Hi guys,
i have a damaged keyboard connector on my older Toshiba Satellite M50-A laptop. I know there is LA-A481P motherboard. In attachment pictures there is a real looking connector and i also found a schematic to the connector. But i need help with finding a real electronic part to replace the damaged connector. e.g. on aliexpress (or different page).
It is 34pin connector and the length from pin n.1 to pin n.34 is 26mm. So it means a pitch length is 0.764 mm. I have seen connectors with 0.5mm , 0.7mm , 0.8mm and 1mm pitch length. But not with 0.75. Is it some special custom connector or can i use 0.8 pith length connector?
I have found some connector
https://www.aliexpress.com/item/1005001826988319.html
but it looks a little different in locking mechanism. i know that flat cable is put into original connector with contacts towards top side (away from the board). do you think it is compatible?
I am quite lost now, can you help me to find compatible or exact connector?
thanks
i have a damaged keyboard connector on my older Toshiba Satellite M50-A laptop. I know there is LA-A481P motherboard. In attachment pictures there is a real looking connector and i also found a schematic to the connector. But i need help with finding a real electronic part to replace the damaged connector. e.g. on aliexpress (or different page).
It is 34pin connector and the length from pin n.1 to pin n.34 is 26mm. So it means a pitch length is 0.764 mm. I have seen connectors with 0.5mm , 0.7mm , 0.8mm and 1mm pitch length. But not with 0.75. Is it some special custom connector or can i use 0.8 pith length connector?
I have found some connector
https://www.aliexpress.com/item/1005001826988319.html
but it looks a little different in locking mechanism. i know that flat cable is put into original connector with contacts towards top side (away from the board). do you think it is compatible?
I am quite lost now, can you help me to find compatible or exact connector?
thanks
Attached Files
Comment