Sharp 70' LEDs Spike 260v at start up?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Diah
    Badcaps Legend
    • Feb 2013
    • 6344
    • Germany

    #21
    Re: Sharp 70' LEDs Spike 260v at start up?

    who asked you to bring replacement MB ??? yours problem not at it.. send it back and put your original MB.

    other wise please if i tell you on some things i do know... don't ask how it will work.. i am not kidding. it is science too.

    i did explain it several time the spike at start up who cause it and what are the result.. if we don't bring some things in circuit to eat this spike then LEDs will day after day toasted .... i suggest to you this method only because your screen huge. if you take it out 99.9% will damage . go back to your first threat where i explained how to do.

    Comment

    • JayPoorJay
      Senior Member
      • Jan 2022
      • 149
      • United States

      #22
      Re: Sharp 70' LEDs Spike 260v at start up?

      In the first thread you suggested putting a table lamp in series. I'm willing to give it a try - but I need specific instructions/directions. How do I do that?

      Comment

      • vinceroger69
        Badcaps Legend
        • Mar 2012
        • 6714
        • uk

        #23
        Re: Sharp 70' LEDs Spike 260v at start up?

        Originally posted by JayPoorJay
        Hey Man, Hi...

        It's a standard US table lamp,,, I can put whatever size and style bulb in it that you suggest. I'm in the USA,,, so it's 110/120V, around. Having a clear understanding of the wiring is what I mean. And an assurance that this is something that will actually work... Never heard of such a thing.

        What's the reason that putting a filament bulb in series works?
        How does it work?



        On another note - got the MB in the mail, installed it, and it APPEARS to be a dud... No matter how I tried to boot up the TV I was unable to get the screen,,, light or dark,,, to display anything that would allow me to reset the TV, see the menus, or start it up in the special K screen where the "Industry Init" option is displayed,,,, well, anyways. The power light on the front of the TV came on and stayed on nicely. Just NO kinda image what so ever. Replaced the OLD board and things went back to "normal". A normal broken tv, lol.

        Any suggestions, new main board initial setup? I'm all ears. Or, I'll return it tomorrow or Friday AM.

        Again. That's to you all. I really really y'all sharing your hard worked for wisdom, knowledge and experience.

        Peace
        i would return that non working board and get a full refund and try the lamp method suggested removing a 70in lcd is your last option in my opinion as very high risk of cracking it etc.

        Comment

        • JayPoorJay
          Senior Member
          • Jan 2022
          • 149
          • United States

          #24
          Re: Sharp 70' LEDs Spike 260v at start up?

          So, with a better method of communication, Diah and I worked thru the lamp method. No good result. Tried all three channels/groupings of LED leads, working on the MINUS side placing a lamp with 60watt and 35watt bulb, in series.

          TVs indicator would blink on initial plug in, then when force started would try and power up (LEDs lighting) then powering down. Shining a light on the screen an image could be seen.

          I am willing, and it seems the only option is to open the TV, remove the screen (risky) and try to match the LED strips. Test them. Then determine whether to source NEW complete strips is the best option, or to replace individual LEDs on the OE strips. I like the second option. As I understand it, complete strips for the TV have always been unobtain-ium... Then, do I get 100 new individual leads and work the daunting task of replacing the ALL, or just the few that have gone south.

          At a crossroads.

          Comment

          • Diah
            Badcaps Legend
            • Feb 2013
            • 6344
            • Germany

            #25
            Re: Sharp 70' LEDs Spike 260v at start up?

            Originally posted by JayPoorJay
            So,
            there are somethings wrong.. can you show me the powerboards lable you installed.. and the original one. there are 2 version of PCB one for 60 size and other for 70 .. both identical but the BL spike are different

            Comment

            • JayPoorJay
              Senior Member
              • Jan 2022
              • 149
              • United States

              #26
              Re: Sharp 70' LEDs Spike 260v at start up?

              I'm at work now, but will when I get home. I was pretty careful about comparing and checking the p/n's,,,, but anything is possible. Thanks!

              Comment

              • JayPoorJay
                Senior Member
                • Jan 2022
                • 149
                • United States

                #27
                Re: Sharp 70' LEDs Spike 260v at start up?

                Hello again y'all.

                I traveled for a few days so have been away from the monster...

                To Diah... I have the MB with it's brackets all back on the TV and to get photos of the OE board part numbers I would have to disassemble again. Now, tonight, I just don't have the energy for that. Worked all day and weekend.

                Q: Is there anyway to KNOW which individual/single LEDs would be the correct replacements BEFORE taking the screen off the TV? I communicated with Shop Jimmy and they said complete sets were never made.

                I ask because I would absolutely prefer to have the screen off the chassis for as short a time as possible. I would like to repair (if I can even do this) and replace the LEDs and replace the screen in one shot, if you know what I mean...? I don't want to have to wait a week between having the screen off and laying around while I wait for the replacement parts.

                Neeeerve wracking, this thing is.

                Comment

                • JayPoorJay
                  Senior Member
                  • Jan 2022
                  • 149
                  • United States

                  #28
                  Re: Sharp 70' LEDs Spike 260v at start up?

                  Here is the info off the 2 boards.
                  They're identical, unless I'm missing something.
                  Attached Files

                  Comment

                  • nomoresonys
                    Badcaps Legend
                    • Jan 2013
                    • 12085
                    • U.S.

                    #29
                    Re: Sharp 70' LEDs Spike 260v at start up?

                    That info does not tell the whole story, you pretty much MUST go by the info on the white sticker, that printed board info is what they start with, then they populate acording to need.

                    Comment

                    • nomoresonys
                      Badcaps Legend
                      • Jan 2013
                      • 12085
                      • U.S.

                      #30
                      Re: Sharp 70' LEDs Spike 260v at start up?

                      Might very well have a mismatch.

                      Comment

                      • nomoresonys
                        Badcaps Legend
                        • Jan 2013
                        • 12085
                        • U.S.

                        #31
                        Re: Sharp 70' LEDs Spike 260v at start up?

                        https://www.youtube.com/watch?v=izaPfMU6hHE

                        Comment

                        • JayPoorJay
                          Senior Member
                          • Jan 2022
                          • 149
                          • United States

                          #32
                          Re: Sharp 70' LEDs Spike 260v at start up?

                          Good Morning... I watched the vid and had another look. No completion type bar code style sticker like in the Samsung. All I saw were these. I'll post what I did see. I'll have a close look after work.

                          Also, I reached out to the guy from the eBay link above and he feels fairly confident that his strip will match mine. When I suggested the plan of using his strips and SAVAGING the remaining LEDs I would need and soldering them into the remaining board (if need be), he said his own success rates doing this are 50/50...? $75 bucks a pop for the strips and I haven't seen anymore anywhere.
                          Attached Files

                          Comment

                          • nomoresonys
                            Badcaps Legend
                            • Jan 2013
                            • 12085
                            • U.S.

                            #33
                            Re: Sharp 70' LEDs Spike 260v at start up?

                            If your edge lit leds are tiny like this sony I'm currently messing with, I'd say getting whole strips is best plan, maybe see what the backlight pros here say but I'd go whole strips.

                            Comment

                            • JayPoorJay
                              Senior Member
                              • Jan 2022
                              • 149
                              • United States

                              #34
                              Re: Sharp 70' LEDs Spike 260v at start up?

                              Hey, NoMore... All the pictures I've seen, and there ain't a lot, are larger rectangular style with like 4 clear solder joints at corners... The guy has 2 strips that are advertised as being 100%. But who knows...

                              If I were to purchase it would bring me to $200+ in. Still not too too bad. But still I am hesitating. Then, finer solder, flux in a needle, better iron and a hot plate of some kind are on the shopping list - suction cups X4, and FEAR of breaking the damn thing anyways. Fun fun.

                              Comment

                              • nomoresonys
                                Badcaps Legend
                                • Jan 2013
                                • 12085
                                • U.S.

                                #35
                                Re: Sharp 70' LEDs Spike 260v at start up?

                                I see, well in that case, using new leds would be better than used, go for the singles then if it's bad backlight/s.

                                Comment

                                • nomoresonys
                                  Badcaps Legend
                                  • Jan 2013
                                  • 12085
                                  • U.S.

                                  #36
                                  Re: Sharp 70' LEDs Spike 260v at start up?

                                  .

                                  Comment

                                  • nomoresonys
                                    Badcaps Legend
                                    • Jan 2013
                                    • 12085
                                    • U.S.

                                    #37
                                    Re: Sharp 70' LEDs Spike 260v at start up?

                                    The harbor freight suction cups should be fine, no need for the fancy overpriced ones.

                                    Comment

                                    • JayPoorJay
                                      Senior Member
                                      • Jan 2022
                                      • 149
                                      • United States

                                      #38
                                      Re: Sharp 70' LEDs Spike 260v at start up?

                                      Originally posted by nomoresonys
                                      The harbor freight suction cups should be fine, no need for the fancy overpriced ones.
                                      Yup. Thanks

                                      Comment

                                      • Diah
                                        Badcaps Legend
                                        • Feb 2013
                                        • 6344
                                        • Germany

                                        #39
                                        Re: Sharp 70' LEDs Spike 260v at start up?

                                        70 size PCB should labeled some where with KB131W the small size KB119W

                                        the early strings i think they used almost double LED 6,v 7030 100 pieces less than 6$ 200 pieces enough to replace all. only need the iron tips 0.1mm and solder wire thickness less than 0.5mm to have clean work. plus consider if you like it or not, you will burn nail or finger. LOL

                                        Comment

                                        • vinceroger69
                                          Badcaps Legend
                                          • Mar 2012
                                          • 6714
                                          • uk

                                          #40
                                          Re: Sharp 70' LEDs Spike 260v at start up?

                                          https://www.aliexpress.com/item/32445357361.html
                                          something like this may work but what what and colour type im not sure plus you need too check anode and cathode matches your leds used

                                          Comment

                                          Related Topics

                                          Collapse

                                          • Pipolups
                                            Corsair K70 LUX RGB dying LEDs
                                            by Pipolups
                                            Hi there !

                                            I'm having an issue for several weeks with my quite old K70 LUX RGB keyboard. I haven't used it for few months, and once I setup up again my desktop computer, I got several dead LEDs on that keyboard. I tried the Corsair troubleshooting thing (disabling options in iCUE, ...) but nothing changed so I conclude that for some reason some LEDs went in retirement...😅
                                            Decision taken to change these LEDs as I have access to desoldering iron and binocular magnifier, I wrote a ticket to tech support, hopping to obtain the LEDs reference and... They refused to tell me 🙄...
                                            10-08-2024, 11:58 AM
                                          • Easky15
                                            Sharp LC-39LD145K No Power to LEDs
                                            by Easky15
                                            Hi all, Been a while since ive had to use this forum,
                                            I have here a Sharp LC-39LD145K that works fine apart from no power to the backlight LEDs, I have stripped it right down and tested all LEDs and they all work fine, I can see them flash briefly for a split second when powered up, the voltage to them slowly drops away after the flash so im guessing there is an issue with the power board,

                                            I think the model number on that is 17IPS20 and here is some pics of it

                                            Any help on this would be greatly appreciated,

                                            Thanks...
                                            05-10-2020, 07:11 AM
                                          • Mustang67ford
                                            Sharp LC-50LB370U PS or backlights?
                                            by Mustang67ford
                                            Hello all. Working on a sharp LC-50LB370U. A few days ago, I turned the tv on and immediately left the room, came back in and tv was black. Turned it off then on and all good (didnt think much of it at the time) for about a week. Did the same thing again but stayed black this time. When turning on, the word "sharp" is dimmer than normal I think then tv goes black. I do have sound and do have a display with the flashlight test. I trided unplugging and also holding in the power button for 30 sec, no change. I opened the back up and the backlights do turn on to some extent for a moment...
                                            11-12-2022, 08:32 AM
                                          • THE GTC
                                            Insignia NS-37D20SNA14 intermittent LEDs
                                            by THE GTC
                                            So I use this TV daily as a second monitor for my PC or my Playstation - at one point a few months back I tried to fix the problem - but in the process, I figured out something that works so I haven't posted this for awhile. It is an annoying trick to have to do though, so I decided to post about it to see if anyone could spot what's wrong. It baffles me because it works on it's own half the time.

                                            When I first got this TV, I was told it wouldn't turn on, and of course I did the flashlight test, and the image was there. Also, the red LED on the front indicated that it had power (it...
                                            11-03-2020, 02:40 AM
                                          • advant
                                            Driving a Sharp TCON/panel with a universal main board
                                            by advant
                                            This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

                                            I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
                                            02-03-2020, 12:25 AM
                                          • Loading...
                                          • No more items.
                                          Working...