Samsung UN65KU6300FXZA no picture
Collapse
X
-
-
Re: Samsung UN65KU6300FXZA no picture
i did see on SHOPJIMMY.COM they were sell a kit for the main board but are sold out and also selling EEPROM's, not sure if that is the problem with mine but i guess it's worth a try.Comment
-
Re: Samsung UN65KU6300FXZA no picture
I look at the main board pictures, but it is not clear enough for me to read those small prints on the board when I zoom in.
At this point the problem looks to be in the T-CON section of the main board, may be it is not getting the T-CON switched 12V for the T-CON section to run, bad components.
Since we do not have the schematic for the main board, all you can do is visual inspection, get the spec sheet of the IC's so we can do Voltage testing on the IC's, resistance testing.
I do not know how much times and efforts you will want to put into this board to troubleshoot down to component level.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: Samsung UN65KU6300FXZA no picture
Not having any luck finding data sheets or schematics. The EEPROM Shopjimmy is selling is in location IC1104 and the ebay site says "The T-CON is built into this board". So i am guessing that this eeprom is part of the T-Con circuitry? Just wish i could test it to see if it is indeed bad.
https://www.ebay.com/itm/Samsung-BN9...-/274409445796Comment
-
Re: Samsung UN65KU6300FXZA no picture
https://www.badcaps.net/forum/attach...7&d=1597435827
That IC (with 3 inductors with 100 marking on top surrounding it) looks to be for T-CON LCD bias power supplies.
Can you read the P/N printed on top of the IC.
The main board you have has integrated T-CON circuits.Last edited by budm; 08-14-2020, 08:28 PM.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Comment
-
Re: Samsung UN65KU6300FXZA no picture
I wonder why SJ does not describe what bad symptom of the TV this EEPROM will fix.
I wonder if unplug TV from outlet, cool the EEPROM with freeze spray then power up the TV trick will work.Last edited by budm; 08-14-2020, 08:44 PM.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: Samsung UN65KU6300FXZA no picture
I know SJ used to describe the issue it solved but not doing it anymore? i can try to pick up a can of freeze spray tomorrow, do you happen to remember the name of the spray by chance?Comment
-
Re: Samsung UN65KU6300FXZA no picture
I use canned air duster (DustOff from COSTCO) upside down to get the coolant for cooling, any office supply should have similar products.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: Samsung UN65KU6300FXZA no picture
let us do more test on the main boards
1-put every things in place except the wifi socket keep it out ( to reduce load). don't forget the chassis screw of MB.
2- play HDMI signal on the set at the HDMI socket which remarked with ARC then turn on the set.. let see what will happen...
the purpose of this all... to let the set synced with other source in case the RF section had issue and it share same the 12V range with T-CON circuitComment
-
Comment
Related Topics
Collapse
-
by sordids999Hi
Really stuck on this TV
I'm thinking it's a bad screen ?
Voltages all seems good
Tcon 12v ok
Remove one tcon cable at a time no half image on the screen just backlight and no picture
even tried the tape trick still no luck
Thanks... -
This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...09-07-2024, 05:50 AM
-
by TR103Hi, I have a Samsung UE50TU with:
- sound and backlight, but no picture
- when it arrived, it had a picture for a few seconds
- it keeps rebooting
- without ribbon cable between the two panel boards, it does not reboot but I have no picture
- without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
- when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.
- without cable between mainboard and lcd panel and with a jumpered... -
by stingerWhen I turn tv on, the backlights come on but there is no sound or picture. I have read that these tv's have problems with the panels going bad but the "no sound" has me questioning if the main board is bad. Is there a way to troubleshoot the main board to determine if that is the problem?
-
by JJAAMMThis was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.
Problem
TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode... - Loading...
- No more items.
Comment