lg tv 42lv450 does not start

Collapse
X
Collapse
 
  • Page of 5
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 4 5 template Next
  • Moddingscreen
    Senior Member
    • Dec 2017
    • 65
    • Italia
    #81
    Re: lg tv 42lv450 does not start

    FINALLY!!!! solved I basically swapped all the eprom that were present on the old pcb, et voilá, guys thanks for the support you gave me you were very helpful thanks very much, attached photo of what I swapped
    Attached Files

      Comment

      • freakaftr8
        Badcaps Legend
        • Oct 2012
        • 3743
        • USA
        #82
        Re: lg tv 42lv450 does not start

        Good to hear!

        Just curious now that it's working what exactly is DRV on doing when it's running? Should have something like 2.5 to 3.4 V on that pin
        Last edited by freakaftr8; 01-11-2018, 07:27 PM.
        Did I leave the soldering iron on?

          Comment

          • Moddingscreen
            Senior Member
            • Dec 2017
            • 65
            • Italia
            #83
            Re: lg tv 42lv450 does not start

            I reassembled everything, tomorrow I can reopen it and I'll let you know, thanks again for the support

              Comment

              • freakaftr8
                Badcaps Legend
                • Oct 2012
                • 3743
                • USA
                #84
                Re: lg tv 42lv450 does not start

                Don't worry about it.
                Did I leave the soldering iron on?

                  Comment

                  Previous 1 2 3 4 5 template Next

                  Related Topics

                  Collapse
                  • mohsinrizwan
                    LG TV 49LW5700 does not power no Standby Voltage(PSU EAX62865401)
                    by mohsinrizwan
                    Hello,

                    I have LG 49LW5700 which is not turning on, when I checked there was no standby (3.5V) can anyone guide how I can trace which component is faulty.

                    Thanks
                    05-28-2022, 10:35 AM
                  • mohsinrizwan
                    LG TV 47LW5500 does not power on (PSU EAX62865401/Main board EAX64405501)
                    by mohsinrizwan
                    Hello,

                    My LED died while checking on PS-ON test not seeing any voltage.

                    Here is result on PS-ON Pin 1 jump to Ping 9-10-11 or 12 (3.5V)

                    23 - N.C -> 0V | 24 - ERROR -> 0V
                    21 - 12V -> 0V | 22 - PWM -> 0V
                    19 - 12V -> 0V | 20 - N.C -> 0V
                    17 - 12V -> 0V | 18 - DRV-ON -> 0V
                    15 - GND -> 0V | 16 - VSYNC -> 0V
                    13 - GND -> 0V | 14 - GND -> 0V
                    11 - 3.5V -> 3.52V | 12 - 3.5V -> 3.52V
                    9 - 3.5V -> 3.52V...
                    08-02-2020, 01:53 PM
                  • desone01
                    Changing Dell Asset Tag
                    by desone01
                    I have dug through my Dell utilities and located an old Dell Engineer's program which changes the Dell Asset Tag. I have used this SUITE of programs in the past to amend the Asset Tag on second hand motherboards I have installed.

                    I don't know if it works with the newer Dell laptops. You should use extreme caution in using these programs. As you can see the program is fairly old one.

                    Here are the instructions from the README file:

                    SVCTAG.EXE

                    **********************************************************
                    Dell Internal Use                    ...
                    09-04-2020, 07:33 PM
                  • atari1968
                    LG TV 42LW5700 does not power on fully (PSU EAX62865401/Main board EAX64405501)
                    by atari1968
                    My LG 42LW5700 doesn't power on. when tv plugged on the standby light is
                    a very week until I switch power on then the standby light blinking slowly.

                    After checking the power supply,
                    I measured the output voltage after switch on and everything looks okay

                    Please see the attached picture of the voltage test for the output ports.

                    So probably the power supply is ok and the problem could be on the mainboard EAX64405501,
                    The standby led is always very dim until I switch on and then the led start to blink (high and dim not in the same...
                    08-16-2019, 08:20 AM
                  • Syseng
                    Lenovo P14s Gen 5 SVP unlock
                    by Syseng
                    This sums up discussion related to Lenovo P14s Gen5 in this thread. Credits go to Sbaro and especially Maxpower3. The locked dump is attached.

                    The device is based on NM-F871 motherboard with Nuvoton NPCK397 series controller. The motherboard also contains three BIOS chips: two different Winbond chips for main BIOS and external EC flash, and also a Gigadevice chip which purpose I do not know. The password information is contained directly in controller and thus can be manipulated by reprogramming it, so reprogramming BIOS chips is technically not required, however you may wish to make...
                    06-22-2025, 07:44 AM
                  • Loading...
                  • No more items.
                  Working...