I have 3 small blue disc capacitors that I need to replace. The only marking on them is the number 106. Any idea how to find replacements of these
-
-
Re: Identification of Capacitor
106 = 10µf, now if we had a picture and where it is used....Last edited by R_J; 07-16-2018, 07:21 PM. -
Re: Identification of Capacitor
http://www.kiloohm.info/3-digit-capacitor/106
here is a calculator site you can use.WHY CAN'T PHILIPS USE PHILLIPS HEAD SCREWS?Comment
-
Re: Identification of Capacitor
It's used on a y main board. My phone won't let me attach the photo but here is a link to the caps I'm having issues with.
https://m.youtube.com/watch?v=n6h7P-ZATnwComment
-
Re: Identification of Capacitor
I can't be sure as I don't have that board but I would guess something like Ceramic 10µf 50volt. Maybe someone else has replaced them and knows what they are exactly.Comment
-
Re: Identification of Capacitor
Yea I don’t know how they expect someone to know what kind of cap this is with the only marking of 106 on it.Comment
-
Re: Identification of Capacitor
What is the P/N of U5014?
Those 3 caps (C5050, 5152, 5153) look to be connected in parallel and used as filter cap on the Cathode pin of the D5005, the Anode is connected to one of the Transformer T5000. That section looks to be SMPS, the IC U5014 is for driving the primary winding of T5000.
Did you remove the 3 caps to check the capacitance?
Is this your board: LJ92-01906A?
http://www.shopjimmy.com/samsung-lj9...n-drive-1.htm#Last edited by budm; 07-16-2018, 09:50 PM.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: Identification of Capacitor
I can't see the voltage being that high, maybe 25v cap wouldbe fine. They seem to be used as the filter caps for the voltage supplied by D5005, they seem to be in parallel for a total of 30µf. You should be able to measure the voltage and pick a cap that is higher.
Poly caps at 10µf look quite large even at lower voltages
Ceramic at 10µf look about the right size
https://www.digikey.com/products/en/...=1&pageSize=25Comment
-
Re: Identification of Capacitor
Replaced many of these 10 uf at 50 v ceramic
got mine from RS components
https://au.rs-online.com/web/p/ceram...itors/8118373/Comment
-
Title:
Capacitor detached from PCB – RTX 2070 Super Founders Edition
Description:
During maintenance on an RTX 2070 SUPER Founders Edition, I found a capacitor lying on my desk after reassembly.
I did not notice it detaching, so I am unsure of its original location on the PCB.
Procedure performed:
- Removed backplate
- Cleaned heatsink and PCB with isopropyl alcohol + soft ESD brush
- Reapplied thermal compound
- Reassembled card
Observed behavior after reassembly:
- GPU powers on and operates normally under... -
I read EBOOK of Testing Electronic Component and found that
"In order to test the small blue resin coated ceramic disk capacitor which has 104 50v specification,it is possible to test this small ceramic capacitor by making use of analogue meter.
Set to times 10Kohm that has 12v output from the probe to check disorder of ceramic capacitor.
It is not uncommon that testing result of digital capacitance meter is okay,But It show shorted reading when you check it with analogue meter."
Is it really possible to test small ceramic disc capacitor with analogue... -
Dead PS5 CFI-1216A, only 12v present on the board EDM-033
Blown capacitor which is located 'under' HDMI Decoder IC on the other side of the board. Does anyone know what is the value of the capacitor, please? Pics included.
Thank you... -
Hi there,
Beginner's question, sorry to waste your time...
I'm not certain of the values for the capacitor highlighted (on the picture with the tape) as I am seeking a replacement. Am I correct, looking at the schematics) to think it is a 33 pico Farad (pf) 25 Volts? The size seems to be 0201 from what I can assess and when I try to source a replacement, I'm struggling to find one and it doesn't look like something common.
Any help or suggestion welcome. This is on an Asus FX506H Quanta NJJ DANJJMB1AA0 Rev 1A... -
taken from my thread about car alarm siren here: https://www.badcaps.net/forum/troubl...rm-siren-issue
there are 2 caps which im looking to get replacements for.
Branded as Gemcon
single 100uf 16v 6.5mm x 11.5mm
single 100uf 50v 8mm x 11.5mm
lead spacing is around 3mm
there is space for 16mm tall caps
rs components is good place for me to go since its close by, what replacements do you suggest and do these need to be low esr?
the caps have...
Comment