Re: EVGA GTX 1080 TI Issues
I'll give it a go, since I'm not having any luck finding reputable supplier for the chip yet....
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: EVGA GTX 1080 TI Issues
Ran MATS on the GPU,* It came back as a failed memory chip at Bank C1. I have removed the chip and I'm now in search of a new one. (part Number D9VRL) It's a Micron BGA 1Gb Nand Flash Memory. Will update after I find replacement part.* *...
Leave a comment:
-
Re: EVGA GTX 1080 TI Issues
Okay Thank you, Ill rig up a test fixture for cooling the GPU and hook my scope up and read the mem I/O's.
I'll also hit the other suggestions. Thanks again...
Leave a comment:
-
EVGA GTX 1080 TI Issues
My test Rig
:GA-Z170X-Gaming 7 (rev. 1.0) : 2016
:Intel Pentium 4 Processor (G4560T) : 2017
:EVGA GTX 1080 TI : 2017
:16 Gigs 2400 Ram
:750W 80+ Bronze Power supply
:BIOS version F22
GPU voltages
:PCIe 12v (12.2v)
:PCIe 3.3v (3.32)
:Main 12v (12.2v)
:5V (5.01v)
:1.8v (1.79v)
:Mem 1.3v (1.299)
:1v (.998v)
:vCore (.800v)
My Issues I'm having
With the GPU installed in a PCIe x16 (3.0) and connected to the power
supply the GPU has initial fan...
-
Re: LG 50PN4500 - fluctuating Vcc/18V supply on Y-sustain board causing fault
I do believe R_J is correct in saying they are .022uF and around 500v. The safest way to proceed would to just buy the repair kit. That way you will have the correct caps and plus you will have some spare parts in case you need them.
Leave a comment:
-
Re: TCL 55S401 LED LCD TV no backlight
Curious as to what you have found out?
Leave a comment:
-
-
Re: TCL 55S401 LED LCD TV no backlight
That would be a good assumption.
Leave a comment:
-
Re: PSU from iMac 2007/2008 614-0420 Delta
Is it getting through the POST(Power on self test) and then shutting down when the OS(operating system) starts to boot up? or
IS it not fully getting through the POST before it shuts down?
Leave a comment:
-
Re: TCL 55S401 LED LCD TV no backlight
Any update on the voltage budm was asking about? Did you get it repaired?
Leave a comment:
-
Re: TCL 55S401 LED LCD TV no backlight
If i remember correctly the BL_dim should vary from low DC voltage close to zero bl off up to maybe 4VDC BL full on.
Leave a comment:
-
Re: TCL 55S401 LED LCD TV no backlight
I normally limit myself to $50 or ill find a buyer first and ask them if it is fixable how much would they be willing to spend on the repair. I never charge labor fees only parts. I sold one 50 inch plasma to a lady for .50 cents. lol. she was so happy she hugged me for like 10 mins. lol
I try to give back to the world as much as i can. MY day job is a Electronic engineering Tech. We mainly work on government contracts aircraft electronics.Last edited by Beau28713; 11-08-2019, 08:15 AM.
Leave a comment:
-
Re: TCL 55S401 LED LCD TV no backlight
In my experiences The bl_dim has to be there also, if its not the power supply thinks the back lights needs to be off....
Leave a comment:
-
Re: TCL 55S401 LED LCD TV no backlight
one of my hobbies is I go down to our local dump where they have a bin for all electronic disposal, I root around and find units to repair or steal parts off of. I have supplied my brothers, my fathers, and my house all with 50 inch plus tvs that i have repaired. I think so far the most i have in one tv is about 50 bucks. Ill try and fix anything i can find!! its fun for me. I also fix stuff up and sell it for just what i have in parts to people that need things that cant afford new stuff.Last edited by Beau28713; 11-08-2019, 08:00 AM.
Leave a comment:
-
Re: TCL 55S401 LED LCD TV no backlight
I agree 100% on bring back the old school CRT. They dont make them like they used to. Its more of a throw away and buy a new one world now....
Leave a comment:
-
Re: TCL 55S401 LED LCD TV no backlight
what iv don in the past If you want to test the back lights circuit without any led strips connected is disconnect power supply cables from all other boards. Then either bring power supply on pin low or high depending on the circuit, check to see if you have all you dc voltage outputs EX 12, 5 24 depending on power supply. Then bring your Bl_on high by inserting 3vDC into the circuit and then you must bring your BL_dim circuit High with about 3VDC and that should activate the BL-On circuit and you should have a voltage across your pins on the...
Leave a comment:
-
Re: TCL 55S401 LED LCD TV no backlight
Correct me if im wrong but in his original post he states that the TV powers on and he as an image on the screen but no back light. IF this is correct wouldn't he have the 300-400VDC on the main filter caps?
Leave a comment:
-
Re: TCL 55S401 LED LCD TV no backlight
Yes most models will not output any power if not connected, now there is a way to manipulate the Main board into thinking the strips is connected. But from my past history i have always found that if the main board and power supply are coming on and you have an image with no back light then 95% of the time you have a faulty LED strip or LEd....
Leave a comment:
No activity results to display
Show More
Leave a comment: