LG 65lb5200 screen solarization

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jchro
    New Member
    • Sep 2018
    • 7
    • United States

    #1

    LG 65lb5200 screen solarization

    Hi,

    I just replaced the main board after reading up on how to fix a “power on but no screen issue.” Now the tv and screen turn on but the screen is very solarized. From what I read since both the screen and the settings menu both solarize that points to the tcon board or the screen itself.

    Before I replace the tcon, is it possible the new problem is still with main board?

    I'm going to try the bake trick on my old main board and see if it work.

    Thanks!
  • Andrew F. Ali
    Badcaps Legend
    • Jan 2014
    • 2450
    • Trinidad & Tobago

    #2
    Re: LG 65lb5200 screen solarization

    Is the Main Bd an exact replacement i.e. The same No. from the white label etc? Sometimes you can go into the OPTION BYTE menu and switch the screen options for the TV to show again. It may not necessarily mean a bad T-CON Bd.

    Comment

    • Davi.p
      Hobbist Tech
      • Sep 2009
      • 4333
      • Italy - Milan

      #3
      Re: LG 65lb5200 screen solarization

      The board could come from a different equipement tv, ie a different screen, it means probably a different size of screen then you have to upgrade the SW for the right model then enter service menu and do a reset. bye.

      Comment

      • jchro
        New Member
        • Sep 2018
        • 7
        • United States

        #4
        Re: LG 65lb5200 screen solarization

        Thanks! Any suggestions on how to enter the service menu on this model? All the LG instructions I am finding are not working.

        Thanks again,

        Comment

        • ducky29
          Badcaps Veteran
          • Dec 2015
          • 370
          • Europe

          #5
          Re: LG 65lb5200 screen solarization

          You need a service remote control to access it. You can get it on ebay for like 15-20 $

          Comment

          • Davi.p
            Hobbist Tech
            • Sep 2009
            • 4333
            • Italy - Milan

            #6
            Re: LG 65lb5200 screen solarization

            You can also do the reset usually by shorting pin 5,6 of the settings eeprom then putting the power cord and then release. The correct eeprom is the bigger one 8pin.

            Comment

            • jchro
              New Member
              • Sep 2018
              • 7
              • United States

              #7
              Re: LG 65lb5200 screen solarization

              Got the service remote for this tv. When I press instart. Nothing happens. I don’t think I’m skilled enough for shorting the pin instructions. Thanks! Frustrated but having fun!

              Comment

              • ducky29
                Badcaps Veteran
                • Dec 2015
                • 370
                • Europe

                #8
                Re: LG 65lb5200 screen solarization

                Press the adj button and then change the model from there

                Comment

                • jchro
                  New Member
                  • Sep 2018
                  • 7
                  • United States

                  #9
                  Re: LG 65lb5200 screen solarization

                  Nope adj button doesn’t work either. Standard button work, just not the service remote buttons. I have a mkj39170828 factory sac remocon remote.

                  Comment

                  • ducky29
                    Badcaps Veteran
                    • Dec 2015
                    • 370
                    • Europe

                    #10
                    Re: LG 65lb5200 screen solarization

                    Try in stop and then adj?

                    Comment

                    • jchro
                      New Member
                      • Sep 2018
                      • 7
                      • United States

                      #11
                      Re: LG 65lb5200 screen solarization

                      In stop then adj also doesn’t work.

                      Comment

                      • Davi.p
                        Hobbist Tech
                        • Sep 2009
                        • 4333
                        • Italy - Milan

                        #12
                        Re: LG 65lb5200 screen solarization

                        The instruction on how to use a service remote is on every service manual..

                        Comment

                        • jchro
                          New Member
                          • Sep 2018
                          • 7
                          • United States

                          #13
                          Re: LG 65lb5200 screen solarization

                          Good advice on the service manual. Didn’t even need a service remote. Input 3195 gets you in the factory menu. Thanks!

                          Comment

                          Related Topics

                          Collapse

                          • advant
                            Driving a Sharp TCON/panel with a universal main board
                            by advant
                            This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

                            I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
                            02-03-2020, 12:25 AM
                          • maxim2511
                            LG 55EC930V OLED - swich on swich of no screen
                            by maxim2511
                            My Oled Tv is 55inch tv, 3 days ago I notice that middle of the screen is getting warmer and on picture I have ghosting, missing red color. Color red was still displaying, but it was not so strong as corners of the screen and watching some movies makes me angry.
                            Then I get an idea to take it apart and clean boards from dust.
                            In side of Tv was not so bad, I take compressed air in can, and gently blow up.

                            Also I was thinking to styrofoam sponge to isolate power board from screen that the middle of the screen will not worm so much. Because Led on screen when gets higher...
                            05-14-2021, 02:21 AM
                          • JDC
                            (SOLVED) - ONN 100012588 No Power, Then Rebooting After Main Board Change
                            by JDC
                            ONN 100012588
                            Issue: No Power, Then Rebooting After Main Board Change

                            Short answer: replace main board and power board
                            Technical answer: replace main board and Q306 & Q307 on power board.

                            Long answer:

                            TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge....
                            07-15-2022, 07:39 AM
                          • Hakuu
                            LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
                            by Hakuu
                            Hi There,

                            This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

                            After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

                            More Details

                            TV Model - LG OLED77G1PUA

                            Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
                            07-12-2023, 02:37 PM
                          • Lee M.
                            Samsung UN75RU8000FXZA bad main board?
                            by Lee M.
                            When plugged in it will click and cycle the BL on and off, no pic and does not respond to remote. When I disconnect the cable from the PS board to the main board and then plug it in the BL will come on and stay on. There are only two boards in this set, the LVDS cables from the panel driver boards connect directly to the main board. Since the BL comes on and stays on I'm thinking the PS board is ok and the problem is on the main board. Should I order another main board or do I need to do more testing? thanks, Lee
                            11-08-2023, 07:46 PM
                          • Loading...
                          • No more items.
                          Working...