Announcement

Collapse
No announcement yet.

baird 42 no picture

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #61
    Re: baird 42 no picture

    yes i had a set like this once i swopped the t con and main and never solved the issue so sold the set as it was for spares.

    Comment


      #62
      Re: baird 42 no picture

      No way to test i suppose,

      Comment


        #63
        Re: baird 42 no picture

        with a proper tester yes dick_barton posted a thread earlier and a scope on the lvds wires may prove the mainboard is sending out signals and is good but thats two extra bits of equiptment too buy if you dont have them then its learing how to use them etc.

        Comment


          #64
          Re: baird 42 no picture

          Just funny isnt it, me a 17 year old lad can understand stuff alot better because I spent hours up hours researching and rather than asking questions that have been answered and found the answers because I was bothered.
          Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

          https://www.facebook.com/Telford-Tel...7894576335359/

          Comment


            #65
            Re: baird 42 no picture

            Originally posted by vinceroger69 View Post
            with a proper tester yes dick_barton posted a thread earlier and a scope on the lvds wires may prove the mainboard is sending out signals and is good but thats two extra bits of equiptment too buy if you dont have them then its learing how to use them etc.
            You dont even need a scope matey, you can use a DMM to check most the LVDS outputs still picks up the variants out the Tcon and if it shuts its self down due to an issue on the panel.
            Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

            https://www.facebook.com/Telford-Tel...7894576335359/

            Comment


              #66
              Re: baird 42 no picture

              Originally posted by ReeceyBurger123 View Post
              You dont even need a scope matey, you can use a DMM to check most the LVDS outputs still picks up the variants out the Tcon and if it shuts its self down due to an issue on the panel.
              Thanks reece thats hady to know.

              Comment

              Working...
              X