12" Macintosh Monochrome CRT monitor
Collapse
X
-
Tags: None
-
Re: 12" Macintosh Monochrome CRT monitor
Where is this part located in the monitor?Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809 -
Re: 12" Macintosh Monochrome CRT monitor
12" macintosh monochrome monitor
the part is right behind the power plug, the the Hot side of the plug first goes thru a large resistor then to this.
This is an old monitor the only reason I am trying to fix it is it is parts of a display for a museum and can't easily be replaced
the fuse is intactLast edited by Larry Offley; 05-05-2016, 07:17 PM.Comment
-
Re: 12" Macintosh Monochrome CRT monitor
I was able to source another 12" Monochrome Macintosh monitor that works. And got the Installation ready for opening. I would still like to fix the other one as a backup though. If anyone has a schematic for it that would be helpful.
ThanksComment
-
Re: 12" Macintosh Monochrome CRT monitor
Its most likley a current inrush thermister NTC. Is it in line with the ac circuit, are there any board markings for it (ie ntc1 or th602) it be could be connected between the ac line in and the bridge rectifier ac in.
If you open the white plastic there should be a disc between two metal contacts, you could try measuring the the disc, it should be around 3-5 ohms cold.Last edited by R_J; 05-12-2016, 05:50 PM.Comment
-
Re: 12" Macintosh Monochrome CRT monitor
numbers on the board
630-0001-a
820-0258-e (that looks like the board numbers they still use)
it says apple computer systems on the boardComment
-
Re: 12" Macintosh Monochrome CRT monitor
Its most likley a current inrush thermister NTC. Is it in line with the ac circuit, are there any board markings for it (ie ntc1 or th602) it be could be connected between the ac line in and the bridge rectifier ac in.
If you open the white plastic there should be a disc between two metal contacts, you could try measuring the the disc, it should be around 3-5 ohms cold.
all of the resistors and caps have marking next to them but nothing next to this.Last edited by Larry Offley; 05-12-2016, 06:24 PM.Comment
-
Re: 12" Macintosh Monochrome CRT monitor
This is a schematic I have of an apple color monitor that shows the th602 thermistor, I suspect the mono monitor has a silmilar ac input circuit.
If you ignore the degaussing circuit. you can see where your thermistor would be located, It that is it you could place a short (piece of wire) in its place just to check the monitor, but don't leave it that way as it would eventually blow the fuseAttached FilesComment
-
Re: 12" Macintosh Monochrome CRT monitor
The inrush limiter burn up can be due to short circuit, I would check the rectifiers, check the resistance between the +/- legs of the main filter cap at leastNever stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: 12" Macintosh Monochrome CRT monitor
I will check that. The monitor was running inside a plexiglass box and looks like it was overheating.Comment
Related Topics
Collapse
-
by momakaNormally, I never post repairs this quick after I do them, because… I am usually very slow.
But today, I’m making an exception here. Why? No idea. Perhaps only because the repair details are still “fresh” in my head… which is ironic, given this is a 16 year old monitor that hardly anyone will care about today. It is new to me, though.
I picked it up last November from someone on my local Craigslist. It wasn’t very close to where I live, but was close to a family friend that I had to go visit anyways. So after watching the posting on Craigslist for a few weeks and seeing it getting...
-
Channel: Troubleshooting Computer Displays
-
-
by ant3202Hi Everyone
Lately I am experiencing the deja-vu incident on one of the led monitor like this.
https://www.badcaps.net/forum/troubl...lashing-on-off
The monitor is HP 27es LED Monitor
https://h30434.www3.hp.com/t5/Deskto...e/td-p/6804692
The monitor will randomly blackout and display no signal and will recover again.
Sometimes need to power and off again to restore the display but...-
Channel: Troubleshooting Computer Displays
-
-
by Rick_1234Good evening, gentlemen.
I have a problem with my monitor. It turns off after a few seconds or flickers. Shining a flashlight on the screen doesn't show any image, so I guess it's not the "2 seconds to dark" I read in the forum.
To turn it back on, I have to press the power button twice. Then after a few seconds it turns off again or flickers. See video.
https://drive.google.com/file/d/1L6S...ew?usp=sharing
Things I tried
- Bought a new AC adapter thinking that was the problem but the problem...-
Channel: Troubleshooting Computer Displays
-
-
by momakaLooking through my repair pictures and notes, it's been a long time since I posted anything in the LCD monitors section. So here goes that.
I'm dedicating this thread to one of the very first LCD monitors I repaired (if not the first one), which was more than 10 years ago now. The monitor is a Wise Wing, model F199. It's a 19” CFL-backlit LCD. I got it for free off of Craigslist in 2009 from a guy, who said he bought it for cheap from Wallmart and the monitor worked only for a little less than 2 years before quitting.
When I saw the Craigslist post, I wasn't...-
Channel: Troubleshooting Computer Displays
-
-
by sew333My pc:
10850K stock 4800mhz stock Kraken X73 good temps
2x16 GB DDR4 GSKILL 3000mhz XMP
Seasonic Tx-850 Ultra Titanium
Gigabyte Rtx 3090 Gaming OC
Aorus Z490 Pro Gaming
1 TB SSD
4 weeks ago i launched Metro Exodus Enhanced and during cinematic advertisement part ( 30 fps ), pc just shutdown.
Also monitor flickered with NO SIGNAL 10 seconds after shutdown. So only monitor and pc was affected.
Next i pressed only power button, rebooted again and its fine again. Happened once and i cant reproduce.
Power... - Loading...
- No more items.
Comment