Test equipment rebadges

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • japlytic
    Badcaps Legend
    • Oct 2005
    • 2086
    • Australia
    #1

    Test equipment rebadges

    Somehow, I have managed to identify certain pieces of rebadged electronics to their OEM.
    If you know the rebadged model, there could be some hackability in it (especially if it runs on Linux!)

    So far, here are three models (Jaycar brand Digitech) I have matched to their OEM:
    QC-1929 = Hantek 6022BE
    QC-1932 = Atten ADS1022C
    QC-1936 = Hantek DSO4000C - it has the same cabinet as my Hantek HDG2000

    So if you can positively match a particular model of test equipment with its OEM model e.g. Digitech (Jaycar) and Hantek with specific model numbers, please post it here.
    My first choice in quality Japanese electrolytics is Nippon Chemi-Con, which has been in business since 1931... the quality of electronics is dependent on the quality of the electrolytics.
    Tags: None
    • neuron
      Senior Member
      • Feb 2013
      • 126
      • Portugal
      #2
      Re: Test equipment rebadges

      Originally posted by japlytic
      Somehow, I have managed to identify certain pieces of rebadged electronics to their OEM.
      If you know the rebadged model, there could be some hackability in it (especially if it runs on Linux!)

      So far, here are three models (Jaycar brand Digitech) I have matched to their OEM:
      QC-1929 = Hantek 6022BE
      QC-1932 = Atten ADS1022C
      QC-1936 = Hantek DSO4000C - it has the same cabinet as my Hantek HDG2000

      So if you can positively match a particular model of test equipment with its OEM model e.g. Digitech (Jaycar) and Hantek with specific model numbers, please post it here.
      Hi,
      I have exp. in Linux servers and general use (desktop).

      And Assemb. Hack
      Please provide more details.

      Regards,
      Ruy

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Fritter
          Your most useful test equipment.
          by Fritter
          Hi All,
          For some background, I passed an OND in electronics in the 80's. Life took me elsewhere, and I've finally got around to using it practically. My interest is in vintage electronics.
          My question is, other than a multimeter, what is the most used and useful piece of test equipment ?
          Thanks !
          06-07-2023, 12:23 PM
        • chth96
          How Can I test PWM DM0365R?
          by chth96
          Hello
          I have power adaptor(220V/input, 12V 1.2A/output) which has symptom of fluctuating output DC voltage between 11.5V-12.2V.
          So I opened its plastic case and when switched it on, I heard constant tik tik sound from inside its PCB.
          I measured DC voltage between negative and positive pin of the largest capacitor(400v 10uf) and it was measured contant 300V.
          I also measured ESR value of all capacitors and I noticed that one of capacitor(KMG 16v 470uf), which located in the secondary side, have high ESR value(10 ohm),So I replaced it with same specification NXH capacitor....
          06-18-2025, 04:14 PM
        • khelane
          test active pfc power with lamp test
          by khelane
          Hello
          I have a big problem and that is that in some cases when repairing active pfc power supplies I cannot work with a test lamp. I can only get help with 5 volts standby and for starting and starting I have to work without a lamp and this way there is a possibility of parts exploding and other parts being added.
          Sometimes with a multimeter test the problems can be reduced to some extent, but I had several cases that had to be tested on and online and recently two varistors exploded. They had terrible resistance because the power supplies were over 800 watts.
          Is there a way...
          06-03-2025, 01:00 AM
        • chronic519
          Mats / mods: detected and repaired GPU fault. Cant seem to test after!
          by chronic519
          Hello.

          GPU came in, green lines. Spent lots of time using to get the Mats / mods drive working (found on youtube).
          Found issue with a RAM block
          Replaced, green lines gone.
          Trying to test again, assuming getting the false positive. Originally had over 1K on a single bank. Now getting tosses low between banks.
          Used a good card to test and same results low errors 32+.

          I am just search for some form of command to do a full test on the GPU.
          I just ran the mats command with my good GPU and passed after roughly 40 min.
          The repaired one, ran...
          05-20-2025, 07:56 PM
        • alltvrepairs
          Lg TCon test pins for screen test
          by alltvrepairs
          Hi,
          i have a 65 Panasonic TX-65HX710E using vestel 17MB170 main and Lg tcon.

          Few drops of water fell probably near COF and have no display. Tried removing tabs but no.part of display present as if tcon fuse open. However 12v is present and tcon can be felt warm enough that supplies are present. Backlight and sound ok.

          Anyone knows if this TCon 6870c-0805A has any special test pins for rgb test?

          Appreciate your help....
          2 Photos
          06-13-2025, 06:33 AM
        • Loading...
        • No more items.
        Working...