phillips HTS3051B/F7 Bluray/surrond system....

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • zylcho
    Padawan Learner
    • May 2010
    • 52
    • USA
    #1

    phillips HTS3051B/F7 Bluray/surrond system....

    Would not power on, replaced fuze and plugged in and 2 of the 6 resisters/rectifiers(?) mounted to the aluminum heatsink instantly burned up. Looks like they are marked as FMXG22.

    If I replace these what are the odds it will function, or could there be other possible damage?

    I searched for that exact model number and came up with squat, is there any other way to properly identify without schematics?

    Thank you for your time.
    Attached Files
    Last edited by zylcho; 11-26-2012, 11:34 AM.
    Tags: None
    • selldoor
      Slow Learner
      • Dec 2010
      • 7870
      #2
      Re: phillips HTS3051B/F7 Bluray/surrond system....

      If the original fuse was blown you should have done some tests before just replacing. It is a bit odd it didnt just blow again- did you use correct size.

      There is quite a bit of yellow/brown glue which may also be shorting try and remove it all.

      Can find any FMX-G22 to buy but here is the datasheet
      http://www.alldatasheet.com/datashee...N/FMX-G22.html

      If you get the main characteristics you should be able to find something similar.
      Please upload pictures using attachment function when ask for help on the repair
      http://www.badcaps.net/forum/showthread.php?t=39740

        Comment

        • midibob
          Badcaps Veteran
          • Nov 2008
          • 285
          #3
          Re: phillips HTS3051B/F7 Bluray/surrond system....

          Is this what you are looking for?

          http://elektrotanya.com/philips_hts3.../download.html

          Good luck
          Midibob

            Comment

            • zylcho
              Padawan Learner
              • May 2010
              • 52
              • USA
              #4
              Re: phillips HTS3051B/F7 Bluray/surrond system....

              Welp my technical skill with puters dont mean crap as I failed the test to gain access lol. Thank you anyway.

                Comment

                • tom66
                  EVs Rule
                  • Apr 2011
                  • 32560
                  • UK
                  #5
                  Re: phillips HTS3051B/F7 Bluray/surrond system....

                  No need to use the test... wait about 15 seconds for the "Get Manual" link to appear in tiny text...
                  Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                  For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • learnmore
                      Service manual req Phillips 75PUS6754/12
                      by learnmore
                      Hello Community,

                      Would welcome any help on getting a service manaula for the above model (Phillips 75PUS6754/12) TV or anything similar.

                      Picture intermittently works fine for a day or a minuite then goes off, but backlights appear to remain on.

                      I thinking troubleshooting TV or using a tape method on the panel but would like some guidance on tracing the signals accurately rather than a trail and error.

                      Thanks in advance,
                      LM
                      11-13-2023, 04:58 AM
                    • Bloopeta
                      Phillips 58PUS7805/12 No Picture
                      by Bloopeta
                      Phillips 58PUS7805/12, was told it had sound no picture, sometimes picture would come back then go again?

                      From what I have seen myself, its just blank illuminated screen. Tried unplugging each ribbon cable from Tcon in turn.

                      When one is unplugged, I get half sceen, clear picture.

                      With other unplugged, get half screen but with thin horizontal lines

                      Any ideas? Or is it likely a bad panel?...
                      03-10-2023, 02:08 PM
                    • awyatt2
                      Phillips 65pfl6502
                      by awyatt2
                      Phillips 65pfl6502 I came across this set stuck on ble screen, no menu no sound all inputs dead. I'm thinking main board. The tcon wouldn't stop sound. Right or wrong.
                      03-29-2022, 07:41 PM
                    • unimatrix93
                      Phillips 55PUS6561/12 EEPROM Bin file
                      by unimatrix93
                      Hello there!

                      I'm looking for a EEPROM bin file for a Phillips 55PUS6561/12.
                      Chassis: QM16.3E_LA
                      Motherboard: 715G772-M01-B00-005K

                      Thanks in advance! 😊
                      12-08-2021, 02:52 AM
                    • jackal68
                      Phillips 32PFL4507/F7B humming sound, no power
                      by jackal68
                      Hi

                      Im trying to fix this Phillips 32" led tv, 32PFL4507/F7B. There is a humming sound when the power plug is connected. The humming goes away when I disconnect the cable from the powerboard to the mainboard. The humming seems to be around the mosfet/330uf capacitor area of the powerboard.

                      I have taken out the mosfet and tested it with a DMM and it seems to be fine. I also checked the voltages going to the mainboard and they're totally off. I'm not getting 3.3v standby (no light at the front), where it is supposed to be 24v, i'm getting 2.3v, and where it is supposed...
                      06-22-2021, 10:47 AM
                    • Loading...
                    • No more items.
                    Working...