-
36 Monitors, 3 TVs, 4 Laptops, 1 motherboard, 1 Printer, 1 iMac, 2 hard drive docks and one IP Phone repaired so far.... -
Re: Fluke 87 Cake
Cool! Does it have life time warranty or only good till the last byte?Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809 -
Re: Fluke 87 Cake
My opinion about it, is that it looks like soap opera, with fake applause.
Even FLUKE shared it on Tweeter.
But no, I do not find it as smart or authentic as idea.Comment
-
Re: Fluke 87 Cake
Next time put it on a stand checking something, maybe with some test leads. Awesome Job on it.Comment
-
Hello experts,
I recently purchased a used Fluke 123 Industrial Scopemeter from an online Japanese auction site (jauce.com). It has now been delivered. Unfortunately, I overlooked the fact that the seller neither guarantees its working condition nor accepts returns.
When I power it on, the backlight comes on, but there is no image on the screen. After opening the device, I noticed clear signs of previous soldering in several areas (photos attached). It seems someone attempted repairs before.
At this point, I'll have to try and fix it myself. Has anyone here... -
I am repairing a Fluke 335 clamp meter. After contacting fluke it appears there is no service manual or circuit board/ component list available. I have determined that there us a faulty PNP bipolar junction transistors shown in the pictures. I am having trouble sourcing this transistor. I pulled a good one off of the board and tested it with my component analyzer but I cannot find anything that matches the specifications. Any help locating this part or a replacement would be greatly appreciated.
Thanks... -
Need a new (used) DMM and there are two in the area for resonable prices.
The Agilent U1242A is 63 GBP (about 80 USD)
https://cdn.badcaps-static.com/pdfs/...4dc89c13fc.pdf
The Fluke 179 is 55 GBP (roughly $68.00)
https://www.fluke.com/en-us/product/...fluke-179-eda2
Kinda leaning towards the Agilent.
Anyone think that is a bad idea? -
See attached picture. I have a Fluke T100 Voltage Tester that the resistance and diode measurement isn't working (it's not the batteries (as I have already checked them and put decent Duracell 1.5V AAA batteries inside it).
I have looked on the web for any information and on youtube without any results for this model.
There are no screws visible or anything obvious. So I am hoping someone here has the solution to take it apart?
The only way I can see is underneath the yellow rubber handle area, however I don't wish to damage it if it isn't the case!... -
Hi,
I own a Fluke 117 multimeter, and suddenly it started displaying "Err EEPr" when turned on. What puzzles me is that the error is not permanent; sometimes it works fine.
Do you know what could be wrong with the multimeter? Any tips on how to try to fix it?
Regards,...
Comment