Is It Normal for the Capacitors to Get Warm in Operation?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • The_Doctor
    New Member
    • Oct 2008
    • 1

    #1

    Is It Normal for the Capacitors to Get Warm in Operation?

    I've just got two new Intel D865PESO motherboards off of eBay, one is to replace a failed board in a friend's P4-3.2Ghz System, the other one is to replace the motherboard on a p4-2.4Ghz system that originally had onboard video. That computer is being used to run a CNC milling machine, and apparently onboard video oftentimes does not work well with the machines real-time functions. Enough about what I'm doing with them, let's get down to the question.

    I installed the 3.2 GHz Pentium 4 onto one of the boards, along with one gig of memory. I did not install it in a case, it's just laying out exposed and hooked up to a power supply and monitor, just to make sure the CPU and memory actually still work. Well, it boots into Windows no problem whatsoever and shows absolutely no instability, but I accidentally bumped one of the capacitors up near the CPU voltage regulator, and noticed it is quite warm. I then started feeling several of the capacitors near the CPU, they are all quite warm, actually a bit warmer than the CPUs heatsink. You can hold your bare finger on them, but they are warm enough that it is not comfortable. I also noticed that some of the other capacitors, not located near any components that all these we use a lot of power, are at least moderately warm.

    I have never actually checked the temperature of capacitors in a switching power supply, so I don't know for sure, but this does not seem normal to me. I am used to large electrolytics that are simply rectifying 60 Hz AC, and they never seem to get warm at all unless they happen to be located near one of the power tubes. Is it normal for several of the capacitors on a motherboard to get rather warm like I'm seeing, or do I have a motherboard which is basically ready to die right out of the box?


    Thank you
    Ed
  • stevo1210
    Badcaps Legend
    • Oct 2006
    • 4156
    • Australia

    #2
    Re: Is It Normal for the Capacitors to Get Warm in Operation?

    The capacitors that around the CPU tend to get quite warm. So that would be normal and I would not be concerned about it if I were you. If they are getting really hot, I'd be wary as the hotter caps get, the shorter thier life becomes.
    Don't find love, let love find you. That's why its called falling in love, because you don't force yourself to fall, you just fall. - Anonymous

    Comment

    • kc8adu
      Super Moderator
      • Nov 2003
      • 8832
      • U.S.A!

      #3
      Re: Is It Normal for the Capacitors to Get Warm in Operation?

      much of the heat is conducted to the caps from vrm parts and the cpu itself through the board.

      Comment

      • PCBONEZ
        Grumpy Old Fart
        • Aug 2005
        • 10661
        • USA

        #4
        Re: Is It Normal for the Capacitors to Get Warm in Operation?

        As said caps will get warm due to the heat from nearby components.

        Also caps dissipate ripple as heat.
        A cap that's dealing with excessive ripple will be hotter than one that isn't.

        A cap that's failing will also get hot.
        As they go bad the current through them goes up and that creates more heat,,
        which causes more damage -> more current -> more heat in a cycle until it burns open or shorts.

        .
        Mann-Made Global Warming.
        - We should be more concerned about the Intellectual Climate.

        -
        Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.

        - Dr Seuss
        -
        You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
        -

        Comment

        Related Topics

        Collapse

        • survivalbloke
          Dell EC chip warm/hot before power-on - normal?
          by survivalbloke
          This is a shot in the dark, and if you need more info, I'll give it all to you. I've already asked for the schematics and boardview.

          This board won't power up. Has 3.3v on BIOS chip pin 8, 3.3v on power button, confirmed voltage to 0v when pressed power button. The EC chip is quite warm just with the power adapter connected and nothing else. Board is out of the machine and everything disconnected. I'm guess that's abnormal and probably the reason for not powering up. I'm still learning and have been fault tracing with my level of knowledge.

          Just wondering if the EC...
          02-06-2023, 05:20 PM
        • Instafixx
          Macbook A2179 820-01958
          by Instafixx
          Hi,
          Have a Macbook A2179 with liquid damage. Customer showed it some shop which has done an ultrasonic cleaning of the board.
          The board pulls 0V but doesnt turn on. No Fan SPIN. NOT IN DFU.

          I checked the Power Sequences below and found this -


          Once a valid external power source (Charger or battery) is connected, the following rails will come online.
          PPBUS_G3H: Normal voltage is ~12.6v on the charger with the battery disconnected. Produced from the ISL9240 (U7000, which uses PPDCIN_G3H as its VIN.
          PP3v3_G3H_RTC: Normal voltage is ~3.3v. Produced...
          05-20-2023, 05:19 AM
        • slybunda
          AA and AAA battery charger capacitors?
          by slybunda
          hey all, iv got my favourite battery charger here which iv had for many years probably 15 years now or maybe even more. it still works good but thought id open it up to clean the dust out of it, lots of dust inside but now its clean and noticed 4 capacitors inside it and wondered if i should replace them.
          it has inside:
          2 x 47uf 16v caps 105c branded as Su'scon (lol sounds sus to me)
          2 x 470uf 16v LZ105c branded as G.Luxon

          not heard of these brands are they any good?

          iv attached photos of the charger and the board inside for an idea on the type of...
          12-24-2023, 04:41 AM
        • sam_sam_sam
          Panasonic switching power supply daughter board has two 27uf @ 50 volt capacitors which I do not keep in stock
          by sam_sam_sam
          I did not have any 27uf @ 50 volt capacitors but one nice thing is that it has enough room for two capacitors in parallel a 22uf and a 4.7uf @ 50 volts 22 plus 4.7 equals 26.7uf which so very close to 27uf I will show some pictures of it sometime tomorrow

          This is one of the shit est boards I seen in a very long time and it was the daughter board the traces just lifting off the board I had to use the capacitor leads to repair the the traces and the main board is not any better because I had to repair several traces for the daughter board to the main board

          After all of...
          07-13-2024, 08:14 PM
        • amelbye
          degradation of solid state capacitors in motherboards?
          by amelbye
          Hi, I have a question regarding a motherboard with SS capacitors that I'm having trouble with. Every now and again it would give overclock failed at boot even when not overclocking.

          Recently more often, and the last few weeks at every single boot. It seems like the typical capacitors needing to warm up, then everything is fine.

          Weird thing is the capacitors are all solid state. Do SS capacitors degrade the same way as normal caps? Is it worth trying to recap the board?

          I have already replaced the PSU.

          The board is a gigabyte x79 ud3....
          11-06-2022, 10:35 AM
        • Loading...
        • No more items.
        Working...