Lg 32ls575t

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • joehezzer
    Badcaps Veteran
    • Jul 2012
    • 251
    • England

    #1

    Lg 32ls575t

    Hi all I have lg 32 ls 575 t. Iam getting issues with vertical lines. Pinky/black lines. It doesn't do anything, input dont do anything and cannot change channel. Cheers picture supplied
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Last edited by joehezzer; 06-07-2017, 10:49 AM.
  • CapLeaker
    Leaking Member
    • Dec 2014
    • 8352
    • Canada

    #2
    Re: Lg 32ls575t

    I'd be verifying the LVDS cable with an oscilloscope, to see if the main board is good to start with.

    Comment

    • dskall
      Badcaps Legend
      • Oct 2016
      • 2905
      • usa

      #3
      Re: Lg 32ls575t

      Almost like it is stuck in test pattern
      I assume no responsibility for any stupid suggestions I might post.

      Comment

      • joehezzer
        Badcaps Veteran
        • Jul 2012
        • 251
        • England

        #4
        Re: Lg 32ls575t

        Originally posted by dskall
        Almost like it is stuck in test pattern


        I did wonder that myself tbh

        Comment

        • joehezzer
          Badcaps Veteran
          • Jul 2012
          • 251
          • England

          #5
          Re: Lg 32ls575t

          Originally posted by CapLeaker
          I'd be verifying the LVDS cable with an oscilloscope, to see if the main board is good to start with.
          Might have a dig around see I have another around

          Comment

          Related Topics

          Collapse

          • eccerr0r
            old X58 triple channel board... memtest86 memory speed?
            by eccerr0r
            Anyone run memory speed tests with an old X58-based triple channel 1st gen or any other >2 channel board? The one I have is a Gigabyte I think.

            Anyway I had four 4GB DDR3-1333 modules in the 6 memory slots and got around 11GB/sec memory speeds assuming that it went dual channel since it didn't have enough modules for triple channel. Now I stuck in two more 4GB modules, but they are DDR3-1600. I'm still getting 11GB/sec speeds according to memtest86...

            Just wondering, anyone do memory speed analysis on these triple (and higher) channel memory boards? Are there any...
            06-28-2025, 09:06 AM
          • spleenharvester
            Reverse engineering of 18650 4-channel tester
            by spleenharvester
            Hi friends

            I have reverse engineered this tester, schematic is attached and is complete except for capacitor values. These testers annoyingly have no model number but they are the ones you find on the first page of just about any website if you type in "18650 4-channel tester". There is also a 2-channel variant and a newer 8-channel variant. They are very cheap (about £15) and can measure voltage, current, internal resistance and capacity. They have a multicolour display for all these statistics. They also have terminal blocks so that if you want to use a breakout board...
            05-04-2025, 02:43 AM
          • mikey5791
            Help on car amplifier only one channel works
            by mikey5791
            Hi all forum members,
            Fyi, i have been working on this old model PCT-4082 (4 channel car amplifier). The owner said only one channel is working.
            My initial finding is this amp originally use Toshiba 2SA1943 and 2SC5200 transistor for its output but after opening the top casing i found it used Toshiba A1941 (pnp)and C5198(npn). I desoldered all the 4 pairs transistors and found 1 piece A1941 open(tested "OL" on all legs) and replaced the 1st pair with 2SA1943 and 2SC5200, thats why you can see in the picture it is the bigger size transistor. The other A1941 and C5198 all...
            08-06-2025, 10:36 PM
          • Stanley1843
            Screen Display Vertical Multicolor Lines
            by Stanley1843
            Hello, I have a screen in where sometimes when I open it pop-up vertical multicolor lines (I would say the most of them are green). If I tun off and turn on the screen the lines dissapear or if I leave open the screen after approximately five minutes the lines gone. I measured the below voltages on the main PCB and on the T-CON board and the voltages are the same when it doesn’t display the vertical lines and when it displays the vertical lines. Also, I cleaned all the connectors very good with IPA. I moved back and forth the connectors and the COF tabs but the vertical lines didn't displayed...
            06-29-2024, 11:54 AM
          • Syseng
            Lenovo P14s Gen 5 SVP unlock
            by Syseng
            This sums up discussion related to Lenovo P14s Gen5 in this thread. Credits go to Sbaro and especially Maxpower3. The locked dump is attached.

            The device is based on NM-F871 motherboard with Nuvoton NPCK397 series controller. The motherboard also contains three BIOS chips: two different Winbond chips for main BIOS and external EC flash, and also a Gigadevice chip which purpose I do not know. The password information is contained directly in controller and thus can be manipulated by reprogramming it, so reprogramming BIOS chips is technically not required, however you may wish to make...
            06-22-2025, 07:44 AM
          • Loading...
          • No more items.
          Working...