Philips 55pfs8159 android tv bootloop
Collapse
X
-
Re: Philips 55pfs8159 android tv bootloop
So i think iv founded the problem a corrupted firmware i think or bootloader
with uart mode (iv new uart programator ) i become this code
FATAL ERROR! There is no bootable image on this machine!
Code:I2C switch set as 1 --------- I2C Initialization ---------- I2C_INIT: I2C-2 bus I2C_INIT: I2C-1 bus I2C_INIT: I2C-0 bus DDR reg 0xF7CB0BAC value : 0x00021421 DDR reg 0xF7CB0C00 value : 0x00004031 leakage info 464. set Vcpu to 1300mV, default setting by hardware. set Vcore to 1150mV, default setting by hardware. flash_ts_init() success. RDKDMP BG2Q [Oct 27 2017 18:04:12] Pinmux configuration: GSM 0xf7fcd040 0x009c0261; 0xf7ea0014: 00000072 00240611 00000253 1249008a 0xf7ea0028: 01249492 00000048 1ca54009 0430e44d 0xf7ea003c: 00000000 00000000 0000001f 63c06a52 Clock configuration: VCO_B frequency 1620 AVPLLB[4] frequency 300 AVPLLB[5] frequency 800 AVPLLB[6] frequency 1680 AVPLLB[7] frequency 610 cpuPll frequency 1200 memPll frequency 1500 sysPll frequency 800 dClk frequency 375 cpuClk frequency 1200 sysClk frequency 400 drmClk frequency 400 cfgClk frequency 100 gfxClk frequency 400 zspClk frequency 400 perifClk frequency 200 pCubeClk frequency 610 vScopeClk frequency 610 nfcEccClk frequency 100 vppSysClk frequency 400 appClk frequency 800 gfx3DCoreClk frequency 420 gfx3DSysClk frequency 400 arcRefClk frequency 400 vipClk frequency 400 sdioXinClk frequency 200 sdio1XinClk frequency 200 gfx3DShClk frequency 420 avif0Clk frequency 300 avif1Clk frequency 300 [00,sd00] bootloader: part1(start=0, blks=1, version=201710271804), part2(start= 0, blks=1, version=000000000000) [01,sd01] fts: part1(start=32, blks=32, version=201710271804), part2(start=32, b lks=32, version=000000000000) [02,sd02] recovery: part1(start=64, blks=120, version=201710271804), part2(start =64, blks=120, version=000000000000) [03,sd03] tzk_recovery: part1(start=184, blks=8, version=201710271804), part2(st art=184, blks=8, version=000000000000) [04,sd04] factory_setting: part1(start=192, blks=128, version=201710271804), par t2(start=192, blks=128, version=000000000000) [05,sd05] itm: part1(start=320, blks=128, version=201710271804), part2(start=320 , blks=128, version=000000000000) [06,sd06] boot: part1(start=448, blks=24, version=201710271804), part2(start=448 , blks=24, version=000000000000) [07,sd07] tzk_normal: part1(start=472, blks=8, version=201710271804), part2(star t=472, blks=8, version=000000000000) [08,sd08] system: part1(start=480, blks=1600, version=201710271804), part2(start =480, blks=1600, version=000000000000) [09,sd09] user_setting: part1(start=2080, blks=960, version=201710271804), part2 (start=2080, blks=960, version=000000000000) [10,sd10] cache: part1(start=3040, blks=896, version=201710271804), part2(start= 3040, blks=896, version=000000000000) [11,sd11] firmware: part1(start=3936, blks=64, version=201710271804), part2(star t=3936, blks=64, version=000000000000) [12,sd12] factory_data: part1(start=4000, blks=32, version=201710271804), part2( start=4000, blks=32, version=000000000000) [13,sd13] userdata: part1(start=4032, blks=3328, version=201710271804), part2(st art=4032, blks=3328, version=000000000000) get macaddr from fts: cpu id:38bdc6b3 5359eb9c macaddr=00:B3:53:59:EB:9C tzk boot with normal mode start to kick off SM CPU: start 0x3ff0449c, size 63216 SM CPU is kicked [ of f . L 1as]It(pSoMwe)r:m eondte eirs mnaoint St[a nd b y 6]W(SM): Entering adc_init. [ 10]W(SM): Leaving adc_init. [ 13]W(SM): PWM Initialized [ 16]I(SM): begin to run tasks [ 509]W(SM): Joystick connected [3.019337] TZ CPU0 ERROR[tz_sw_verify_image:75] verify image fail, src=0x19c0000 0, len=0x004c0c00, dst=0x19c00000GIH magic num is not correct (0x482a4d49 != 0xe ea8f2bc)!!! FATAL ERROR! There is no bootable image on this machine! tbdzz---- Img_Ld_And_Start error! Spinning now! œëYS³Æ½8[ 0] sys_init start. boot_strap=0x00000514 (source=eMMC), boot_state =0x0 [ 278] image verified, start at 0x00920000... tz kernel starting... MV88DE3114(BG2Q)-A1 total 4 cpus, v2.0.0.21, Aug 5 2014 1 4:39:52 0321[ 333] start_bootloader UªULAUNCH_ITM is set to zero board_number = 6 uiBoot = 0 I2C switch set as 0
Comment
-
Comment
-
Re: Philips 55pfs8159 android tv bootloop
So now with extra tool i can acces emmc with my pc as any one a dump or recovery.img file?Comment
-
Re: Philips 55pfs8159 android tv bootloop
hello I have the same problems
what hardware and software do you have ??
can you please give a link
Thank youComment
-
-
Re: Philips 55pfs8159 android tv bootloop
you need to tell us which chassis your Fillips ?
can you inter recovery mode?
how to inter recovery.. plug the TV out from the wall socket first
Hold and keep holding the joystick on the bottom of the TV in the "Down" position. then plug the TV in wall socket recovery mode should show on screen
here i posted mega link down load the file of wipe date as yours chassis and apply it with recovery as update from external storage.. then flash new firmware.Comment
-
Re: Philips 55pfs8159 android tv bootloop
Hello how many thanks firstly
unfortunately I do not get that far, I tried everything,
I come to nothing in recovery mode no screen is displayedComment
-
Comment
-
-
Re: Philips 55pfs8159 android tv bootloop
i think you are doing some things wrong to inter the recovery mode. you need keep press the arrow down at least for 10 seconds or little more then recovery mode will show on screen..
after that extract this zip and put it on usb to wipe data
watch this video how to do itAttached FilesComment
-
Re: Philips 55pfs8159 android tv bootloop
277/5000
Hello, thank you
I have 3 minutes synonymous tried but no function or picture
is a dump file for the fact that I can flicker the TV manuel ??
I got an update after that does not start anymore and no picture just the background light is on Sound I still have :-)
if I come in menu then I can use the wipedatatool without menu is that too ??Comment
-
Comment
-
Comment
-
Re: Philips 55pfs8159 android tv bootloop
2- you are doing wrong with upgrade file.. format your USB as FAT not FAT32.
3- make new folder on the root of the USB with name " upgrades " with out " "
then put your file upgrade inside this folder.
take your set out from AC then insert the USB in the set then plug it in ACComment
-
Re: Philips 55pfs8159 android tv bootloop
Hello
which file upgrade should I take ??
I have no files?Comment
-
Re: Philips 55pfs8159 android tv bootloop
i told you you are doing wrong....yours photo of the USB you have wrong file with .pkg
android TV file format "autorun.upg"
read this in German. and download yours chassis and model firmware
this is your firmware
after you download it.. extract it and rename it to autorun.upg put it on root of usb with out folder updrades i mentioned before... tv should be out from AC at least 1 minute then plug the usb in and turn onLast edited by Diah; 04-23-2019, 09:16 AM.Comment
-
Re: Philips 55pfs8159 android tv bootloop
so far I have the data on USB stick but I do not see, because television does not have a picture or menu, just stay on the light, how can you start the update ??
with this version I got the problem, can you take an older version ??
FUS_AND1E_10.170_prod autorun_AND1E_000.010.170.000.upg
many thanksLast edited by samtron123; 04-23-2019, 10:08 AM.Comment
Related Topics
Collapse
-
Started after unplugging power cable when TV was turned on. (remote control was lost and user didn't know where power button is located)
So my first thought is firmware corruption.
Tried autorun.upg and upgrade_loader.pkg on 16GB FAT32 MBR formatted USB stick but neither did anything. Maybe I just don't understand how to start them.
When USB inserted and TV plugged in, it just starts up and continues bootlooping. When USB plugged in and I hold down power button when plugging TV in, it just doesn't do anything.
Attached boot dump (at the end it just restarts... -
by rascaoHi,
I have a iMac A1418 board 820-00034, the problem is when the board is cold i can get to the mac os log in for like 1 min and then start the bootloop, but is a fast bootloop sometimes i can just see the apple logo for 1 sec and keeps doing it until i un plug the power, if i try to turn on again the bootloop continues, if i let the board un plug for 15 or 20 min i can turn on again and log in on Mac os but the bootloop start again under 1 min.
I try to get to the recovery and i can, when try to install a new mac os it starts loading the usb and then start the bootloop,...10-17-2024, 02:33 AM -
by DutchDIYHappy Holidays everyone!
Here I have a 60PFL8708s/12 that I am trying to revive by installing the 996597007730 Android upgrade kit;
The kit has been installed and I have followed the instructions to the letter, however upon powering on the tv with the USB stick and the files needed on there, instead of seeing 'Update in progress' all I am seeing is a black screen (backlight is fine). Also before turning on the tv, the white LED on the bottom of the tv is flashing around 60 times, before it going solid (standby mode), then I wake the tv with... -
by TR103Hi, I have a Samsung UE50TU with:
- sound and backlight, but no picture
- when it arrived, it had a picture for a few seconds
- it keeps rebooting
- without ribbon cable between the two panel boards, it does not reboot but I have no picture
- without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
- when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.
- without cable between mainboard and lcd panel and with a jumpered... -
by GrutHi everyone,
My JVC (Vestel) LED TV is stuck on a Android boot loop when I switch the power on.
Previously, I was trying to clean the storage memory (by deleting as many files as possible), I may have delete some start-up Android files.....so I screw it.🤡
When I switch the power on, the initial JVC is shown. I have tried to run Android 9 from a bootable USB on the TV. It starts reading the USB but nothing happens and the JVC logo and Android boot loop keeps the same.
Can anybody help me please finding the 17MB171 USB firmware to try to upload... - Loading...
- No more items.
Comment