Bauhn ATVS58 Mainboard issue

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • nomoresonys
    replied
    Re: Bauhn ATVS58 Mainboard issue

    Have him send a pic. of both boards side by side so he isn't just sending a pic of your board back.

    Leave a comment:


  • RooTV
    replied
    Re: Bauhn ATVS58 Mainboard issue

    I dont have the tv anymore so I cant even test it. a bit frustrating.

    I have asked him for a photo of his board so I can see if he even ordered the right part.

    Not much more I can do I guess

    Leave a comment:


  • dick_barton
    replied
    Re: Bauhn ATVS58 Mainboard issue

    All you can do is to put it down to experience. Have the board returned and check it for damage before refunding any monies.

    Leave a comment:


  • RooTV
    replied
    Re: Bauhn ATVS58 Mainboard issue

    I guess Im mainly concerned about him misdiagnosing his issue and when the new board didnt fix the problem, wanting a refund when its not my issue.

    He says that when he puts my board in he has no power.

    That could mean anything I know, but how do I reconcile that?

    Leave a comment:


  • petehall347
    replied
    Re: Bauhn ATVS58 Mainboard issue

    i used to mark the boards when i was selling them . if anyone said they wanted to return i would say send it back so i can check the security marks then issue a refund . nothing ever came back .

    Leave a comment:


  • nomoresonys
    replied
    Re: Bauhn ATVS58 Mainboard issue

    I saw when they had all the delivery companies and the usps on hidden camera, just kicking and slamming packages, to take out their frustrations or just because they are assholes? who knows BUT after that I always get them insured. NEVER get the usps insurance it's a joke.
    Last edited by nomoresonys; 07-20-2020, 04:06 PM.

    Leave a comment:


  • nomoresonys
    replied
    Re: Bauhn ATVS58 Mainboard issue

    Could be any number of problems, he may have a different issue than mainboard, might have also been damaged in shipping, best is to spring for a couple bux and get the insurance, it covers the whole cost, I seldom sell but I do get insurance and spring for the signed signature for delivery.

    Leave a comment:


  • diif
    replied
    Re: Bauhn ATVS58 Mainboard issue

    You are responsible for return costs too.

    Leave a comment:


  • RooTV
    replied
    Re: Bauhn ATVS58 Mainboard issue

    If I decide to give him a refund for the mainboard, whats the normal procedure?

    He pays to send it back to me and I reimburse him the original purchase price + original amount paid for postage?

    Or am I responsible for paying to have the board sent back to me as well?

    Leave a comment:


  • dick_barton
    replied
    Re: Bauhn ATVS58 Mainboard issue

    I don't sell anymore but when I did I also used tamper proof stickers on parts sent out and it did ensure that returns were my originals.

    Leave a comment:


  • diif
    replied
    Re: Bauhn ATVS58 Mainboard issue

    No anti static bag just bubble wrap?
    I put security stickers on the boards I sell, they are viable in the listing and so hopefully deter those hoping to commit fraud.

    Leave a comment:


  • nomoresonys
    replied
    Re: Bauhn ATVS58 Mainboard issue

    You could get something like this BUT like they say the buyer is never wrong on ebay, but it would let you know that they pulled the ole' switcheroo on you and you will know better than to do any more business with that buyer at least til they change their ebay I.D: https://www.ebay.com/itm/2-in-1-Lumi...UAAOSwzcJdCh13

    Leave a comment:


  • dick_barton
    replied
    Re: Bauhn ATVS58 Mainboard issue

    Unfortunately that's one of the problems with selling parts. You can ask for a photo of his board and yours. I've had people buy for a model eg LG43LH5100 when in fact the set is an LG43LH5100-ZE which has a completly differnet mainboard.
    Or...it hasn't cured the fault so wishes to return it by claiming it doesn't work.

    I guess you'll never know for sure.

    Leave a comment:


  • RooTV
    started a topic Bauhn ATVS58 Mainboard issue

    Bauhn ATVS58 Mainboard issue

    I had a Bauhn ATVS58 that was working except a cracked screen so I parted it out.

    I sold the mainboard on ebay and now the guy is emailing me saying that it doesnt work?

    It was working when I pulled the tv apart, so I am wondering...

    He says the original board is "going in a loop" and when he puts my board in there is no power?

    Why would there be no power from my mainboard and why is his in a loop?

    Im a bit wary as there is little stopping people from buying my boards, saying they dont work and sending me back their originally bad board for a full refund.

    From what i remember and see on the photo of it, any serial number or mac address etc is only on a sticker on the board, so if they swap them over I dont know what I can do to prove it isnt the one I sent, if thats what happens.

    Not sure what to do apart from asking him if the box looked damaged when he got it. I know I wrapped it pretty well in bubble wrap etc.

Related Topics

Collapse

  • Soulzink
    Samsug washing machine. Power supply DC41-00189a board issue
    by Soulzink
    Hi everyone,

    I am trying to fix a samsung washinmachine power supply main board.
    I already replaced it with another one to fix the machine but i want to try understand the issue with the old board.
    Therefore i hope to be able to get some help to explain what to check in order to troubleshoot.
    The power supply board reference is the following: DC41-00189a
    I have followed one thread (https://www.badcaps.net/forum/troubl...ingmachine-rel...
    04-19-2025, 06:26 AM
  • Asraf Atb
    Help Needed: Samsung UE55MU8000 Dead - Possible Main Board Issue
    by Asraf Atb
    Hi everyone,

    Im looking for some advice regarding my Samsung UE55MU8000 TV with main board model BN94-11606C. The TV suddenly stopped turning on and now shows no signs of life at all not even the standby light at the bottom.

    Initially, I suspected an issue with the PSU, so I took it to a repair center. They tested it and confirmed that the PSU works perfectly, even on other TVs. Based on that, I started investigating the main board.

    I disconnected the main board from the PSU, and the backlight turned on, which seems to confirm the main board is the issue....
    01-27-2025, 05:02 PM
  • Stephen
    A2991 Logic Board issue, 20volts 0 amps help!
    by Stephen
    Customer plugged in samsung monitor into the board and used it as a power supply, killed UG800 and UG400. I replaced those two with an exact donor board we had In stock and working, board pulls 5volts and then gets like 2.89 amps on the left side. The singular port is the port that failed. Used a perfectly working chips from donor (board was locked) Now I only get 5volts 0 amps on that power and then 20volts 0 amps on the two left side ports, I checked for DFU and nope nothing, computer not turning on. No shorts present anymore. I am confused as I used the exact components from an identical...
    09-10-2025, 03:16 PM
  • Stephen
    A2991 logic board issue, 20volts 0 amps help!
    by Stephen
    Customer plugged in samsung monitor into the board and used it as a power supply, killed UG800 and UG400. I replaced those two with an exact donor board we had In stock and working, board pulls 5volts and then gets like 2.89 amps on the left side. The singular port is the port that failed. Used a perfectly working chips from donor (board was locked) Now I only get 5volts 0 amps on that power and then 20volts 0 amps on the two left side ports, I checked for DFU and nope nothing, computer not turning on. No shorts present anymore. I am confused as I used the exact components from an identical...
    09-10-2025, 03:15 PM
  • notallbad
    TCL 55RP620K power board issue
    by notallbad
    Originally the tv arrived with dimmed backlights (not failed leds) but everything else worked ok. Adjusting backlight in menu did nothing but voltage changed on dimming control pins,
    0% p_dim at 1.65v and a_dim at 1v
    50% p_dim at 3.3v and a_dim at 1.65v
    100% p_dim at 3.3v and a_dim at 2.88v

    Changed backlight leds anyway as always like to have complete peace of mind they wont fail shortly after selling the tv. No change as expected!

    Leds are 2 rows of 15 6v leds.

    On inspection of the power board found diode MBR3200 shorted so replaced with...
    07-12-2025, 05:45 AM
  • Loading...
  • No more items.
Working...