Hello again everyone.
I'm trying to find a replacement cap for a Capxon KF 2200uf 6.3v cap that is/was in a FSP 600w PSU. What makes it so special is that it is 8mm in diameter and where it is sitting in the PSU it needs to have a heatshrink sleeve on it, making it 10mm. Anything larger than that will not fit due to two 45v rectifiers on either side.
The FSP PSU model is FSX600-GLN.
I looked up the specs for the KF series but they don't list an 8x20mm diameter cap for above 1000uf at 6.3v (which kinda leads me to believe it isn't even 2200uf). The closest replacement I found with the size constraints was a Nichicon HM.
I'm thinking the HM will work as the ESR for the 8x20mm Capxon KF (~.15-.20Ohm) seems higher than the Nichicon HM (.16Ohm) but want to make sure I'm thinking this right.
I had tried searching as I saw someone mentioning working on FSP PSUs before with the Capxon issues but wasn't finding anything more than that.
Any help is soooooo appreciated! Thanks!!
I'm trying to find a replacement cap for a Capxon KF 2200uf 6.3v cap that is/was in a FSP 600w PSU. What makes it so special is that it is 8mm in diameter and where it is sitting in the PSU it needs to have a heatshrink sleeve on it, making it 10mm. Anything larger than that will not fit due to two 45v rectifiers on either side.
The FSP PSU model is FSX600-GLN.
I looked up the specs for the KF series but they don't list an 8x20mm diameter cap for above 1000uf at 6.3v (which kinda leads me to believe it isn't even 2200uf). The closest replacement I found with the size constraints was a Nichicon HM.
I'm thinking the HM will work as the ESR for the 8x20mm Capxon KF (~.15-.20Ohm) seems higher than the Nichicon HM (.16Ohm) but want to make sure I'm thinking this right.
I had tried searching as I saw someone mentioning working on FSP PSUs before with the Capxon issues but wasn't finding anything more than that.
Any help is soooooo appreciated! Thanks!!
Comment