Eeprom dump thread!

[lotas]

Good day to Everyone!

The exact marking on the chip is cFeon Q32B-104HIP AHF5593 1201TMA

Place it like in the picture.

[otoboy]

What is the exact marking of your chip?

Cipul dumneavoastră nu este instalat corect.

Good day to Everyone!

The exact marking on the chip is cFeon Q32B-104HIP AHF5593 1201TMA

[cccamgeek]

hello,
I have samsung tv UA65NU7300g no power, no standby light but if i remove the connector of motherboard the backlight is working and 12.8 volts is present. need help for dump file of IC1604 25q40cl.
i have backup of the original file. can please check my dump if its ok. Thank you.
Hello.. Master lotas.. need your help. thank you

Dear my be you have a schort in th e12V rile ; try to find a bad cap or back converter dc/cd is that is schort

[lotas]

We just bought an EZP2023+ and unfortunately I can't get it to dump as it can't be detected.

What is the exact marking of your chip?

Cipul dumneavoastră nu este instalat corect.

[otoboy]

Thank you! The TV is always on standby mode and there's no picture or sound. Unfortunately we haven't purchased the device yet that does that (dump or program an eeprom) nor a spare similar device to cross check. We already checked the board and suspected its the chip labeled as V502 on the board. This is our first time to handle this challenge. Thanks in advance

We just bought an EZP2023+ and unfortunately I can't get it to dump as it can't be detected.

[terminalscript]

Hello everyone , hope y'all doing great ,
i'm looking for dump eeprom for Samsung UE32J5570S , Main board : BN41-02353B , thank u very much much appreciated

[lotas]

Yes, U502

[otoboy]

What is the problem with the TV, post your original dump here, if it is not working, I will try to restore it for you.

Thank you! The TV is always on standby mode and there's no picture or sound. Unfortunately we haven't purchased the device yet that does that (dump or program an eeprom) nor a spare similar device to cross check. We already checked the board and suspected its the chip labeled as V502 on the board. This is our first time to handle this challenge. Thanks in advance

[lotas]

Hello, Good day. I am looking for Firmware or eeprom BIN for 40-MS822S0-MAD2XG TCL TV LED32D3300. Let me know if you need anything else. Thanks in advance

Panel TCL LVW320CSTT E1

What is the problem with the TV, post your original dump here, if it is not working, I will try to restore it for you.

[otoboy]

Hello, Good day. I am looking for Firmware or eeprom BIN for 40-MS822S0-MAD2XG TCL TV LED32D3300. Let me know if you need anything else. Thanks in advance

Panel TCL LVW320CSTT E1

[Ipyong tech]

thank you.. master lotas for checking my dump... now i know that my dump is good. the problem maybe somewhere in motherboard.

[lotas]

hello,
I have samsung tv UA65NU7300g no power, no standby light but if i remove the connector of motherboard the backlight is working and 12.8 volts is present. need help for dump file of IC1604 25q40cl.
i have backup of the original file. can please check my dump if its ok. Thank you.
Hello.. Master lotas.. need your help. thank you

Mainboard ?
I don't see a problem with your dump, it's working.

[Ipyong tech]

hello,
I have samsung tv UA65NU7300g no power, no standby light but if i remove the connector of motherboard the backlight is working and 12.8 volts is present. need help for dump file of IC1604 25q40cl.
i have backup of the original file. can please check my dump if its ok. Thank you.
Hello.. Master lotas.. need your help. thank you

[kamaku]

Yes was not working, "power-up, logo and reset" .
Finally loaded the firmware for one "ok odl 32631H-SB EL" from post https://www.badcaps.net/forum/troubl...64#post1683821 , worked only remote control is diferent and used one universal one.
Thanks

[lotas]

Does not work?

[lotas]

Someone can check , After logo it restart again.

model: OK ODL32661HN-DIB
Main: TP.MS3663S.PB818
Panel HK315LEDM

Try with a clean NVM.

[kamaku]

Someone can check , After logo it restart again.

model: OK ODL32661HN-DIB
Main: TP.MS3663S.PB818
Panel HK315LEDM

[cccamgeek]

hard to find new come dumped from working set
"Haier LET29C800" OR "MGS eled29"
same in two brand name :
main MSDV3218-ZC01-01
Mainboard/chassis: MSDV3218-ZC01-01
Painel display LCD: V290BJ1-PE1
Dump flash SPI 25Q32

[univers73]

Your dump is working, try yours, but with a cleared nvm.

I have a last question, I have another eeprom on this tcon witch it contains the firmware (25q80), it is possible that it can be corrupted ?

[univers73]

Your dump is working, try yours, but with a cleared nvm.

I just tried, still no boot, i will continue my research, thank anyway for you help.