Re: Stereo Setup Assistance
Am I going to damage my Receiver without running my 6 ohm Speakers in Parallel?
Am I going to damage my Receiver without running my 6 ohm Speakers in Parallel?
-
-
Last edited by PCBONEZ; 04-26-2011, 05:56 PM.Mann-Made Global Warming.
- We should be more concerned about the Intellectual Climate.
-
Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
- Dr Seuss
-
You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
-
Comment
-
Re: Stereo Setup Assistance
Um, running 2x 6 ohm speakers in parallel means impedance is 3 ohms = more difficult load = not good. Series i think is what you were thinking about.
Even if the receiver is only rated for 8 ohm operation, 6 ohm speakers are going to be okay, especially since you're going to be using just two channels. I wouldn't try it with 4 ohm ones though.A working TV? How boring!Originally posted by PeteS in CAComment
-
Re: Stereo Setup Assistance
Do I need to run these in series then to be on the safe side?Comment
-
Re: Stereo Setup Assistance
http://www.1728.com/resistrs.htm
http://www.ohmslawcalculator.com/ohm...calculator.phpMann-Made Global Warming.
- We should be more concerned about the Intellectual Climate.
-
Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
- Dr Seuss
-
You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
-
Comment
-
Re: Stereo Setup Assistance
I rocked the whole Neiborhood today with Metallica's Death Magnetic CD Never once did I drive them into distortion or clipping not with my 100 watt high performance receiver.Comment
-
Re: Stereo Setup Assistance
I used to wake the barracks up at 5AM with Jimi Hendrix, Star Spangled Banner.
Our barracks was 3 stories high.
.Mann-Made Global Warming.
- We should be more concerned about the Intellectual Climate.
-
Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
- Dr Seuss
-
You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
-
Comment
-
Re: Stereo Setup Assistance
You guys have already spent too much time on this topic. The people that don`t understand this keep buying speakers and amps (good for the economy).
I have never ruined good speakers with a good amp!
If you have, there was an alcoholic beverage near by.Comment
-
I have a Inspiron 11 3185, and in the BIOS setup under Security it shows "Locked Setup", which limits pretty much everything in the BIOS. I'm using bios-pw.org to generate the codes for the hash, but they never work for the Locked Setup password. The codes generated for the System password and the HDD password work fine, but the code for the Locked Setup password always fails. I don't understand, if it works for the first two, why is it not working for the Locked Setup p/w? Since I can't disable it, anytime I reboot, even after a Windows update, I have to go through the hassle of generating... -
For today's thread, I have a KingWin ABT-650MM ATX PSU. Official web page with the PSU specs is still up and can be found here:
http://www.rmac.kingwin.com/products.../abt_650MM.asp
I just can't help it when I see a broken / for parts PSU on eBay that's listed for cheap and looks at least somewhat interesting. Well, OK, I won't lie – on the outside, this PSU looks anything but interesting. It's a plain gray box with colorful “spaghetti cables”.
What mostly drew me into buying it is its 2x PCI-E power connectors... -
Hi.
I bought a Cheap HIFI to use as my PC output and speakers and forgot to check if it had an input. It doesn't.
Is there any way to add a stereo input. I have a bunch of Phono sockets I am not using.
Where in the circuit is the best place to solder the 3 stereo input wires?
This is the model and schematics:
https://www.manualslib.com/manual/91...7l.html#manual -
Reset the tv as internet connection not working, connected to router but no internet.
Did a factory reset and completed the initial setup process but now just freezes on 'Setup Complete' page.
Going into service menu it says 'Failure' at the top of the page and unable to access the 'control' screen.
Its already on T-HKM6DEUC1570.0 fw.
Are the SVC reset options likely to help here?
options are
apps reset
svc reset
spi flash reset
data sync reset
Any help appreciated. -
Hi sirs. please help
Dell Inspiron 5775 bios locked "Unlock Setup fail"
After generating the Password Recovery code, I go to the “Security” tab - “Locked Settings” - it says “Unlock Settings? I tried many wrong passwords and it shows an error to unlock settings [ Press any key ].
What I did:
I read the bios dump.
Downloaded the bios update to 1.6.0 from the official Dell website, extracted the dump from it, updated the bios, but the problem persisted. Please help me to solve the problem....
Comment