Hi guys, I have an A1466 (820-00165-A) board which came in dead, had corrosion on R7181 near ISL6259 chip. I removed corrosion and replace R7181 and the macbook powered on.
After sometime I didn't get any light on the charger but fan was spinning and I was getting battery charge logo on the screen, so I replaced the ISL6259 chip and it came on! everything was working fine.
(NOTE: Customer had previously got the battery replaced from another shop and it was third party bad quality)
I had used my test SSD and my known good original battery.
When I plugged in my customers SSD and battery, The macbook came on 3-4 times, but after that it went to login screen, I typed password and the display became glitchy.
Now, I dont get any post on the macbook but fan is spinning. It spins once, stops for a few secs and starts again. I have noted when it starts spinning for the first time All voltages are present, but when it stops and starts again there are no voltages present.
Please help
After sometime I didn't get any light on the charger but fan was spinning and I was getting battery charge logo on the screen, so I replaced the ISL6259 chip and it came on! everything was working fine.
(NOTE: Customer had previously got the battery replaced from another shop and it was third party bad quality)
I had used my test SSD and my known good original battery.
When I plugged in my customers SSD and battery, The macbook came on 3-4 times, but after that it went to login screen, I typed password and the display became glitchy.
Now, I dont get any post on the macbook but fan is spinning. It spins once, stops for a few secs and starts again. I have noted when it starts spinning for the first time All voltages are present, but when it stops and starts again there are no voltages present.
Please help
Comment