Alschepmist
Senior Member
Last Activity: 12-24-2021, 04:01 PM
Joined: 07-30-2018
Location: Berlin
-
jtouch inf4030 not turning on
Hello to all i have a jtouch that doesnt turn on i have measured the voltage and seem to be ok i think the problem is software the mainboard works with amlogic s812 arm soc has any one a firmware?...Last edited by Alschepmist; 12-14-2020, 02:14 PM. -
Re: Philips 60pfl6008k/12 NVM needed
I dont know i have to test it do you mean that will solve my standby problem? -
Philips 60pfl6008k/12 NVM needed
Hello guys i have problem with a philips 60pfl6008k/12 .
The problem was a corrupted nand i have reprogrammed the nand with a generic qfu 1.2e la dump and the tv now works but i have a problem with the standby processor has anyone then NVM file backup from a working set? ? -
Re: How to force backlight on Sharp AQUOS LC-60LE635E TV
I have only this picture at the moment...Leave a comment:
-
How to force backlight on Sharp AQUOS LC-60LE635E TV
hello can anyone tell me how i can force the backlight to turn on?... -
Re: TV Sharp AQUOS LC-60LE635E TV not power ON
How do you forced the backlight to turn on?Leave a comment:
-
Re: Microsoft Surface pro 3
It works great thank you very much !!!!Leave a comment:
-
Re: Microsoft Surface pro 3
Thanks for your reply the serial number ist the same as my dump ? You have removed only the password or?Leave a comment:
-
Re: Microsoft Surface pro 3
here is...Last edited by Alschepmist; 01-04-2020, 10:18 AM.Leave a comment:
-
Microsoft Surface pro 3
Hello can anyone remove bios password from dump
But only the password have to be removed serial number and other need to stay -
Re: Microsoft surface pro 3 black screen
So the problem was only the display!Leave a comment:
-
Microsoft surface pro 3 black screen
Hello to all i have a problem witch a surface pro 3 they works great touch works but display stay black but with hdmi i can see picture on monitor i have tried windows to restore and recover but no changes the screen stay black so what can be the problem the screen or the mainboard? -
Re: samsung 55ru7409 no power
They have 33 volt on pin 10 vccLast edited by Alschepmist; 09-16-2019, 12:27 PM.Leave a comment:
-
Re: samsung 55ru7409 no power
Here is...Leave a comment:
-
Re: samsung 55ru7409 no power
Fe 6c18046 6b22 is the ic name but i cant find any datasheet .th diode are ok and yes still 0 voltLeave a comment:
-
Re: samsung 55ru7409 no power
YesLeave a comment:
-
Re: samsung 55ru7409 no power
They are all 0 voltLeave a comment:
-
Re: samsung 55ru7409 no power
1) i het 0 volt
2) i use negative leg of main filterLeave a comment:
-
Re: samsung 55ru7409 no power
I get 0 the problem is on the hot sideLeave a comment:
-
Re: samsung 55ru7409 no power
For cnm801 chasiss for transistor on hot side the 450 v capacitorLeave a comment:
No activity results to display
Leave a comment: