Could not find anything on this monitor doing a search in the forum. This monitor is really nice so I would like to repair it if possible.
I have replaced all caps with low ESR good brands Panasonic, Nichicon etc.
I have checked all fuses and they are good. Also checked all resistors and small diodes. I am down to two Schottky (I think) Diodes and one mosfet (I think) on Heat Sinks.
I need some help in checking the readings I have gotten, to see if these parts are good or not.
Diode Setting on DMM
D906 Schottky #1 Pin 1 - 2 = 1.99v after hitting this reading the meter flips to O.F
2- 3 = .242v
D905 Schottky #2 Pin 1 - 2 = 1.621v
2 - 3 = .148v
Ohms setting on DMM
Q901 Mosfet G - S = 9.99 Kohms
G - D = 8.19 Mohms
S - D = 8.19 Mohms
Thanks for the help.
I have replaced all caps with low ESR good brands Panasonic, Nichicon etc.
I have checked all fuses and they are good. Also checked all resistors and small diodes. I am down to two Schottky (I think) Diodes and one mosfet (I think) on Heat Sinks.
I need some help in checking the readings I have gotten, to see if these parts are good or not.
Diode Setting on DMM
D906 Schottky #1 Pin 1 - 2 = 1.99v after hitting this reading the meter flips to O.F
2- 3 = .242v
D905 Schottky #2 Pin 1 - 2 = 1.621v
2 - 3 = .148v
Ohms setting on DMM
Q901 Mosfet G - S = 9.99 Kohms
G - D = 8.19 Mohms
S - D = 8.19 Mohms
Thanks for the help.
Comment