Got lots of junk, what should I do with it?

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • jpyerry
    replied
    Re: Got lots of junk, what should I do with it?

    I do appreciate the offer, unfortunately I have both of those cards. Actually using the AWE 64 Gold was what kind of started the interest in sound cards. I used to think the sound card doesn't really matter, but one day at a friend's house, we played TIE Fighter with the AWE 64 Gold and I was just amazed at how much better it sounded over the nameless sound card I had in my Packard Bell computer. Now after finding out how much better the Sierra games sound with Roland's cards, I am after an LAPC-I.

    But, yeah, I really do appreciate the offer, but I do already have both of those cards, but thank you very much for looking.

    Yours,
    Justin

    Leave a comment:


  • ratdude747
    replied
    Re: Got lots of junk, what should I do with it?

    Originally posted by ncovert
    I have a Soundblaster AWE 64 Gold and a SB 16.
    Not to hijack your thread, but I also have a SB 16 (or some other SB ISA audio) sitting.

    I used to also have a better one from an HP vectra (MMX 133) with a special jack for a front case audio (headphones and volume slider)... but I'm not sure what I did with those

    Leave a comment:


  • ncovert
    replied
    Re: Got lots of junk, what should I do with it?

    Originally posted by jpyerry
    I am a enthusiast of vintage pcs, if you have anything that is pre 386 era, I would be interested if the shipping is reasonable enough.

    Also, I've been hunting for a couple of specific components, namely: a Guillemot PCI 12MB Voodoo 2 Maxi Gamer 3D2 add-on video card, ATI VGA Wonder ISA video card, SCSI hard drives less than 500MB, Black 1.2MB 5.25" floppy drives, Black AT tower cases, quality AT power supplies, Roland LAPC-I sound card, original Sound Blaster ISA sound cards, original Ad-lib sound cards, really any historically "significant" sound cards (I'm kind of a sound card enthusiast and collect them for curiosity's sake). If you have any of the above listed components, I may be interested in actually purchasing them from you.

    Justin
    I have a Soundblaster AWE 64 Gold and a SB 16.
    Last edited by ncovert; 02-04-2013, 07:13 AM.

    Leave a comment:


  • ncovert
    replied
    Re: Got lots of junk, what should I do with it?

    Originally posted by crtfool
    I asked earlier what you had, and you responded as quoted.
    Oh sorry. I didn't know you meant laptops. I put both laptops and desktops there. I don't have any C2D laptops I would be willing to sell (those are my primary and secondary laptops)

    Leave a comment:


  • jpyerry
    replied
    Re: Got lots of junk, what should I do with it?

    I am a enthusiast of vintage pcs, if you have anything that is pre 386 era, I would be interested if the shipping is reasonable enough.

    Also, I've been hunting for a couple of specific components, namely: a Guillemot PCI 12MB Voodoo 2 Maxi Gamer 3D2 add-on video card, ATI VGA Wonder ISA video card, SCSI hard drives less than 500MB, Black 1.2MB 5.25" floppy drives, Black AT tower cases, quality AT power supplies, Roland LAPC-I sound card, original Sound Blaster ISA sound cards, original Ad-lib sound cards, really any historically "significant" sound cards (I'm kind of a sound card enthusiast and collect them for curiosity's sake). If you have any of the above listed components, I may be interested in actually purchasing them from you.

    Justin

    Leave a comment:


  • crtfool
    replied
    Re: Got lots of junk, what should I do with it?

    Originally posted by crtfool
    I still use Pentium 4 laptops - what do you have?

    Originally posted by ncovert
    Things ranging from 486DX-33's to Core 2 Duo 1.8Ghz's
    I asked earlier what you had, and you responded as quoted.
    Last edited by crtfool; 02-03-2013, 06:36 PM.

    Leave a comment:


  • ncovert
    replied
    Re: Got lots of junk, what should I do with it?

    Originally posted by crtfool
    If you are just going to trash or donate this equipment, then I would be interested in the Core 2 Duo laptops. I will pay reasonable shipping costs.

    Can you list some model numbers, and what state of functionality or missing parts for each?
    What C2D laptops?

    Leave a comment:


  • crtfool
    replied
    Re: Got lots of junk, what should I do with it?

    If you are just going to trash or donate this equipment, then I would be interested in the Core 2 Duo laptops. I will pay reasonable shipping costs.

    Can you list some model numbers, and what state of functionality or missing parts for each?
    Last edited by crtfool; 02-03-2013, 06:17 PM.

    Leave a comment:


  • ncovert
    replied
    Re: Got lots of junk, what should I do with it?

    Originally posted by dmill89
    Just so you are aware in PA it is now illegal to dispose of electronics such as computers in the trash and trash haulers have been instructed not to take such items.
    I knew that. I meant "take it all to the nearest Goodwill computer center which is an hour away from where I live"

    Leave a comment:


  • dmill89
    replied
    Re: Got lots of junk, what should I do with it?

    Originally posted by ncovert
    Trash all of it?
    Just so you are aware in PA it is now illegal to dispose of electronics such as computers in the trash and trash haulers have been instructed not to take such items.

    Harrisburg January 23, 2013 - The Department of Environmental Protection is reminding consumers and businesses that on Thursday, Jan. 24, they will no longer be able to throw away their electronic devices with their trash.

    Passed in 2010, the Pennsylvania Covered Device Recycling Act (CDRA) requires that consumers and businesses not dispose of covered devices, such as computers, laptops, computer monitors, televisions and tablets with their trash. This means that trash haulers will no longer take covered devices unless the municipality has a curbside electronics collection program that ultimately sends the devices to an electronics recyclers.

    "This law is an important step toward further reducing the amount of waste disposed in our landfills," DEP Secretary Mike Krancer said. "There will be a host of positive impacts from this law, such as deriving economic benefits from precious metals found in electronics, eliminating heavy metals in the environment and encouraging environmental stewardship."

    Under CDRA, the covered devices and their components must be properly recycled and may not be taken to, or accepted by, landfills or other solid waste disposal facilities for disposal.

    The law also requires that manufacturers of the covered devices provide for the collection, transportation and recycling of these devices by establishing one-day events, permanent collection programs or mail-back programs for consumers. This is offered to consumers at no cost. Manufacturers must work with an electronics recycler that is properly permitted and certified to handle and process electronic waste.

    Manufacturers must register their covered device brands with DEP and attach brand labels to those devices. Additionally, retailers who sell electronic covered devices may only sell devices with a manufacturer's brand that is registered with DEP.

    Consumerscan also continue to recycle their electronics through a county or municipal electronic recycling program, if one is available. It is recommended that before taking any electronics to collection points or drop-off locations, consumers should first contact that location to see what types of electronics they accept.

    Consumers can learn more about the new electronics recycling law and other important information on recycling in general at the 2013 Recycling Industries Congress on Tuesday, Jan. 22, from 8:30 a.m. to 5 p.m. in the East Wing Rotunda of the State Capitol Building in Harrisburg, Dauphin County.

    This event, which is open to the public and media, will feature exhibits from 30 recyclers and producers of recycled products to showcase how the recycling industry plays a major role in Pennsylvania.

    Secretary Krancer will speak about recycling in Pennsylvania at the news conference from 1 to 1:30 p.m. and will be available for questions after that. The event is sponsored by the Pennsylvania Waste Industries Assoc. and the Pennsylvania Recycling Markets Center.

    Consumers can find more information on registered manufacturers and where to recycle their covered devices at www.dep.state.pa.us, keyword: Electronics Recycling.

    Additional recycling information is available from county recycling coordinators, whose contact information can be found on DEP's website, keyword: recycle, or through the Recycling Hotline at 1-800-346-4242.


    (From the DEP)

    Leave a comment:


  • mariushm
    replied
    Re: Got lots of junk, what should I do with it?

    ebay

    the processors and ram should fetch a few dollars buy it now for 30 days is like.. 50 cents.. or auction is for free...
    the motherboards could also get you a few dollars but may be too much hassle due to big size and postage etc

    Leave a comment:


  • moddolicous
    replied
    Re: Got lots of junk, what should I do with it?

    We're going through a similar situation at my place. Here are the steps that I follow when going through things:
    Do I need it? If yes keep it, if no, go to the next question
    Do I know someone that needs it? If yes, get in contact. If not, go to next question
    Is it worth anything (either eBay, scrap yard, etc). It costs nothing to list it on eBay. If someone pays me $1 for a broken motherboard and pays shipping, then I'm ahead.

    Leave a comment:


  • everell
    replied
    Re: Got lots of junk, what should I do with it?

    This forum has a FOR SALE area. Just post a list of some items....NOT ALL....and state that buyer pays the freight even if item is free. Give it a few weeks for response time (by way of PM). Include the question - are you looking for anything specific. Someone might be looking for a motherboard or power supply and not want to pay freight on entire computer. After that, post another list of items, then another, till all is cleaned up. Anything that doesn't find a new home can then be trashed.

    I test my power supply repairs and experiments using old Socket 370 and socket A pentium 3 class motherboards. Power supplies generally don't care what kind of motherboard they are powering. So I don't consider older mother boards to be trash.

    As for unusual items - I am on the lookout for a Bestec ATX-250 12E for doing some additional experiments. But...I am not willing to pay much for one. This power supply has some unique circuitry. Usually this is considered trash!

    As for my last project, modifying 5vsb on a Antec TruePower330 using a NCP1200 pwm chip, here is a picture of the power supply under test using a Biostar M6VLQ with a pentium 3 cpu. Instead of trashing the motherboard, it is useful!
    Attached Files

    Leave a comment:


  • ncovert
    replied
    Re: Got lots of junk, what should I do with it?

    Originally posted by lti
    Here in Colorado, most of those computers are too new to get rid of. People wait until their computers are at least ten years old before they try to get rid of them, and then they won't sell them for less than $50. People actually buy them.
    Well then my crap would sell like hotcakes if they do that!

    Leave a comment:


  • ncovert
    replied
    Re: Got lots of junk, what should I do with it?

    Originally posted by ratdude747
    Sell the C2D... I still use stuff not as nice as that so in my opinion it ain't junk.

    Anything older than P4 HT is probably junk unless there is something special with it (EATX, AOpen tube sound, etc.)

    If you lived closer I'd have a field day. And a Van for you to borrow.
    Too bad you live like 8 hours away, and too bad I can't drive!
    Edit: Alright, more like 6 hours

    Leave a comment:


  • ratdude747
    replied
    Re: Got lots of junk, what should I do with it?

    Sell the C2D... I still use stuff not as nice as that so in my opinion it ain't junk.

    Anything older than P4 HT is probably junk unless there is something special with it (EATX, AOpen tube sound, etc.)

    If you lived closer I'd have a field day. And a Van for you to borrow.

    Leave a comment:


  • lti
    replied
    Re: Got lots of junk, what should I do with it?

    Here in Colorado, most of those computers are too new to get rid of. People wait until their computers are at least ten years old before they try to get rid of them, and then they won't sell them for less than $50. People actually buy them.

    Leave a comment:


  • Topcat
    replied
    Re: Got lots of junk, what should I do with it?

    http://www.aetv.com/hoarders/

    I'd be buried alive if I didn't get rid of this crap periodically....never accumulated 60 systems though...unless you have a very big place, that has to be floor to ceiling cases and stacks of junk!!

    Borrow a pickup and take it to the recyclers.

    Leave a comment:


  • selldoor
    replied
    Re: Got lots of junk, what should I do with it?

    If you get desperate - And can resist the temptation to collect more
    http://www.freecycle.org/group/US/Pennsylvania

    Leave a comment:


  • ncovert
    replied
    Re: Got lots of junk, what should I do with it?

    Things ranging from 486DX-33's to Core 2 Duo 1.8Ghz's

    Leave a comment:

Related Topics

Collapse

  • shelby5041
    old trs80 computer lots of smoke
    by shelby5041
    hi
    my neighbor gave me an old radio shack trs80 model3 computer...it was stored in his attic for 35yrs...i powered it on and after 5min lots of smoke was coming out of computer...i took it apart and didnt notice any fire evidence so i assume a cap split open...i looked around only saw 1 suspect part...see photo...could this be the smoke?
    07-14-2024, 05:11 PM
  • howardc64
    A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
    by howardc64
    Problem

    This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
    08-04-2024, 10:36 PM
  • evilkitty
    Looking for a solderless breadboard that is not trash
    by evilkitty
    I like to get one on mouser/digikey along with a order i plan to place
    i have 2 breadboards one from ebay w/ horrendous contact resistance (to the point on NC)
    and another from ali-express that feels like i am going to break my micro controller putting it into the thing

    any suggestions? (note that i am not spending $50 on a 3m board)
    04-29-2024, 08:50 AM
  • MasterCap
    AVR-2802 no audio, chip questions
    by MasterCap
    I do some hobby repairs mainly of my own junk, and I don't know much programming level repair/mods.

    I got the AVR-2802 over the weekend, sold as working of course, and it worked for 1 night, using EXT. IN 5.1CH jacks, then after power down, the audio never came back. I've reset it, and get nothing on EXT IN or PHONO, despite having everything set right, hooked up right. I can hear lots of relays work tho.

    I just want it for 5.1CH analog inputs , for PC surround sound. I'm not worried about the video or most of the digital stuff for now.

    So far I've traced...
    01-15-2024, 10:52 PM
  • Dannyx
    UC3842 Power Adapter Blowing Fuse
    by Dannyx
    Good day folks......wow this new layout is weird. It's like I woke up one day and I'm no longer on Planet Earth or something

    Anyway....got this here power brick from a USB to SATA adapter which keeps blowing the fuse after I almost repaired it. The reason I even bother to fix a power brick (wall wart, whatever) in the first place is because this thing was really convenient to use: I'd just plug it and that's it. It's a dual output supply, for both 12v and 5v, which although I COULD easily obtain with a DC-DC converter from a standard 12v adapter, I thought I should crack open the...
    12-05-2023, 12:06 PM
  • Loading...
  • No more items.
Working...