Seiki SE39HY03UK won't go past Seiki start up screen?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Loz2212
    Senior Member
    • Jan 2016
    • 61
    • United Kingdom

    #1

    Seiki SE39HY03UK won't go past Seiki start up screen?

    Hi guys,

    Just been given this TV for free from a neighbour. They told me it would sometimes load up and sometimes wouldn't. It's just stuck on the Seiki screen.

    I took it home, plugged it in and it worked fine all day yesterday.

    Come to it this morning and it's back to how it was with them. The seiki logo just stays on the screen and after a while it restarts and does the same again.

    Really appreciate any help from you guys.

    Thanks.
  • Loz2212
    Senior Member
    • Jan 2016
    • 61
    • United Kingdom

    #2
    Re: Seiki SE39HY03UK won't go past Seiki start up screen?

    This is a picture of the back. Not used to these new tv's. Seems like the psu and main board are combined??
    Attached Files

    Comment

    • dskall
      Badcaps Legend
      • Oct 2016
      • 2905
      • usa

      #3
      Re: Seiki SE39HY03UK won't go past Seiki start up screen?

      Looks like there is an eeprom for this board
      I assume no responsibility for any stupid suggestions I might post.

      Comment

      • Loz2212
        Senior Member
        • Jan 2016
        • 61
        • United Kingdom

        #4
        Re: Seiki SE39HY03UK won't go past Seiki start up screen?

        Originally posted by dskall
        Looks like there is an eeprom for this board
        It's strange that it is only partially corrupted.. I've had it working twice (last night and this morning until I turned it off then it wouldn't work again). It's just stuck in this boot loop. Can't get a board or eeprom anywhere.. Not really sure what to do next

        Loz

        Comment

        • dskall
          Badcaps Legend
          • Oct 2016
          • 2905
          • usa

          #5
          Re: Seiki SE39HY03UK won't go past Seiki start up screen?

          Not good at troubleshooting integrated boards could be another problem. Did find eeprom: http://www.ebay.com/sch/i.html?_from...1.p83&_sacat=0
          I assume no responsibility for any stupid suggestions I might post.

          Comment

          • vinceroger69
            Badcaps Legend
            • Mar 2012
            • 6714
            • uk

            #6
            Re: Seiki SE39HY03UK won't go past Seiki start up screen?

            try cooling or heating the eeprom ic that may prove its at fault then

            Comment

            • Loz2212
              Senior Member
              • Jan 2016
              • 61
              • United Kingdom

              #7
              Re: Seiki SE39HY03UK won't go past Seiki start up screen?

              Originally posted by dskall
              Not good at troubleshooting integrated boards could be another problem. Did find eeprom: http://www.ebay.com/sch/i.html?_from...1.p83&_sacat=0
              It's got the textbook issues with the bootloop, but I'm no expert. That eeprom is for the 32inch model for the same board.. (unless that doesn't matter). I spoke to a TV guy earlier who sells eeprom chips on ebay.. He said the board and screen number both have to match.. Can't vouch for that so bit apprehensive to order. Thanks for the reply

              Comment

              • Loz2212
                Senior Member
                • Jan 2016
                • 61
                • United Kingdom

                #8
                Re: Seiki SE39HY03UK won't go past Seiki start up screen?

                Originally posted by vinceroger69
                try cooling or heating the eeprom ic that may prove its at fault then
                Will give that a go Vince. Thanks... Now just to find out where the Mrs hairdryer is..

                Comment

                • vinceroger69
                  Badcaps Legend
                  • Mar 2012
                  • 6714
                  • uk

                  #9
                  Re: Seiki SE39HY03UK won't go past Seiki start up screen?

                  cooling is usually the better option maplin sell electronics freeze spary not cheap but is good or poundland air duster works (hold can upside down) dosnt get as cold as proper spray but does the job usually regarding heating the eeprom some people have luck and some dont but hey worth a try.

                  Comment

                  • layad
                    Badcaps Veteran
                    • Nov 2011
                    • 239

                    #10
                    Re: Seiki SE39HY03UK won't go past Seiki start up screen?

                    Any solution for this problem?? I have seike TV 50 inch does the same thing sometimes it takes ages to come on, bootloop for ages then it comes on

                    Comment

                    • nomoresonys
                      Badcaps Legend
                      • Jan 2013
                      • 12075
                      • U.S.

                      #11
                      Re: Seiki SE39HY03UK won't go past Seiki start up screen?

                      If it takes quite a while to come on then works, it may be a weak/bad capacitor, usually located on powerboard.

                      Comment

                      Related Topics

                      Collapse

                      • Ryan.man
                        Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                        by Ryan.man
                        Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                        My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                        This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                        02-04-2025, 12:23 PM
                      • smic717394
                        iphone XS turns off when press on screen.
                        by smic717394
                        Hi,

                        I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
                        07-25-2024, 10:16 AM
                      • Chrissygizmo
                        Samsung UE55JU6800K half screen dark
                        by Chrissygizmo
                        Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
                        I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
                        02-10-2025, 12:33 AM
                      • spice_disc
                        Vizio TV M50-C1 reboot cycle and static on screen
                        by spice_disc
                        I'm currently trying to diagnose and fix my Vizio TV (Model M50-C1). I've tried a number of different basic solutions, but I'm trying to determine if my issue is currently a failing panel, T-Con board, or main board (or something else entirely) and whether or not it is worth my time to fix it. Details of the issue and what I've tried are below as well as why I think it is either a bad panel, T-Con board, or main board.

                        The Issue: The TV will be on and working fine but after the TV is on for ~5-10 minutes the screen will freeze (with sound continuing) until the TV reboots itself. While...
                        09-08-2024, 02:37 PM
                      • ipatch
                        ipad pro 9.7" blew a SMD component while replacing the screen 🤦‍♂️
                        by ipatch
                        i have an ipad pro 9.7" (1st gen) A1674 where i replaced the screen, but never attached the screen to the frame/chassis (glued down) due to the ipad being previously dropped so the new screen would never fit in the frame properly. so i need flex/bend the chassis to eventually fix the new screen in properly. so i temporarily just applied blue tape around the edges of the screen to keep it in place. when watching videos with the ipad the screen started flicker, so i though maybe the new quasi cheap amz screen i purchased was going out. so i disconnected then reconnected with power still on,...
                        08-24-2024, 02:36 PM
                      • Loading...
                      • No more items.
                      Working...