LCD Clock digit faded and partly missing

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • freakytiki4u
    Coolest Member
    • Aug 2009
    • 130
    • United States
    #1

    LCD Clock digit faded and partly missing

    Anyone know why this happens and how to fix it or where I may send the clock to be fixed? The #24 is what you see and part of the 2 is missing. Everything else works perfectly except that digit. New batteries are installed. Thank you sincerely for any reply and info
    Attached Files
    Tags: None
    • freakytiki4u
      Coolest Member
      • Aug 2009
      • 130
      • United States
      #2
      Re: LCD Clock digit faded and partly missing

      I decided to just replace the clock but ty for looking

        Comment

        • b700029
          Banned
          • Sep 2010
          • 640
          #3
          Re: LCD Clock digit faded and partly missing

          Good decision, that is caused by bad ITO which cannot be easily fixed.

            Comment

            • kc8adu
              Super Moderator
              • Nov 2003
              • 8829
              • U.S.A!
              #4
              Re: LCD Clock digit faded and partly missing

              or a fouled zebra strip.clean it and the display edge as well as the board contact area.
              i used an alcohol prep on a fluke 73 a while back.was missing segments and faded looking.looks new now.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • fichamba
                  MBAir 13” A1466 missing SPI clock
                  by fichamba
                  Hello everybody:
                  I have an A1466 (MoBo 820-00165-A) which is driving me crazy.
                  It has all voltages, everything seems OK. It starts after connecting the Apple charger (fan spins normally; maybe a bit later than in a working board that I have side by side). The only (!!!) missing signal is the SPI clock.
                  I have measured at pin 6 of U6100 (the SPI), and I have nothing in the scope. Neither in the data in/out pints I have data train in the scope (just a little bit sometimes).
                  The working board is showing me fixed clock pulse at pin 6 of its SPI. I'm crazy about this....
                  02-16-2022, 09:16 AM
                • shelby5041
                  clock radio / radio lifespan?
                  by shelby5041
                  hi
                  ive got a modern digital clock radio approx 15yrs old

                  my question is how long can a clock radio or a simple radio last ss farcas operating hours?

                  since elec components have limited hour lifecspan i would imagine the radio or clock radio would eventually fail.

                  the reason i ask is because i have my clock radio on radio function 24/7 for the past 7 years and its still working fine....i leave the radio on ..never turn off past 7years...thats approx 60000 hours

                  it uses very little power just a few watts i would imagine that may have something...
                  09-14-2024, 03:30 AM
                • ugamazing
                  820-02020 PPBUS_AON missing
                  by ugamazing
                  Board had no history of liquid; unsure of drop history, but no signs of damage of any kind worth noting.

                  Charger sitting at 5v/0a. PPBUS is at 1.9v-0.9v steady cycle (peaks, drains, loops). Confirmed CHGR_EN_MVR is missing, but DCIN was reaching ISL just fine, so replaced ISL--no change at all. Confirmed pp3v8_aon is also missing--and being unsure *exactly* which signal appears first (or if they are simultaneous), I inspected PMU/U8100 area and found no shorts, but also found PP3V8_AON_MPMU_ISNS_VIN missing (not shorted). Replaced U8100 just in case (have had them fail in weird ways),...
                  02-05-2025, 04:21 PM
                • jpreza
                  Apple NVIDIA AGP GeForce 6800 GT Dual Link DVI+DVI outputs 603-6338 missing caps!
                  by jpreza
                  Hi everyone,

                  I recently acquired this card from a seller who was selling a PowerMac G5 for parts. He mentioned that the video card was probably broken too.

                  Upon closer inspection, I can tell the reason why it won't work: it's missing a bunch of CAPS! (it's also missing an inductor - 1.0uH).

                  It's a nice card as it's one of the few AGP cards that will support 2560 x 1600 resolution on a PowerMac G5 using a 30" Cinema Display.

                  Looking at the card, it appears to be missing the following:

                  1x 1.0uH inductor - orange square
                  2x...
                  1 Photo
                  11-01-2024, 10:54 PM
                • gurj1979
                  Asus Zenbook UX431DA / UM431D - Ryzen - missing PWM Fan Signal.
                  by gurj1979
                  Hey guys.

                  Need help with this one.
                  Fan not spinning due to missing PWN Fan signal.
                  Also 5 seconds from powering up it freezes, unless in BIOS.
                  But as soon as Windows starts to load, it will freeze.
                  CPU is COLD / Room temp when it freezes.

                  I've replaced the CPU, same problem.
                  Replaced SIO/KBC IT8987e and reprogrammed - same problem.
                  Replaced fan - same problem.
                  Replaced flex cable from board to daughterboard (which has fan connector on it) - same problem.
                  Checked the Thermal sensors around CPU and Board to the SIO/KBC and...
                  08-19-2024, 05:22 PM
                • Loading...
                • No more items.
                Working...