Bios needed HP 290 G2

[hlokhand]

Re: Bios needed HP 290 G2

Newark Rev.A
17520-1
348.0AC92.001

here is old dump attached
plz send tested bios

thanks in advance

[peste]

Re: Bios needed HP 290 G2

Newark Rev.A
17520-1
348.0AC92.001

here is old dump attached
plz send tested bios

thanks in advance

sure this is the original bios ?? .. what you posted is a bios for an HP Pavilion x360 laptop motherboard ... try this bios from the HP website update ..

[hlokhand]

Re: Bios needed HP 290 G2

no this is not hp x360

its a slimline machine hp slim 290


mobo part no

17520-1 REV:A
348.0AC03.0011

[manishldb]

Re: Bios needed HP 290 G2

hp 17520-1
hp 290-a0020in bios bin plz

[peste]

Re: Bios needed HP 290 G2

hp 17520-1
hp 290-a0020in bios bin plz

make a copy of the original bios and try post # 22, if it doesn't work post the original bios here ..

[Rajputrulers]

Re: Bios needed HP 290 G2

Hi. Simpler board came
HP slimline
Newark Rev.A
17520-1
348.0AC92.001
Board starts turns Off..
No display.PL40701 no power.Rest all coils have power .
It has IT8991E 128 DXS is it programmable?
Flashed bios from other site, no changes. I will try this bios from this post too.

please check all I O chip signals and also upload bios on badcaps please

[max_sneka2]

Hp 290 g2 microtower pc bios dump

Hello

i need bios dump for hp 290 g2 microtower

board number lincs mb
17514-1 rev .a
348.0a817.0011

[hardware1]

Re: Hp 290 g2 microtower pc bios dump

Hello

i need bios dump for hp 290 g2 microtower

board number lincs mb
17514-1 rev .a
348.0a817.0011

Here's your New BIOS, it's a Virgin BIOS from HP with your DMI.

Serial Number: 8CG9212MPX.

[sanju@87]

Re: Bios needed HP 290 G2

I am facing the same issue for board. What about yours ?

[roxboy1984]

Re: Bios needed HP 290 G2

Hi Guys, Im facing a similar issue and would appreciate any advice or help. I tried the clean bios listed earlier and the machine booted but now its not turning on again. It seems to turn on intermittently.

I have removed the Cmos battery and when I insert the power cable the fans spin and then stop and then spin again and stop and eventually just stop. If i remove and reconnect the power cable the fans will spin again but even less times until eventually reinserting the power cable shows no sign of life at all.

Does anyone have any ideas on what else could be the issue.? My original bios is attached.

Board is Lincs 17514-1 Rev.A
348.OA816.OO11

[variteja]

Re: Bios needed HP 290 G2

Try This, Its Working for me.

Here's your New BIOS
17514-1 rev.A
Lincs MB
348.OA817.OO11

[sca-m]

LED 3-2
Dont have original bios
MOBO 17514-1 REV A
348.0A817.0011

[SMDFlea]

LED 3-2
Dont have original bios
MOBO 17514-1 REV A
348.0A817.0011

Thread merged. Post the PC serial number, read the rules https://www.badcaps.net/forum/troubl...before-posting

[sca-m]

LED 3-2
Dont have original bios
MOBO 17514-1 REV A
348.0A817.0011

sn : 8CG9210WLQ

[csberti03]

Hi!
I tried to update the bios on this computer and it failed and corrupted the bios.
I tried the hp recovery didnt work.
I downloaded the bios bin for HP flashed it and it boots but i have no serial number etc.
It was in MPM but serial number was readonly could not set it.
DMI tool didn't work too.
The serial number in UEFI tool is in a padding area but it is in different size than the new one.

I have old bios backup and it has serialnumber i found it in hex editor.
Could someone please transer the old data to the new bios.

Serial Number: 8CG9227XK9
Prduct Number: 4NU25EA#AKC
Product family: HP 280
Product Name: HP 290 G2 MT Business PC
CT Number: PGSXT0IK9CCKWK
BID: 19WW1FRD301#SAKC#DAKC
Feature Byte: 2E3Q 3Y6E 6a6y 7J7M 7T7W 7d7j h8.q 8

[peste]

post moved..

[hoaca388]

Hi!
I tried to update the bios on this computer and it failed and corrupted the bios.
I tried the hp recovery didnt work.
I downloaded the bios bin for HP flashed it and it boots but i have no serial number etc.
It was in MPM but serial number was readonly could not set it.
DMI tool didn't work too.
The serial number in UEFI tool is in a padding area but it is in different size than the new one.

I have old bios backup and it has serialnumber i found it in hex editor.
Could someone please transer the old data to the new bios.

Serial Number: 8CG9227XK9
Prduct Number: 4NU25EA#AKC
Product family: HP 280
Product Name: HP 290 G2 MT Business PC
CT Number: PGSXT0IK9CCKWK
BID: 19WW1FRD301#SAKC#DAKC
Feature Byte: 2E3Q 3Y6E 6a6y 7J7M 7T7W 7d7j h8.q 8

Try

[csberti03]

Try

Tried it!

Boots but still no serialnumber

[csberti03]

Found the solution.
Just flash Bios from clean HP.
when you boot into bios go to security tab.
Press CTRL+A and open System IDS
You can type in your in here if you cant find them go to https://partsurfer.hp.com/ and type in your serialnumber
Feature byte is case sensitive and you should not type in the spaces.
I did it 8 chareters per line and it worked.

[sencha]

Hi csberti03,
I used the clean bios and entered feature bytes manually, but can't succeed with windows activation.
Not sure how relevant is following, but /sys/firmware/acpi/tables/MSDM is not there in Linux.

[jobinjo]

HP Pro Tower 290 G9 Desktop PC Bundle (8T2H6ES)

i want bios for this model
the pc display not coming,
bios ic xmc ,

[SMDFlea]

Read the rules, post the serial number etc,etc https://www.badcaps.net/forum/troubl...before-posting