Hi guys, I have a Panasonic that comes out of standby just fine,then the screen go's a dark blue and that's it,no picture no sound, no graphics, nothing. Any sudgestions?
Thanks in advance
Thanks in advance
-
-
Re: Panasonic Tx37lzd80
Need good clear straight on pictures of back of tv with cover off and each board.I assume no responsibility for any stupid suggestions I might post. -
Re: Panasonic Tx37lzd80
Il take a few pics when I get in later, the back light led's are lit if that's any help.Comment
-
Re: Panasonic Tx37lzd80
check your fuse on the t-con to star with.
and pics.WHY CAN'T PHILIPS USE PHILLIPS HEAD SCREWS?Comment
-
Re: Panasonic Tx37lzd80
Il have a look for the fuse now, I'm having trouble uploading pics, bloody computers
Comment
-
Re: Panasonic Tx37lzd80
PicturesAttached FilesComment
-
-
Re: Panasonic Tx37lzd80
Could you give me a hint as to where the fuse is on the t con panel?Comment
-
Re: Panasonic Tx37lzd80
It looks like the fuse is open circuit, what rating is the fuse, is it 1.6ah as marked on the board?Comment
-
Re: Panasonic Tx37lzd80
The picture uploaded post #6 appears to be the power supply board. Is that where the blown 1.6Amp fuse is or is it on the Tcon boardWilling to help but I'm no expert.Comment
-
Re: Panasonic Tx37lzd80
It's on the t con board 24v 1.6ahComment
-
Re: Panasonic Tx37lzd80
Go ahead and replace it with a 1.6A fuse. I suspect it's an smd fuse?Willing to help but I'm no expert.Comment
-
Re: Panasonic Tx37lzd80
Some decent pictures would help. I would connect an ammeter momentarily across fuse and check current draw. Use min/max if you have itI assume no responsibility for any stupid suggestions I might post.Comment
-
-
Re: Panasonic Tx37lzd80
It's hard to find ppl selling them online, where do you go for yours? I wonder if a wickman fuse would workComment
-
Re: Panasonic Tx37lzd80
Does it matter if the voltage rating is higherComment
-
Re: Panasonic Tx37lzd80
Hello Norman, without any pictures it would be total guesswork as to what type and size of fuse is on your board. If it's smd is it 603, 805, 1206?
I get my replacement fuses from ebay since they tend to be low value parts and can be sent by ordinary letter post.
https://en.wikipedia.org/wiki/Surface-mount_technologyWilling to help but I'm no expert.Comment
-
Re: Panasonic Tx37lzd80
Don't know if the quality of this pic is good enough to seeAttached FilesComment
-
-
Re: Panasonic Tx37lzd80
You weren't wrong there.
Measure it as best you can and check against the chart. For example if its a 1206 type then it will measure 3.2mm x 1.6mm.Willing to help but I'm no expert.Comment
-
Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing here🤔?
Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting 😂.
TV Model: Panasonic TC-P55ST50
...11-20-2024, 08:52 PM -
Hello. I am asking you for a hint on how to solve the problem with my touchbook Panasonic CF53-2 standart model. After setting up the BIOS, the laptop displays the wrong image until Windows loads. (More precisely, it displays, but distorted, instead of the Panasonic image immediately after turning it on, it displays what is in photo #1 in the attached file) Then the image appears when Windows starts loading and then there are no problems with the screen until the reboot. If you enter the BIOS, just a black screen. If you connect an external screen, the image on it is the same as on the built-in... -
Hi everyone!
I happened several times, in the search for help from the web, to consult this very interesting forum.
So I decided to sign up and I intend to participate actively by making available my knowledge and experience on the subject, I'm a new user but at the same time I'm old in the sense that I have 4 decades of experience in repairing and designing electronics but above all I'm a great passionate about the subject.
Having said that I come to the gist of my post on the forum as the title suggests.
For my passion for technology I'm now collecting several... -
Good day,
I have tried to remove BIOS supervisor password from Panasonic Toughbook CF-33 mk1. Model number CF-33AENABTG, unfortunately I don't have any other info.
I read the BIOS using afuwin, edited it and tried to flash new edited BIOS using afuwin. Unsuccessfully. Afuwin showed "Error: Problem erasing flash." starting with 0x00040000 and stoped. Then I tried many other options to flash BIOS from Windows without any luck. Finally i rebooted the device - and no post. Afterwards I have read the corrupted bios chip (MX25L12873F) using EZP2010 programmer.... -
Hello ,my Panasonic CF-H2AU24EF3 I get bios password locked after factory reset, can't enter bios
I need help to remove it,
thankyou all.
Panasonic CF-H2AU24EF3
SN; 2FKCA26876...
Comment