I have a 65" rca tv, built july 2020, after about 10 minutes the horizontal lines start running down from the top toward the bottom and the picture will soon freeze. If I unplug it and plug it back in again everything will work again for about 10 minutes and then the lines start running. I even opened the back of the tv and when the problem strikes I disconnect the wire harness from the main board to the T-Con board and then reconnect everything goes back to normal for about another 10 minutes. Would the T-Con module cause this problem? I don't think the main board would cause it.
I need any help I can get from the TV experts on this forum.
On top of all that it's almost impossible to get parts for RCA Tv's.
I need any help I can get from the TV experts on this forum.
On top of all that it's almost impossible to get parts for RCA Tv's.
Comment