everything works fine just all four HDMI ports get 'no signal' tried different cables known working, same results, really thought I would come here and find an answer right away but surprised there was no post on this yet, Any ideas?
-
-
Re: Vizio VM60P no HDMI
HDMI ic or it's surrounding components maybe.
Photos always help. -
Re: Vizio VM60P no HDMI
Haven't tested everything but using component inputs now without a problem. This was a TV that was gifted to us after a few months the HDMI stopped working, might have worked again at some point but now all four ports produce a no signal message on the TV. I can test the other ports if you think it would offer some insightComment
-
Re: Vizio VM60P no HDMI
update: so I started to play with the inputs turning TV off and on, seems HDMI #1 port works if I leave the inputs on ( camera or Fios STB on) and cycle the TV. But port#1 shows on all four HDMI inputs. I did plug an HDMI into #4 and same mirroring to other ports but I cant duplicate it again.Last edited by trex66; 04-08-2018, 10:45 AM.Comment
-
Re: Vizio VM60P no HDMI
The SIL9025 is a 2 channel HDMI receiver, which are split to 4 HDMI ports via 2 splitters again. At least the mainboard on SJ showed as such. Since all other ports work as they should, I think that this IC may be your problem.Comment
-
Re: Vizio VM60P no HDMI
Is there any way to test this or should I try a main board swap? I was hoping for something easy to fix, main boards are hard to find for this modelComment
Comment