What should be the Voltages LED Strips?

Collapse
X
 
  • Time
  • Show
Clear All
new posts

Related Topics

Collapse

  • Capacitorial
    Powersupply has all the voltages - Monitor still no power
    by Capacitorial
    Hello guys,

    I have a Philips 240B7QPJEB. The monitor seems completely dead.
    I opened it and measured the voltages of the powersupply. I found that a mosfet was dead and replaced it.
    On the connector, that goes to the TCON board, all voltages 15-19V and 5V are present.
    The small connector on the left of the PSU has two cables with 18V and all the other have 0.2V. It connects on this small connector on the left ontop of the panel. I guess the backlight? Seens fine I guess.
    The weird thing is, that the Power LED is powered over the TCON board.
    On The TCON...
    12-28-2024, 02:12 PM
  • Tynan Dill
    Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
    by Tynan Dill
    I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

    Upon bringing it home and plugging it up, it showed a standby light.

    I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

    The screen seems to blackout and stay black, but with a flashlight I can see the display.

    With my Playstation 4 connected via HDMI, and running a game I can hear sound.

    Assuming...
    11-22-2024, 01:46 PM
  • h4rdw4re
    Grundig 40VLE7131BF led strips doesn't light up
    by h4rdw4re
    Hi guys,
    I have one very old TV.
    Main problem I have with this tv is that led strips won't light.
    I measured voltage levels, and inverter input is 24V.
    other voltages are also ok.
    What I found is that removing and connecting again connector CN1 led strips lights for shorts time (but only once). When led strips lights up then light is uniformly spread on whole panel.
    First I thought that led strips are dead, but I'm quite sure that problem is not strips related.
    I don't know what voltage level is at output of inverter board (samsung SSL400_3E2A) and how...
    10-09-2022, 11:10 AM
  • edugimeno
    Help findinf LED strips for TDSystems K32DLT1H
    by edugimeno
    Hi There!
    I bought a broken 32" TV today. It has sound but no image. I checked with a flashlight and it was missing backlight
    Disassembled down to the led strips and found this TV has been serviced before. Not sure if it was fixed, worked again for some time, and broke again, or maybe last repair wasn't successful

    Looks like on previous repair, the center LED strip was replaced with a different model, 7 leds in it instead of 8, but when checking LEDS one by one, leds on the center strip were brighter with same test voltage (multimeter in DIODE mode) so maybe the...
    11-05-2022, 03:36 PM
  • eccerr0r
    What to do with bad LED strips?
    by eccerr0r
    I suspect a lot of you have done a lot of repairs and end up with a lot of bad LED strips...what do you do with them?

    Wonder if I should get a pile of LED chips and try to replace the bad units for the heck of it, but I don't really need the strips at the moment because I bought the strips...

    Oh... and I think I got my TV working again, though not 100% I don't think, on a white screen I can see a bit of the ghost of the LED strips, must have done something wrong or the LED strips aren't quite the same as the original...
    10-22-2022, 12:27 AM
  • Loading...
  • No more items.
Working...