It is a model 3049c zoom v.92/v.90 trying to figure how to get to configuration settings.
-
-
Re: How to check configuration on a modem
AT commands from a serial terminal. -
Re: How to check configuration on a modem
Do you have a link on how to do thisComment
-
Re: How to check configuration on a modem
Stj my computer seems not able to detect the modemComment
-
Re: How to check configuration on a modem
you need the right cable,
a serial terminal,
and the documentation for a start
http://www.zoomtel.com/techsupport/d...conexant.shtml
that's the drivers / docs
specially at the bottom - AT Command Reference Manual
here is a terminalComment
-
Re: How to check configuration on a modem
Ok will install and try it will i be able to get into the bios of the modem once everything is installed.thanks stjComment
-
Re: How to check configuration on a modem
For some reason it can not see the detect the device on com port 3Comment
-
Re: How to check configuration on a modem
I do not have serial port on any of my computers i am using a serial port adapter to usbComment
-
Re: How to check configuration on a modem
that should work as long as it has hardware handshaking, not just tx&rx - i suspect your cable may be wrong.
is it a modem cable or a serial extension?
it may have tx and rx (pins 2 & 3) the wrong way around among others.Comment
-
Re: How to check configuration on a modem
You were right it was cable now i am inComment
-
Re: How to check configuration on a modem
What AT command would i input in hyperterminal to either qweary the modem or determine the timeout settings for carrier and inactivity?Comment
-
Re: How to check configuration on a modem
Just need figure out how to do this keep getting response ok but no settingComment
-
Re: How to check configuration on a modem
first use the terminal program i linked.
second, ati = information if i remember right.
read the pdf on at commands.
once you change them how you want, you have to save the settings with something like at&0 or something.
not done this shit for over a decade, but it's coming back slowly!
ath to hang-up the line,
atdt[fone-number] to lift the hook and dial (tone-dial)
atdp for pulse-dialing.Comment
-
Re: How to check configuration on a modem
I unzipped the file file it was a php file i was able to view it but how to i install that programComment
-
Re: How to check configuration on a modem
This all i getComment
-
Re: How to check configuration on a modem
PicAttached FilesComment
-
-
Re: How to check configuration on a modem
I downloaded the terminal that was linked but when I open it all it brings up is a bunch of code. Is there a specific way I am supposed to open it up?Comment
-
Re: How to check configuration on a modem
It is a windows/dos executable file. You must Run it not View it.Comment
-
Re: How to check configuration on a modem
The ati did not retrieve any information am i missing somethingComment
-
Re: How to check configuration on a modem
On the commandComment
-
This specification for the LENOVO ThinkSmart M920q Zoom Rooms can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the ThinkSmart M920q Zoom Rooms boardview and ThinkSmart M920q Zoom Rooms schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification,...09-12-2024, 01:58 PM
-
Hellow guys , i really need your help here.
Lately i have a problem with My TL 866 II Plus programmer, and to be more specific many times on various IC ( Winbond, Gigadevice Mx) i get Check ID Error while i am trying to read the IC. Has already been detected without any kind of problem, but the only to read them is to uncheck every time the "Check ID " option. After that i can read it erase it and re-program it only to get another error at then end saying that can not verify the programing went well so i have program failed. So i am trying to find out what is going on? I... -
So I am trying to repair broken thunderbolt FW on X1 Yoga Gen 2. The EEPROM chip is WINBOND 25Q80DVNIG. I already do a back-up and erase. But when I try to wrote new FW, it was successfull, but when I tried to read it, it still blank. when I try to do a blank check, it gave me instant error in address 0. I already tried two CH341A, already did the 3.3v fix mod, using AsProgrammer, NeoProgrammer, Colibri, and CH341A 1.29. But the problem still occurred. What I did wrong here? Can anyone help me? Thanks in advance. Here is the log in Colibri :
...Code:Checking for blank... (Press
-
Hey there,
I got a HP Elitebook 820 G3 Engineering Sample Laptop and I want to use it. Besides the difficult things at the ES-BIOS I have a big problem by saving the main BIOS settings.
The laptop does not have a big battery because it was dead, but I already plugged in a new CMOS battery.
It takes about 5min without power and the BIOS settings are lost. Unfortunatly I dont understand why the BIOS settings are only saved with power connected and this is the reason why I registered here.
As written above, I plugged in a new CMOS cell and checked... -
ASUS ROG Ally X - (Handheld Gaming PC)
Model No: RC72LA
Serial No: SBNVKD001014459
Hi all, I've spent the past week digging through the forums and guides to try correct my foolish mistake of changing hidden settings while tinkering around, and to be honest my heads overloaded so I'm hoping you'll be able to help.
I used a tool called 'Smokeless-UMAF' to access usually hidden settings in the bios. I tweaked one or two 'safe' things but made the mistake of tweaking a lot of settings under 'USB/Thunderbolt Configurations' when I didn't know what they did. For...
Comment