Grundig 48 VLX 8582 BP, Possible T-CON issue?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Gjackson
    Senior Member
    • Aug 2021
    • 134
    • Malta

    #21
    Re: Grundig 48 VLX 8582 BP, Possible T-CON issue?

    I'll go ahead and order a new t-con, as nomoresonys said it's not worth the headache of component level, could I buy a t-con with the same model number that came from a different brand TV? as the cheapest I found on ebay came from a panasonic not a grundig.. Thank you all for helping me
    Last edited by Gjackson; 06-18-2022, 02:29 PM.

    Comment

    • Gjackson
      Senior Member
      • Aug 2021
      • 134
      • Malta

      #22
      Re: Grundig 48 VLX 8582 BP, Possible T-CON issue?

      was looking at something like this:

      https://www.ebay.de/itm/265207476678...MAAOSwpHZg1aCI

      Comment

      • nomoresonys
        Badcaps Legend
        • Jan 2013
        • 12075
        • U.S.

        #23
        Re: Grundig 48 VLX 8582 BP, Possible T-CON issue?

        you want to match up the numbers on the white stickers.

        Comment

        • Gjackson
          Senior Member
          • Aug 2021
          • 134
          • Malta

          #24
          Re: Grundig 48 VLX 8582 BP, Possible T-CON issue?

          Closest I was able to find was this after searching eBay and aliexpress:

          pic1 is my board.
          Attached Files

          Comment

          • nomoresonys
            Badcaps Legend
            • Jan 2013
            • 12075
            • U.S.

            #25
            Re: Grundig 48 VLX 8582 BP, Possible T-CON issue?

            some info there on part matching, can also check and see if it's match for your panel number, meaning compatible, not that the panel # and board # will be the same: https://www.shopjimmy.com/finding-the-right-tv-part/
            Last edited by nomoresonys; 06-19-2022, 12:28 AM.

            Comment

            • markolino
              Senior Member
              • Mar 2020
              • 108
              • Slovenia

              #26
              Re: Grundig 48 VLX 8582 BP, Possible T-CON issue?

              Hi..
              News of this tv ???
              You buy a new T-Con ?
              You need exactli same T-Con whit sam model
              Because firmware of tcon of Aliexpress not compatible of your TV

              Comment

              Related Topics

              Collapse

              • x_orange90_x
                TCL 50S535 bad tcon or panel issue?
                by x_orange90_x
                Just bought this for 10 bucks yesterday hoping to fix it. The guy said water dropped inside from a dehumidifier hose and it started showing black and white vertical bars then went blank. When I got it home and turned it on it came on fine and displayed correctly but I was noticing faint vertical bars in the image. After a little bit I turned it off and back on and it was a black screen again. I opened it up to check for water damage and corrosion but didn't find anything of the sort. I cleaned the ribbons anyway and reconnected them but still got a blank screen. If I disconnect the right side...
                03-29-2025, 11:02 PM
              • Chrissygizmo
                Samsung UE55JU6800K half screen dark
                by Chrissygizmo
                Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
                I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
                02-10-2025, 12:33 AM
              • Daren87
                Sony 8K XBR-75Z8H White Screen Vertical Bars Tcon Code. Help Needed🙏
                by Daren87
                Hello everyone,

                I've recently been given a Sony 8k Z8H. It's got a white screen with two vertical black bars. At times it's given me the 5 blink Tcon code. Testing voltage on the Tcon I can see some low or missing voltage. I've done a basic visual check of cables and the COF. Not seeing anything obvious. The original Tcon seemed to have good caps until turning it over. On the bottom I found maybe 10 caps with both sides of the caps shorting to ground. I thought ok these caps and likely other components on the Tcon are shorted so let's try a replacement Tcon. I just received the...
                08-13-2023, 03:25 PM
              • wizard13
                Dynabook Satellite Pro C50D-B-100 - BIOS Issue, Black Screen
                by wizard13
                Hello everyone,

                I am experiencing a BIOS-related issue with my Dynabook Satellite Pro C50D-B-100. When I power on the laptop, the screen stays black, and there is no response from the system. I suspect a corrupted BIOS.

                I have checked the forum and the available documentation but could not find a solution specific to my issue.
                • Brand & Model: Dynabook Satellite Pro C50D-B-100
                • Part Number (P/N): PYU13E-00C00PFR
                • Serial Number (S/N): 22028896H
                • System Configuration (SC): A1PYU13E1127
                • Motherboard Model: IP3_ACN16_MB_V21_20211222A
                • Power Input: DC 19V –
                ...
                02-28-2025, 02:43 AM
              • Ryan.man
                Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                by Ryan.man
                Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                02-04-2025, 12:23 PM
              • Loading...
              • No more items.
              Working...