What is the official name for this connector so that I can buy the male end. I know I've seen similar ones on thinkpad LCDs.
Attached Files
-
-
Re: Lets play name this connector...
You lost me. :LMy Computer.
AMD APU A4-3300 2.5ghz 1mb cache
Motherboard GigaByte GA-A75M-S2V
Kingston HyperX Blue DDR3 8GB (2x4GB)
SB Audigy 2 ZS [B800] Sound Card
500GB WD Caviar® Blue™
1 Terabyte WD Caviar® Black™
2 Terabyte WD Caviar® Black™ -
Re: Lets play name this connector...
Yelling connector?
Comment
-
Re: Lets play name this connector...
Ok, to be specific the white connector at the top. I want to buy the male end that plugs into this. I don't know what its called (ie, RJ-45, DB-9). If someone knows what this style of connector is called.Comment
-
Re: Lets play name this connector...
oh oh i know Domo kun.My Computer.
AMD APU A4-3300 2.5ghz 1mb cache
Motherboard GigaByte GA-A75M-S2V
Kingston HyperX Blue DDR3 8GB (2x4GB)
SB Audigy 2 ZS [B800] Sound Card
500GB WD Caviar® Blue™
1 Terabyte WD Caviar® Black™
2 Terabyte WD Caviar® Black™Comment
-
Re: Lets play name this connector...
Darn, I should have kept that 4" thick Digikey catalog. Might spot it going from beginning to the end....
I've seem similiar ones in iPods....
Sorry I duunoComment
-
Re: Lets play name this connector...
What type/make board is that on?
Dimensions? Width Height ?
Contact pitch (center to center)?
Brand/manufacturer marks or numbers anywhere?
What does it mate to?
Can you show the matching connector?
Toastveritas odium paritComment
-
Re: Lets play name this connector...
http://www.jst-mfg.com/product/detail_e.php?series=147
they're the only mfg i found that makes right-angle connectors of that type.
don't know if the pitch is right."Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin slitting throats." - H.L. MenckenComment
-
Re: Lets play name this connector...
well at least we have a connector type. search around some. you moght find it elsewhere.sigpic
(Insert witty quote here)Comment
-
Re: Lets play name this connector...
Yes, right angle connector. It appears to be the Toshiba Mips JTAG port on the bottom of an Cannon HV20/30 logic board. It has no noticeable markings that I see.Comment
-
Re: Lets play name this connector...
These connectors are so small that they typically may only have a graphic symbol on it that's all. I'd say Kikkoman has found it for you.
Here is from Digikey catalog:
http://search.digikey.com/scripts/Dk...MCS-G-TF(N)-NDComment
-
Re: Lets play name this connector...
Has 60 pins, connector only has 20. I'll have to email them and ask if they make one like that.Comment
-
Re: Lets play name this connector...
They only have the 60 position in the JMC series. (non-stocked)
Do a DigiKey search on: JMDSS
Then check mark the "In Stock" box and select 20 in the "Number of Positions" below that.
Perusing those results yields this as a possible candidate:
http://search.digikey.com/scripts/Dk...=455-1894-1-ND
Review the JMD datasheet info to verify the size.
https://cdn.badcaps-static.com/pdfs/...f4dedcf781.pdf
Minimum quantity is 10 @ $1.31100 or $13.11
Toastveritas odium paritComment
-
Re: Lets play name this connector...
Thanks. I'll measure and see. It might be a pain to solder wires to the male because of the SMD mount but at least we have a candidate.Comment
-
Re: Lets play name this connector...
Lvds?Comment
-
Hi All -
I had replaced my ASUS 4090 Strix cooler with a waterblock and put the stock cooler on the shelf. Was moving it and snagged my sweater on the connector and pulled the wires out of the pins on the RGB connector. I tried to get them back on but its too small so I opened the stamped pins and tried to solder but its not a good repair and the wire broke on reinstallation.
Looking to replace the connector on the cable side and get pins to crimp onto a new cable. Bought random JST and such but nothing is correct. Can anyone help identify the connector and possibly matching... -
Hello All,
tl;dr: minimal electronics experience and my first repair, lifted 8 pads off the laptop display LED controller board when attempting a connector replacement, options are attempting pad repair or jump wiring.
Laptop Model: MacBook Pro 15 Mid-2014 Retina, A1398 MGXA2LL/A
eDP Display: Samsung LSN154YL01-A02, assembly sold as Apple part 661-8310
Soldering Equipment: Hakko FX-888D w/ T-18 tips (Chisel, Conical, Bevel types)
I needed to replace the 30-pin I-PEX Cabline connector (labeled J8300 in the Apple 820-3662 mainboard schematics),... -
Hi guys,
i have a damaged keyboard connector on my older Toshiba Satellite M50-A laptop. I know there is LA-A481P motherboard. In attachment pictures there is a real looking connector and i also found a schematic to the connector. But i need help with finding a real electronic part to replace the damaged connector. e.g. on aliexpress (or different page).
It is 34pin connector and the length from pin n.1 to pin n.34 is 26mm. So it means a pitch length is 0.764 mm. I have seen connectors with 0.5mm , 0.7mm , 0.8mm and 1mm pitch length. But not with 0.75. Is it some special custom connector... -
Problem
This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached.... -
Hi everyone
I have a 70mai Dash Cam A510 which failed after about 3 months of being installed in my car, likely due to heat, i got it from aliexpress so no point in trying to return it for warranty (and shipping it back would cost me almost the same as a new one from ali)
The camera would boot loop showing 70mai logo on the screen, sometimes it would boot fine then the live view would freeze or display purple lines
I already took it apart, and found out that the camera boots fine if i unplug the camera module from the main PCB, sometimes "playing" with the connector...
Comment