Lets play name this connector...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • NxB
    Badcaps Legend
    • Feb 2009
    • 1595

    #1

    Lets play name this connector...

    What is the official name for this connector so that I can buy the male end. I know I've seen similar ones on thinkpad LCDs.

    Attached Files
  • Phaihn
    Badcaps Veteran
    • Jan 2009
    • 842
    • Canada

    #2
    Re: Lets play name this connector...

    You lost me. :L
    My Computer.
    AMD APU A4-3300 2.5ghz 1mb cache
    Motherboard GigaByte GA-A75M-S2V
    Kingston HyperX Blue DDR3 8GB (2x4GB)

    SB Audigy 2 ZS [B800] Sound Card
    500GB WD Caviar® Blue™
    1 Terabyte WD Caviar® Black™
    2 Terabyte WD Caviar® Black™

    Comment

    • 370forlife
      Large Marge
      • Aug 2008
      • 3112
      • United States

      #3
      Re: Lets play name this connector...

      Yelling connector?

      Comment

      • NxB
        Badcaps Legend
        • Feb 2009
        • 1595

        #4
        Re: Lets play name this connector...

        Ok, to be specific the white connector at the top. I want to buy the male end that plugs into this. I don't know what its called (ie, RJ-45, DB-9). If someone knows what this style of connector is called.

        Comment

        • Phaihn
          Badcaps Veteran
          • Jan 2009
          • 842
          • Canada

          #5
          Re: Lets play name this connector...

          oh oh i know Domo kun.
          My Computer.
          AMD APU A4-3300 2.5ghz 1mb cache
          Motherboard GigaByte GA-A75M-S2V
          Kingston HyperX Blue DDR3 8GB (2x4GB)

          SB Audigy 2 ZS [B800] Sound Card
          500GB WD Caviar® Blue™
          1 Terabyte WD Caviar® Black™
          2 Terabyte WD Caviar® Black™

          Comment

          • lucky13
            Badcaps Veteran
            • Aug 2007
            • 412

            #6
            Re: Lets play name this connector...

            Darn, I should have kept that 4" thick Digikey catalog. Might spot it going from beginning to the end....

            I've seem similiar ones in iPods....

            Sorry I duuno

            Comment

            • Toasty
              Badcaps Legend
              • Jul 2007
              • 4171

              #7
              Re: Lets play name this connector...

              What type/make board is that on?
              Dimensions? Width Height ?
              Contact pitch (center to center)?
              Brand/manufacturer marks or numbers anywhere?
              What does it mate to?
              Can you show the matching connector?

              Toast
              veritas odium parit

              Comment

              • kikkoman
                Badcaps Veteran
                • Jul 2007
                • 691

                #8
                Re: Lets play name this connector...

                http://www.jst-mfg.com/product/detail_e.php?series=147

                they're the only mfg i found that makes right-angle connectors of that type.

                don't know if the pitch is right.
                "Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin slitting throats." - H.L. Mencken

                Comment

                • ratdude747
                  Black Sheep
                  • Nov 2008
                  • 17136
                  • USA

                  #9
                  Re: Lets play name this connector...

                  well at least we have a connector type. search around some. you moght find it elsewhere.
                  sigpic

                  (Insert witty quote here)

                  Comment

                  • NxB
                    Badcaps Legend
                    • Feb 2009
                    • 1595

                    #10
                    Re: Lets play name this connector...

                    Yes, right angle connector. It appears to be the Toshiba Mips JTAG port on the bottom of an Cannon HV20/30 logic board. It has no noticeable markings that I see.

                    Comment

                    • lucky13
                      Badcaps Veteran
                      • Aug 2007
                      • 412

                      #11
                      Re: Lets play name this connector...

                      These connectors are so small that they typically may only have a graphic symbol on it that's all. I'd say Kikkoman has found it for you.

                      Here is from Digikey catalog:
                      http://search.digikey.com/scripts/Dk...MCS-G-TF(N)-ND

                      Comment

                      • NxB
                        Badcaps Legend
                        • Feb 2009
                        • 1595

                        #12
                        Re: Lets play name this connector...

                        Has 60 pins, connector only has 20. I'll have to email them and ask if they make one like that.

                        Comment

                        • Toasty
                          Badcaps Legend
                          • Jul 2007
                          • 4171

                          #13
                          Re: Lets play name this connector...

                          They only have the 60 position in the JMC series. (non-stocked)

                          Do a DigiKey search on: JMDSS
                          Then check mark the "In Stock" box and select 20 in the "Number of Positions" below that.

                          Perusing those results yields this as a possible candidate:
                          http://search.digikey.com/scripts/Dk...=455-1894-1-ND

                          Review the JMD datasheet info to verify the size.

                          https://cdn.badcaps-static.com/pdfs/...f4dedcf781.pdf

                          Minimum quantity is 10 @ $1.31100 or $13.11

                          Toast
                          veritas odium parit

                          Comment

                          • NxB
                            Badcaps Legend
                            • Feb 2009
                            • 1595

                            #14
                            Re: Lets play name this connector...

                            Thanks. I'll measure and see. It might be a pain to solder wires to the male because of the SMD mount but at least we have a candidate.

                            Comment

                            • weirdlookinguy
                              Badcaps Legend
                              • Sep 2007
                              • 1638

                              #15
                              Re: Lets play name this connector...

                              Lvds?

                              Comment

                              Related Topics

                              Collapse

                              • 5mall5nail5
                                Help identifying connector for ASUS 4090 Strix RGB LED connector
                                by 5mall5nail5
                                Hi All -

                                I had replaced my ASUS 4090 Strix cooler with a waterblock and put the stock cooler on the shelf. Was moving it and snagged my sweater on the connector and pulled the wires out of the pins on the RGB connector. I tried to get them back on but its too small so I opened the stamped pins and tried to solder but its not a good repair and the wire broke on reinstallation.

                                Looking to replace the connector on the cable side and get pins to crimp onto a new cable. Bought random JST and such but nothing is correct. Can anyone help identify the connector and possibly matching...
                                05-04-2025, 07:47 AM
                              • bussincaps
                                MacBook Pro Mid-2014 A1398 Retina LED Controller Connector [First Repair (Disaster)]
                                by bussincaps
                                Hello All,

                                tl;dr: minimal electronics experience and my first repair, lifted 8 pads off the laptop display LED controller board when attempting a connector replacement, options are attempting pad repair or jump wiring.

                                Laptop Model: MacBook Pro 15 Mid-2014 Retina, A1398 MGXA2LL/A
                                eDP Display: Samsung LSN154YL01-A02, assembly sold as Apple part 661-8310
                                Soldering Equipment: Hakko FX-888D w/ T-18 tips (Chisel, Conical, Bevel types)

                                I needed to replace the 30-pin I-PEX Cabline connector (labeled J8300 in the Apple 820-3662 mainboard schematics),...
                                08-03-2023, 12:57 PM
                              • michhak
                                Toshiba Satellite M50-A keyboard connector on LA-A481P motherboard
                                by michhak
                                Hi guys,
                                i have a damaged keyboard connector on my older Toshiba Satellite M50-A laptop. I know there is LA-A481P motherboard. In attachment pictures there is a real looking connector and i also found a schematic to the connector. But i need help with finding a real electronic part to replace the damaged connector. e.g. on aliexpress (or different page).
                                It is 34pin connector and the length from pin n.1 to pin n.34 is 26mm. So it means a pitch length is 0.764 mm. I have seen connectors with 0.5mm , 0.7mm , 0.8mm and 1mm pitch length. But not with 0.75. Is it some special custom connector...
                                11-17-2021, 05:45 AM
                              • howardc64
                                A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
                                by howardc64
                                Problem

                                This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
                                08-04-2024, 10:36 PM
                              • m1ch43lzm
                                70mai Dash Cam A510 - help identifying connector on camera module
                                by m1ch43lzm
                                Hi everyone
                                I have a 70mai Dash Cam A510 which failed after about 3 months of being installed in my car, likely due to heat, i got it from aliexpress so no point in trying to return it for warranty (and shipping it back would cost me almost the same as a new one from ali)
                                The camera would boot loop showing 70mai logo on the screen, sometimes it would boot fine then the live view would freeze or display purple lines

                                I already took it apart, and found out that the camera boots fine if i unplug the camera module from the main PCB, sometimes "playing" with the connector...
                                05-11-2025, 06:02 PM
                              • Loading...
                              • No more items.
                              Working...