lg tv lightening strike

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • thuss
    Badcaps Veteran
    • Jul 2012
    • 321
    • uk

    #1

    lg tv lightening strike

    55LB652V Mainboard EBT62987206

    I had a lightening strike on the above tv. The tv still comes on and responds - menus are all there and are crystal clear plus it connects to the internet .

    Tv still connects via the scart etc.

    The problem I'm getting is that if for instance I choose to watch top gear or any program via the antenna or internet I will get nothing but a flashing screen pinkish in colour that flashes and the sound is poor and crackles. (google page is fine)


    Has anyone repaired one of theses? (I get a feeling that I have to replace the main board? Ive tried depressing the two tiny reset buttons but still no change.

    Thanks in advance
    Attached Files
    Last edited by thuss; 06-22-2017, 07:08 PM.
  • dskall
    Badcaps Legend
    • Oct 2016
    • 2905
    • usa

    #2
    Re: lg tv lightening strike

    You can remove cover off of tuner and see if any damage
    I assume no responsibility for any stupid suggestions I might post.

    Comment

    • dick_barton
      Badcaps Legend
      • Aug 2015
      • 6643
      • Wales

      #3
      Re: lg tv lightening strike

      Have you tried a firmware update in the case of data corruption.

      http://www.lg.com/de/support/service...kt/lg-55LB652V

      In German but files are in English.
      Willing to help but I'm no expert.

      Comment

      • thuss
        Badcaps Veteran
        • Jul 2012
        • 321
        • uk

        #4
        Re: lg tv lightening strike

        The tuning module is shot- the tvs not tuning in the signal test isnt working - tried a software update but no joy- have to replace the main board

        But thanks for the advice

        Comment

        • dick_barton
          Badcaps Legend
          • Aug 2015
          • 6643
          • Wales

          #5
          Re: lg tv lightening strike

          Have you checked that you still have a supply voltage on the tuner pins. It's probably 3.3V
          Willing to help but I'm no expert.

          Comment

          • thuss
            Badcaps Veteran
            • Jul 2012
            • 321
            • uk

            #6
            Re: lg tv lightening strike

            I will check that- do I basically turn the main board round whilst using cardboard as a buffer and check the pins?

            Comment

            • thuss
              Badcaps Veteran
              • Jul 2012
              • 321
              • uk

              #7
              Re: lg tv lightening strike

              Sorry about late reply - I got my hands on a main board with the same eax number but with a different ebt number - surprisingly it worked, apart from the 3d option. It was cheaper at 20 pounds (apart from no 3d)

              Comment

              • thuss
                Badcaps Veteran
                • Jul 2012
                • 321
                • uk

                #8
                Re: lg tv lightening strike

                The mainboard is identical to the one I removed apart from no 3d.

                Can I access the service menu and turn on the 3d and also tell the main board its now fitted to a 55lb652v panel?

                How do I access the secret menu on the old lgs it was menu and menu or ok and ok.

                Thanks in advance
                Last edited by thuss; 06-27-2017, 07:13 PM.

                Comment

                • vinceroger69
                  Badcaps Legend
                  • Mar 2012
                  • 6714
                  • uk

                  #9
                  Re: lg tv lightening strike

                  There is a lg service menu app for android phones saves buying a lg service remote not sure if it can turn 3d on and off though
                  Attached Files

                  Comment

                  • thuss
                    Badcaps Veteran
                    • Jul 2012
                    • 321
                    • uk

                    #10
                    Re: lg tv lightening strike

                    thank you -do i unzip this and install this onto a android phone?iphones don t count
                    Last edited by thuss; 06-28-2017, 02:43 AM.

                    Comment

                    • vinceroger69
                      Badcaps Legend
                      • Mar 2012
                      • 6714
                      • uk

                      #11
                      Re: lg tv lightening strike

                      im not sure as havnt used it myself the app was posted in another lg tv thread by diah i think there are some videos on youtube regarding the app etc

                      Comment

                      • kc8adu
                        Super Moderator
                        • Nov 2003
                        • 8832
                        • U.S.A!

                        #12
                        Re: lg tv lightening strike

                        just install app then create a remote.
                        pick tv,lg and tap the selection screen.pick lg service remote.save and name.

                        Comment

                        • thuss
                          Badcaps Veteran
                          • Jul 2012
                          • 321
                          • uk

                          #13
                          Re: lg tv lightening strike

                          Originally posted by kc8adu
                          just install app then create a remote.
                          pick tv,lg and tap the selection screen.pick lg service remote.save and name.

                          Soz I havent done this before-basically onto my android phone I install the unzipped app (uploaded kindly by vinceroger69) into a remote folder(on the tv)?

                          Comment

                          • thuss
                            Badcaps Veteran
                            • Jul 2012
                            • 321
                            • uk

                            #14
                            Re: lg tv lightening strike

                            Originally posted by vinceroger69
                            There is a lg service menu app for android phones saves buying a lg service remote not sure if it can turn 3d on and off though
                            I double clicked the file and it downloads and the it gives me two folders serviceIR folder the beginning with smart.IR.Remote.Anymote.3.2.0.apk...
                            what do I do next?

                            ( I assumed I would create a folder and download the file and extract the zipped file to the new folder)

                            thanks in advance

                            Comment

                            Related Topics

                            Collapse

                            • SluggerB
                              Panasonic TH-50PX80 killed by lightning strike, help me save her!
                              by SluggerB
                              Yes it's a 17 year old Panasonic plasma!

                              I was watching TV when there was a huge lighting strike nearby my house that shook the house. When that happened, the picture on the TV froze and the TV wouldn't turn off except by pulling the power cable. Now if you plug in the TV, it seems to turn on (it makes the turn on "clikcs" it always does, the red power light comes on but there is no picture, although I can see the back light around the edges. And the TV doesn't respond to the power button on the remote to turn off, and doesn't respond to the manual power button on the front...
                              06-04-2025, 07:02 PM
                            • Seville
                              Westinghouse TV WD48FAB100 Not Powering On – Burn Mark Found on Power Supply
                              by Seville
                              Hello all!

                              Westinghouse TV WD48FAB100 Not Powering On – Burn Mark Found on Power Supply .

                              I have a Westinghouse LED TV, model WD48FAB100 that is not powering on. Upon removing the back cover, I noticed a burn mark where the AC cord connects to the power supply/main board. In this model, there is only one board combining the two functions. Previous owner said the TV experienced a lightening strike, but who knows. I checked the main fuse, tested OK. Here are a collection of readings from the power supply ports. Looking for some guidance on what to test/check next....
                              10-10-2022, 07:31 AM
                            • habanerocat
                              Atoll ST200 Amp Power Supply Problem
                              by habanerocat
                              Hi, A friend's streamer wend down after a lightening storm. It's dead.
                              I'd like to get some pointers before I go at it as it's an expensive piece of kit.
                              I already posted this in the audio section but got no replies. So hopefully somebody with PSU knowledge can help me here.

                              I'm not familiar with the damage lightening can do so any pointers would be gratefully received.

                              I've had a look at this. Both the 5VDC and 3.3VDC are sitting on about 2VDC.
                              There's two 7805 regulators one has an output of 5VDC the other is very hot and has that 2VDC level on the...
                              08-22-2024, 07:59 AM
                            • MrCreosote
                              Lightning Strike: 55" TV dead: is display panel OK?
                              by MrCreosote
                              THE LIGHTNING:
                              This was a very close strike, blew a 15 amp breaker for all ceiling lights in home AND could smell ozone for a few minutes after strike.

                              Very close and probably a very strong EMP.

                              THE TV:
                              No standby LED. Some voltage from PSB (not totally dead).

                              But found a kit of ALL 4 circuit boards for $55.

                              At first thought, this will fix my TV.

                              But then lightning has the ability to totally fry semiconductors. Which would include any or all of the PCBs. However, the display is one big semiconductor and given...
                              08-16-2021, 10:27 PM
                            • Highvoltagerchelie
                              Sony XBR-65Z9D won't turn on after lighting strike
                              by Highvoltagerchelie
                              Good afternoon. I found this forum as I was looking for troubleshooting information for my Sony z9d. A lightning strike hit very close to the house and did nearly $30,000 in electronics damage. The TV appears completely dead with no status light and no picture. I found the Sony XBR-65Z9D service manual and followed the troubleshooting steps on Pages 21-26. All checks seem normal except DC_OFF_DET check on Page 23 R420 voltage was slightly higher than 3V. It was 3.475V and C418 was slightly higher that the 5V at 5.3V.

                              I proceeded to check the Power Board CN6401 connector. With all...
                              View and Download Sony XBR-65Z9D service manual online. GN2TR CHASSIS. XBR-65Z9D lcd tv pdf manual download.
                              11-30-2023, 04:49 PM
                            • Loading...
                            • No more items.
                            Working...