JVC LT-39CA120 - Vestel 17MB171 - Android boot loop

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Grut
    New Member
    • Nov 2024
    • 2
    • UK
    #1

    JVC LT-39CA120 - Vestel 17MB171 - Android boot loop

    Hi everyone,

    My JVC (Vestel) LED TV is stuck on a Android boot loop when I switch the power on.

    Previously, I was trying to clean the storage memory (by deleting as many files as possible), I may have delete some start-up Android files.....so I screw it.🤡

    When I switch the power on, the initial JVC is shown. I have tried to run Android 9 from a bootable USB on the TV. It starts reading the USB but nothing happens and the JVC logo and Android boot loop keeps the same.

    Can anybody help me please finding the 17MB171 USB firmware to try to upload the factory software when I turn it on?
    Is there any specific button or code I need to press in the remote to upload it?
    Or do I need to replace the full motherboard to make it work?

    JVC
    39" LED SMART HD TV
    MODEL: LT-39CA120
    Model: VES385WNDP -2D-N01
    Board: 17MB171

    Many thanks in advance.

    Cheers​

    Tags: None
    • Enrike santori
      New Member
      • Feb 2025
      • 3
      • greece
      #2
      Originally posted by Grut
      Hi everyone,

      My JVC (Vestel) LED TV is stuck on a Android boot loop when I switch the power on.

      Previously, I was trying to clean the storage memory (by deleting as many files as possible), I may have delete some start-up Android files.....so I screw it.🤡

      When I switch the power on, the initial JVC is shown. I have tried to run Android 9 from a bootable USB on the TV. It starts reading the USB but nothing happens and the JVC logo and Android boot loop keeps the same.

      Can anybody help me please finding the 17MB171 USB firmware to try to upload the factory software when I turn it on?
      Is there any specific button or code I need to press in the remote to upload it?
      Or do I need to replace the full motherboard to make it work?

      JVC
      39" LED SMART HD TV
      MODEL: LT-39CA120
      Model: VES385WNDP -2D-N01
      Board: 17MB171

      Many thanks in advance.

      Cheers​
      hi mate did you find any solution for your problem :; i have the same problem ,
      thanks in advance.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • NolesFan
          Samsung un82ru88000f - Boot loop sort of but can correct with taping of LVDS ribbon
          by NolesFan
          Hello all... TV started boot looping. Opened the back panel and tried to isolate the problem. Just PSB no boot loop. PSB and MB no boot loop. Plug in the LVDS from panel to MB and boot looping starts up. It doesnt matter of order that I plug the LVDS ribbons back in, only 1 and no boot loop but as soon as 2nd one plugs in boot looping. I then noticed a flicker on the screen when I was closing the clip on the harness to the LVDS. Shut the lights off so I can see better, and I noticed as i slowly close it, I will get a picture, but as soon as it clips in, I lose picture and booting happens. So I...
          2 Photos
          10-24-2024, 06:36 PM
        • Takeatry
          Yet another Samsung QLED Boot Loop
          by Takeatry
          Samsung QLED QN50Q — purchased 2022 started experiencing a delay in the picture coming on in the morning less than 2 years later. Did not know the term boot loop at that time. As the loop delay ran into a few minutes did all the recommended troubleshooting, soft and hard reset, changing cables and outlet locations, no help. As the delay increased contacted Samsung tech group and allow them remote access the tv. Tech was moving too fast to see exactly what he was doing but this ultimately it was also no help. Lived with the delay until it stretched out over 6 hours. Pulled of off the back cover...
          2 Photos
          10-04-2024, 02:57 PM
        • blaster_
          Samsung UE49MU6105K - boot loop, horizontal lines
          by blaster_
          Less than a year out of warranty, samsung UE49MU6105K craps out, they've got this designed obsolescence down to an exact science of self destruct when out of warranty...

          Screen started to show horizontal lines and ghosted image at the bottom, then turned off by itself. Did software update, to no avail of the line problem, and got a boot loop after some minutes of watching TV. This boot loop will turn on the backlights for some seconds the sound comes on, the image will turn dark very fast and then it reboots again. Pressing power button will not put it on standby. Disconnecting...
          06-22-2022, 05:19 PM
        • torchzack
          Samsung 55" TV - Boot loop but sometimes works fine - UE55MU6470U
          by torchzack
          Hi Team - just joined to see if anyone can offer some expertise in diagnosing an issue with a TV.

          I've done a few hours googling and youtubing but just seeing if anyone has any insight here. I got a 55" Samsung UE55MU6470U which seems to boot loop and then after 10 mins will boot, work for a few minutes, then turn off and repeat.

          Whilst it's on into the normal Samsung menu/boot screen it looks perfect - so I can't see there being any screen issues. I've seen lots of videos with taping across clock lines to diagnose which particular one may be an issue but i don't...
          08-28-2023, 07:42 AM
        • luis71
          PANASONIC TX-43HX580E VESTEL 17mb230 Boot Loop issue
          by luis71
          Hello,i have panasonic TX-43HX580E,I tried to enable 48 bit color,HDR10+ and ALLM and stuck at boot loop screen.I have modified edid.edid.

          I have backed up PQ,SPI,and Profile if anyone want

          Which usb_auto_update_??.txt can i use to dump firmware?

          I would be grateful if anyone could help me to find the firmware for USB recovery.


          ...
          11-05-2023, 06:31 AM
        • Loading...
        • No more items.
        Working...