LCD TV Philips 39PFL3208H/12-turned picture

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • milha
    Member
    • Jun 2012
    • 48
    • Czech republic
    #1

    LCD TV Philips 39PFL3208H/12-turned picture

    Hello boys! I have here LCD TV Philips 39PFL3208H/12, chassis TPM10.1ELA, panel TPT390J1-HVN01, main board 715G5713-M0E-000-005K. This original board is burned. I have given there main board 715G5713-M01-000-005K from TV Philips 40PFL3208H/12 instead it. I thought it would be enough to set the right panel TPT390J1-HVN01 in service menu . I did so. The picture is now nice, bud vertikaly turned. Look at the photo. I have no idea how to repair it. Could you help me please? Miloš
    Attached Files
    Tags: None
    • William1967
      Badcaps Veteran
      • Nov 2017
      • 204
      • Netherlands
      #2
      Re: LCD TV Philips 39PFL3208H/12-turned picture

      Press on remote MENU-1999-back and you get into the factory menu, scroll down to HV-flip and set it to yes or no depending. After that scroll down to exit factory. After a cold reset it wil work.

        Comment

        • milha
          Member
          • Jun 2012
          • 48
          • Czech republic
          #3
          Re: LCD TV Philips 39PFL3208H/12-turned picture

          William, thank you very much. I did it how you had written. It is working properly now. Have a good luck! Miloš
          Attached Files

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Tynan Dill
              Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
              by Tynan Dill
              I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

              Upon bringing it home and plugging it up, it showed a standby light.

              I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

              The screen seems to blackout and stay black, but with a flashlight I can see the display.

              With my Playstation 4 connected via HDMI, and running a game I can hear sound.

              Assuming...
              ORIGINAL POWER SUPPLY BOARD
              7 Photos
              11-22-2024, 01:46 PM
            • m1ch43lzm
              HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
              by m1ch43lzm
              Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
              Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
              05-12-2025, 08:37 PM
            • tuner2000i
              Philips 65PUS8518/12 distorted image after main board replacement
              by tuner2000i
              hello everyone,

              I don't normally do tv repairs but this is a case with my personal TV which got fried together with many other electronics in my house after a thunderstorm.

              The TV is a Philips 65PUS8518/12 which had no power. I measured and concluded that the main board was probably fried through ethernet or hdmi. I found a board with same number 715GD328-M0F-B00-005Y (I had G) but from a 55PUS8518. The TV starts but the image is doubled, distorted. I need to set the panel code which is 016 according to the sticker on the back but I can not seem to do it.

              ...
              07-15-2025, 01:15 PM
            • howardc64
              TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
              by howardc64
              All left and right refers to looking from rear of TV (or looking from front with TV upside down)
              • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
              • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
              ...
              07-24-2025, 05:17 PM
            • spantor
              Activate power board Philips 40PFH40009/88 tv
              by spantor
              Hello partners.

              Could someone tell me how to make this Philips TV source work without the mainboard being connected? The model of the board is EAX65423701 (2.1) and the model of the Philips TV is 40PFH40009/88.
              The TV is dead, there is no standby light, however there is a voltage of 12v on the pins ( included 12v VAU ) and 3.2v on the PS-ON pin (see photo) when the power board is connected to the main board. If I disconnect both boards I only get 8 volts on 12v pins. I would like to rule out a fault in the main board by making it work, but so far no one has been able to tell...
              02-11-2024, 05:07 PM
            • Loading...
            • No more items.
            Working...