SamsungUE46D6510 Problems

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Shipmaker
    Member
    • Feb 2014
    • 36
    • Germany

    #1

    SamsungUE46D6510 Problems

    Hey everybody, got problems with my Samsung 46d6510. If I turn the tv on it got first a terrible Picture full of Lines and than it is blinking 4 times than it becames a little lightfuller blue scren but everthing without any noise, only the clicking of turning of and on!
    So the question is this kind of systoms of a bad T con or a bad Motherboard.
    Attached Files
  • budm
    Badcaps Legend
    • Feb 2010
    • 40746
    • USA

    #2
    Re: SamsungUE46D6510 Problems

    History of the TV?
    Any visual inspection and Voltage testing done?
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment

    • Shipmaker
      Member
      • Feb 2014
      • 36
      • Germany

      #3
      Re: SamsungUE46D6510 Problems

      Of corse I did the factory reset with remote controll and after it starts new with the same issues!
      But the tv does the factory resett so i suppose the mainboard isn t bad so maybe the t-con wont work?

      Comment

      Related Topics

      Collapse

      • jean luc ferre
        laptop hp g72 b52sf screen problems
        by jean luc ferre
        Hello,
        on this laptop hp g72 b52sf i have screen problems as you can see with the photo joined in attachments.
        the used graphic card is "intel hd graphics" and the id of the integrated screen is : "monitor/SEC3354".
        i verified the driver of the pΓ©ripherals and they are ok. i verified the definition and settings of the graphic card and of the screen : definition 1600x900 and refreshment frequency :60hz. (they are the sames for the graphic card and the screen).
        i don't understand the reasons of the white stripe at the bottom of the screen below the task...
        06-07-2025, 03:27 PM
      • Hondaman
        USB problems?
        by Hondaman
        Recently I discovered my SSD died (OCZ/Toshiba 240 GB). It was in a USB enclosure, attached to the Linksys WRT-AC1200 router. Since then I removed the USB enclosure and attached it to my Win7 PC (AMD 8150 CPU, 970 chipset, 64 GB RAM). I also gathered one or two other USB enclosures to figure out what is going on.

        (I suspect that I lost quite a few MP3 and FLAC files I recently ripped from my audio CDs, I think I lost very little un-replaceable stuff.)

        I think it is IMPOSSIBLE for Win7 to have any problems with a USB enclosure as long as Win7 knows how to speak to the...
        08-12-2024, 03:26 PM
      • clabr
        Lenovo 11e problems (any sata hdds are not recognized, sleep battery drain)
        by clabr
        Need help to solve some problems with this laptop.

        After working in bed with it one night and heating up too much (probably the cause of this problems) the sata HDD OS windows froze
        After restart the original Sata HDD was not recognized anymore (but works fine in other laptops or PCs)

        Tried connecting other good Sata 2.5 HDDs but not one is working in this laptop anymore (not the original nor others)

        Before this had happened I observed some other problems:
        When I tried replacing original mecanical HDD with a SSD HDD could not get them...
        12-02-2021, 08:09 AM
      • rumpumpel1
        Lenovo X13-Yoga Gen 1: hibernation problems
        by rumpumpel1
        I have a Lenovo X13-Yoga Gen 1 that has problems with hibernation mode. When the laptop goes to hibernation mode - either via the start menu or after a time-out - after a short period of activity where the power-on LED flashes, the power consumption should go down to almost 0 and the LED should go out. Most of the time, however, the power consumption indicates further CPU activity and the power LED remains on, but there is no image. Sometimes the CPU activity stops after a few minutes, sometimes not at all. If the laptop enters this state, it can only be brought back to life by a long press on...
        11-03-2024, 12:31 AM
      • howardc64
        Vizio M557-G0 1/2 panel VGHD LC1 (and maybe XON VSSQ LC2) Problems
        by howardc64
        Failure Symptom

        No Display. Just random blocks of grouped vertical red lines.
        Disconnect right 1/2 panel (rear view), left 1/2 displays properly

        Masking T-Con Signal Diagnostic

        Reduced masking to 5 signals on right 1/2 panel and get perfect picture

        Pins are

        1 GND
        2 VGHD
        3 XON
        4 VSSQ
        5 LC2
        6 LC1

        VGHD and LC1 masking is absolutely necessary to get working panel. Didn't unmask 3-5 individually.

        Pictures and Schematic

        XON, LC2, LC1 are on AUO s302-21 32pin QFN...
        10-14-2024, 01:30 PM
      • Loading...
      • No more items.
      Working...