R2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...09-12-2024, 03:28 PM
-
Hi All,
Just wanted to ask is it possible to remove admin user accounts on Mojave when you do not have the admin password for the account you want to remove? We have our own account setup as an admin but the customers setup their own also as an admin.
We have a loaner A1708 we leant to a customer while we were repairing her A2442. Customer decided she would setup her own account despite me setting up an account for her. We obviously do not have her password and unfortunately, she cannot remember what password she used so now we have a second admin account we would... -
OK, this is a long shot. I got this sewing machine cheap because it's end of line, ex-display, and had no pedal. The genuine pedal costs £60, while Ebay knock-offs go for around £15. So I went for the knock-off, it doesn't work, and I'm not sure whether it's the pedal or the sewing machine that has the problem.
Now this is an electronic machine, unlike the old fashioned sort where the pedal was a big resistor in series with the power to the motor. Here, the pedal is just (I think) a variable resistor fed with a 5 volt supply, and limited to a current of 5 milliamps. Assuming that... -
PS4 1215A HDMI DIODE READINGS GOOD EVERYTHING GOOD BUT NO PIC? everything is good! what else can it be? if hdmi diode values are good that means encoder and filters are good right? idk what else it can be guys...01-05-2023, 12:32 AM -
I bought a second hand Mid 2014 A1398 MacBook Pro when I lived in Australia. I'd bought it as a back-up machine because I had a Mid 2014 MacBook Pro, and realising it might one day fail, I wanted a backup machine because I don't like change.
Two weeks after buying MBP2, the seller called me to check if everything was OK with the unit, which I thought was odd. At that stage I might have turned it on a couple of times, but I'd not used it when he'd called. Over the last few years I used the machine seldomly because my original mac has been pretty OK. Every 3-6 months I'd charge it...12-27-2024, 05:19 PM
Comment