Marantz SR4003 AVR HDMI board issue, seeking for help

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • aliougm
    Member
    • Oct 2021
    • 11
    • Taiwan
    #1

    Marantz SR4003 AVR HDMI board issue, seeking for help

    I have problem with my AVR(Marantz SR4003) HDMI board issue. I connect to my TV but screen color distorted,see attached picture.

    Connection as below:
    Set-top box HDMI output >AVR 3 HDMI input/one HDMI output>HDTV HDMI port
    If I bypassed AVR then HDTV screen color be good.

    I take out HDMI board from AVR and check services manual the schematic shown the HDMI signals path:
    3 HDMI input port > SIL9185 chip(HDMI switch) > SIL9033 chip(HDMI receiver) > SIL9030 chip(HDMI transmitter) > HDMI output port

    I replaced all of these three chips but no change. Power to chip 1.8Vand 3.3V is fine. I have no idea what the next I can do.

    Anybody has experience to deal with such problem, please advice, thanks!
    Attached Files
    Last edited by SMDFlea; 05-02-2022, 09:11 AM. Reason: Marantz SR4003
    Tags: None
    • nomoresonys
      Badcaps Legend
      • Jan 2013
      • 12276
      • U.S.
      #2
      Re: AVR HDMI board issue, seeking for help

      probably already tried it but did you try a different hdmi cable?

        Comment

        • aliougm
          Member
          • Oct 2021
          • 11
          • Taiwan
          #3
          Re: AVR HDMI board issue, seeking for help

          Yes, replaced HDMI cable nothing change!

            Comment

            • aliougm
              Member
              • Oct 2021
              • 11
              • Taiwan
              #4
              Re: AVR HDMI board issue, seeking for help

              Solved:
              I found one pin of SIL9033 non-wetting. soldering all of pin once problem was solved. Share it may help for you.

                Comment

                • nomoresonys
                  Badcaps Legend
                  • Jan 2013
                  • 12276
                  • U.S.
                  #5
                  Re: AVR HDMI board issue, seeking for help

                  Nice, glad to hear it.

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • aliougm
                      Seeking for Marantz DSP firmware SR4003 or SR6003 AVR
                      by aliougm
                      Anyone can provide Marantz DSP firmware for SR4003 or SR6003 AVR ? Or where I can to get it ?
                      05-09-2022, 03:16 AM
                    • ratdude747
                      Intel HDMI Windows 10 issue
                      by ratdude747
                      Got my butt kicked by windows 10 and intel last week.

                      I have an HDMI switch and splitter setup for an AV rig (church) that I was trying to use the windows 10 half of my Lenovo T440s with. However, the audio will not work; HDMI (displayport) audio doesn't show in device manager and Intel's Control Center shows the external display as not supporting audio. Direct connect it to things and (if memory serves) it does work.

                      Compounding the issue is that I'm forced to use Lenovo's drivers... as the generic intel ones refuse to install as they detect it's a lenovo system...
                      12-04-2022, 07:34 AM
                    • sebulica
                      Asus FX705DT eDP and HDMI output issue
                      by sebulica
                      Hi

                      I have an Asus FX705DT that had waterdamage....a lot

                      I have managed to make the motherboard look like working but i stil have some issues and maybe someone can point me in the right direction.

                      The laptop has a destroyed keyboard and the display is dead but i have managed to make the board start up and work "normal"...i have no short,power rails are looking good,hdd/ssd activity and so on.

                      The problem is that there is no HDMI output,only sometimes makes the tv/monitor go black screen for a brief moment,and on the internal...
                      04-06-2023, 04:44 AM
                    • Ado02
                      Dell Latitude 5510 USB-c Hdmi Issue
                      by Ado02
                      Hi,

                      I am working on a Dell Latitude 5510 - the USB-c port has not HDMI output. The port works for data transfer and charging but not for HDMI.

                      I check the USB-c port but can't see any damage.

                      Has anyone experienced this problem and found a solution?
                      04-05-2023, 02:55 AM
                    • rounin
                      MacBook Air A2337 (820-02016) USB-C Port Issue – Only Works in One Orientation (CC Line Problem?)
                      by rounin
                      Hi everyone,

                      I'm working on a MacBook Air 2020 (A2337, board 820-02016) and running into a strange USB-C issue. I've gone through quite a bit of testing and part replacement, but I'm stuck — hoping someone here can shed some light.

                      🛠 Original Issue
                      The machine initially wouldn't negotiate 20V over USB-C — stuck at 5V.
                      Diagnosis showed PP1V5_UPC0_LDO_CORE shorted to ground.

                      I replaced U3100 (UF400) using a donor board (A2179), and the machine powers on fine now.

                      ⚠️ New Problem: One USB-C Port Only Works in One Orientation...
                      04-19-2025, 01:18 AM
                    • Loading...
                    • No more items.
                    Working...