TCL 55S401 LED LCD TV no backlight
Collapse
X
-
Re: TCL 55S401 LED LCD TV no backlight
yes but thats what our gov wants here in the usa and many other countries..they want people to spend more money so they get more tax money...but gigantic issue almost noone talks about is where does all of this toxic junk go when its tossed out???..the common person think it magically just disappears ..our gov knows where it goes but they dont care because it wont affect them but it will affect future generatsion but like i said they dont care all they care about is tax dollars and making stuff that lasts for many years is not good for our gov pocketbook..and thats a fact....Comment
-
Re: TCL 55S401 LED LCD TV no backlight
beau i have all voltages at the ps connector including BL on voltageComment
-
Re: TCL 55S401 LED LCD TV no backlight
one of my hobbies is I go down to our local dump where they have a bin for all electronic disposal, I root around and find units to repair or steal parts off of. I have supplied my brothers, my fathers, and my house all with 50 inch plus tvs that i have repaired. I think so far the most i have in one tv is about 50 bucks. Ill try and fix anything i can find!! its fun for me. I also fix stuff up and sell it for just what i have in parts to people that need things that cant afford new stuff.Last edited by Beau28713; 11-08-2019, 08:00 AM.Comment
-
Comment
-
Re: TCL 55S401 LED LCD TV no backlight
hi beau..thats awesome..saving landfill is what everyone should do..but todays society just dont care...i basically will not fix a tv if it costs more than about $25...since they have little to no value anymore....if i cant fix for 25 or less i just tear it apart and sell the parts to someone who wants to fix their tv...i cant see spending more than 25 when the tv is only worth $50 fixed lol..out here where i live used lcd tvs sell for $50 or lessLast edited by shelby5041; 11-08-2019, 08:08 AM.Comment
-
Re: TCL 55S401 LED LCD TV no backlight
what voltage value should i have at BL=dim? i can check later..but i beleive i had all voltages at the pins on the ps connectorComment
-
Re: TCL 55S401 LED LCD TV no backlight
I normally limit myself to $50 or ill find a buyer first and ask them if it is fixable how much would they be willing to spend on the repair. I never charge labor fees only parts. I sold one 50 inch plasma to a lady for .50 cents. lol. she was so happy she hugged me for like 10 mins. lol
I try to give back to the world as much as i can. MY day job is a Electronic engineering Tech. We mainly work on government contracts aircraft electronics.Last edited by Beau28713; 11-08-2019, 08:15 AM.Comment
-
Re: TCL 55S401 LED LCD TV no backlight
So do you have 380 ~ 400VDC or not? The backlights circuit needs that PFC Boosted Voltage to work.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: TCL 55S401 LED LCD TV no backlight
hi sorry not able to do any further testing....we got tons of snow and tv is in garage can not get to it....like i said the tv powers on fine with sound and picture but no backlight voltage at all 0V....i have all voltages coming out from the power supply to main board...Comment
-
-
Re: TCL 55S401 LED LCD TV no backlight
and ...i did buy a used power supply and same exact results....so that would tell me backlights are bad and that indeed this tv model does not output voltage from ps to backlights unless connected and good...would that be correct?Comment
-
Re: TCL 55S401 LED LCD TV no backlight
yes as it would be extremely rare to have 2 power supplies with exact same issue so i have to assume on this particular tv..the standard check for voltages is null and void to rule out the power supply ...and the fact that when there is a LED backlight issue its 95% of the time bad backlights and not bad PS even more points to my issue being bad LEDSLast edited by shelby5041; 11-13-2019, 06:13 PM.Comment
-
Re: TCL 55S401 LED LCD TV no backlight
Bad backlights you still should have Voltage at the LED connector BEFORE it goes into shutdown if it detects bad backlights, and we still do not know if you even have Dimming control signal or not beside the PFC Voltage.
Also try this test: TV is OFF then keep the DC meter probes on L2+ and L2- then turn on the TV to see if the Voltage even jumps to over 100VDC or not, repeat the same test on L3+ and L3-.
you can also spend about $30 for LED tester.Last edited by budm; 11-13-2019, 09:45 PM.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
Related Topics
Collapse
-
by CornitoHello Team,
I'm back with another backlight issue that I thought was simple, but it turned out to be more complex than expected.
Let me provide a brief history: The TV was working well, then one day, the backlight started and shut down. I thought I had an LED issue leading to this behavior, so I replaced the LEDs with brand new ones. However, the issue remains the same.
Next, I replaced the electrolytic capacitors attached to the LED power supply, but the results were the same. I then replaced the driver, a OB3365RP, and did it twice due to the same result.... -
by CornitoHello team,
I'm back with another topic.
It's a 65C715 TCL tv with backlight issue.
But the problem is a bit strange.
When I took this tv from the marketplace backlight didn't work but picture was ok.
Back at home I checked with led tester if led are alive and I can find something different in term of voltage supply => nothing
Putting all back together the tv worked fine for weeks. => Contact issue??
Few moment later the tv has started to have backlight issue back, turning off and on worked sometimes and tv was working.... -
by fuzzyrunnerHello All!
So here is the issue I am having. When everything is plugged in as normal, the TV turns on and I get a quick flash of the backlight. After that the backlight never turns back on but the rest of the TV works fine. If I pull the PWM pin from the cable between the main board and power board the backlight turns on and the tv works "normally". If it is plugged in I get nothing. I did do a factory reset but that didn't solve my issue. When everything is plugged in normally I get .6v at start up and continues rise over about 10 seconds. (~.6v then ~.8v then ~1.8v... -
by FrancescoVGood morning everyone,
I'm trying to repair an onkyo ht-r390 that has no sound output, despite the volume being at maximum, the rest seems to work; the video output signal (coming from an hdmi input) is present, but the audio is absent. Similar situation if I send an audio signal from any input I have no output.
The firmware reported is the following:
M:1.00/11107BLP
D:?.??/????????
O:1.00/11107AL
The DSP firmware given the question marks seems corrupt.
On the BCHDM-0678 - 25140678 - QPWBCHDM0678A0 board the chip that usually seems...-
Channel: Troubleshooting Audio Equipment
05-11-2025, 02:59 AM -
-
by roman728Hello friends,
I have this unit with no backlight on screen. After inspection i determined there is a shorted capacitor on BKL_BOOST circuit. I removed the capacitor, short is gone but backlight still not working. I found that Q9702 is not open and R9721 is only around 70kOhms but according to schematics it should be 301k. I removed the resistor and connected the gate of Q9702 directly to GND. Now i have 12v passing by the mosfet to turn on backlight IC LP8561 (U9700) but BKL_BOOST circuit is not working. I can measure only 12V there but it should be around 60V.
Can you... - Loading...
- No more items.
Comment