Re: Very ugly capacitors... or fake? (Panasonic FR)
really? I would figure there would be a greater difference between lytics and polys
really? I would figure there would be a greater difference between lytics and polys
-
Cap Datasheet Depot: http://www.paullinebarger.net/DS/
^If you have datasheets not listed PM me -
Mann-Made Global Warming.
- We should be more concerned about the Intellectual Climate.
-
Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
- Dr Seuss
-
You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
-
Comment
-
Re: Very ugly capacitors... or fake? (Panasonic FR)
I have done it already at some power supplies
Comment
-
Re: Very ugly capacitors... or fake? (Panasonic FR)
Actually there's another good brand w/Low ESR caps but I've never seen them for sale.
Illinois Capacitor...
Their JZM series has ESR/Ripple in between MBZ and MCZ.
Their KXM series has ESR/Ripple comparible to ZL, WX, KZE
They have two series with specs down around the LXY, LZY range too,,,
,,, those are KBM and RZM.
It's possible they are ugly like FR too! Woo Hoo!
Their data sheets are a PITA to read because they don't sort the list by voltage..
.Mann-Made Global Warming.
- We should be more concerned about the Intellectual Climate.
-
Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
- Dr Seuss
-
You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
-
Comment
-
Re: Very ugly capacitors... or fake? (Panasonic FR)
PCBONEZ - you have a tendency to discover treasure often...
I actually emailed NIC Components' Montreal Office to try and source their low ESR stuff, I didn't get an aswer (Typical lazy Frenchmen). I should try to get in touch with Illinois, to see if I can get my hands on their old stock of these series, if they have any that is. (I have a feeling that they probably only did very short production runs of these series).Comment
-
Re: Very ugly capacitors... or fake? (Panasonic FR)
Those are current series, I just never see anyone stocking them.
With all of Japan's problems IC might end up with a bigger chunk of the market and these caps just might start showing up in places.
.Last edited by PCBONEZ; 04-17-2011, 05:43 PM.Mann-Made Global Warming.
- We should be more concerned about the Intellectual Climate.
-
Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
- Dr Seuss
-
You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
-
Comment
-
Re: Very ugly capacitors... or fake? (Panasonic FR)
The factory sales reps [I think] get paid in part on commission so if you aren't placing a large order [or just get lucky and ping one having a slow day] they will just point you to some other company that buys from them in bulk.
.
I hadn't thought about buying old stock direct though.
If they don't have some arrangement with a liquidator that might work.
.Mann-Made Global Warming.
- We should be more concerned about the Intellectual Climate.
-
Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
- Dr Seuss
-
You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
-
Comment
-
Re: Very ugly capacitors... or fake? (Panasonic FR)
I purchased some of those Illinois Capacitors from Farnell once, not Low ESR though."Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
-David VanHornComment
-
Re: Very ugly capacitors... or fake? (Panasonic FR)
The series I mentioned are low ESR.
IC makes good caps, just not many of the low ESR types.
IC caps often show up in better brands of test equipment. [BK, Fluke]
.Mann-Made Global Warming.
- We should be more concerned about the Intellectual Climate.
-
Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
- Dr Seuss
-
You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
-
Comment
-
Re: Very ugly capacitors... or fake? (Panasonic FR)
Yeah I know, I just meant that I bought the general purpose ones, I wasn't looking for Low ESR at the time.
But if Fluke uses them, then I am happy I bought them
"Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
-David VanHornComment
-
Re: Very ugly capacitors... or fake? (Panasonic FR)
LZY is a typo, meant LXZ.Mann-Made Global Warming.
- We should be more concerned about the Intellectual Climate.
-
Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
- Dr Seuss
-
You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
-
Comment
-
Re: Very ugly capacitors... or fake? (Panasonic FR)
Old thread but just wanted to comment on something. First, the IC capacitors are an old brand, they were used a lot in the 70s, AFAIK they got re-issued or they gave them a major bump back into commercial business. They are good and cheap capacitors, im into audio and these caps were used a lot in audio.
Most of you guys are thinking that electrolytics will be extinct because you are only looking at them from the computer motherboard perspective, there are a lot of different industries which require electrloytics, for instance, pro audio.
Pro-audio, specially pro-audio enthusiasts like vintage gear, etc.. Audio is NOT the same without electrolytics, sure, polypropilene caps, or polyester film caps may sound better in some cases, (havent really tried polymer in audio) but in audio is not uncommon to see stuff like 1000uf or 2200uf at 63V low impedance cap, aand i have yet to see a polymer that big.
So in short, dont worry, Low-esr capacitors will still be around...Last edited by Ssound; 08-09-2011, 02:54 AM.Comment
-
I did not have any 27uf @ 50 volt capacitors but one nice thing is that it has enough room for two capacitors in parallel a 22uf and a 4.7uf @ 50 volts 22 plus 4.7 equals 26.7uf which so very close to 27uf I will show some pictures of it sometime tomorrow
This is one of the shit est boards I seen in a very long time and it was the daughter board the traces just lifting off the board I had to use the capacitor leads to repair the the traces and the main board is not any better because I had to repair several traces for the daughter board to the main board
After all of... -
Hi,
I have capacitors like this one in the photo. There are differences between other Elna series, I attach foto of Elna RE3. On this green capacitors series is not specified! Fake?... -
I picked up a Panasonic NH-P70G2, though it would apply to the NH-P80G2, NH-P70G1 and NH-P80G1 models as well, as maybe some other models. This one was coming up with a H86 error. After lots of testing and googling it was an error with one of the thermistors in the condenser area.
The attached French service manuals is incorrect, TH11 is gray and is a 95k thermistor and TH12 is black and is a 35k thermistor.
In my case TH12 was bad. I was able to get a 35k thermistor on AliExpress. It's 6mm in diameter.
Unfortunately the whole machine has to come apart to fix it.
I have... -
Hi, I have some 32 bits computer motherboards that need repair, as they fail to
power on.
Here are some examples :
(N.B. "capacitors" indicated here are electrolytic capacitors located in the onboard
switching supply area).
(N.B. #2 : I could not find a 3300 microF aluminum-polymer with a higher voltage
than 6.3 V.)
1 - Motherboard #1 : this is an Asrock K7VT2 (socket A) that still works well. To put it on test
I replaced capacitors with aluminum-polymer.
3300 microF/6.3 V. x 4 replaced by 3300 microF/6.3 V. (KYOCERA... -
Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing here🤔?
Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting 😂.
TV Model: Panasonic TC-P55ST50
...11-20-2024, 08:52 PM
Comment