Eeprom dump thread!

[dinche_ze]

Try.

it works.
than you very much

[lotas]

Pozdrav prijatelji,
imam Toshiba 32el933g TV. Samo crveno svjetlo svijetli, ne pali se ni ništa. Kada sam ažurirao firmware, otkrio sam da se TV uključuje, ali nema slike. Mislim da se matrica ne podudara. Moja matrica je LG. Za drugu ne znam. Objavit ću originalni firmware od TV-a i novi ako netko zna kako ih uskladiti.

Try.

[dinche_ze]

Pozdrav prijatelji,
imam Toshiba 32el933g TV. Samo crveno svjetlo svijetli, ne pali se ni ništa. Kada sam ažurirao firmware, otkrio sam da se TV uključuje, ali nema slike. Mislim da se matrica ne podudara. Moja matrica je LG. Za drugu ne znam. Objavit ću originalni firmware od TV-a i novi ako netko zna kako ih uskladiti.

[lotas]

Thanks Lotas it worked a treat

Ok!

[cheeky2]

Try this dump, but the panel is unknown.

Thanks Lotas it worked a treat

[dinche_ze]

So what does the firmware have to do with it? If it doesn't work for you via the remote control, check the remote control, try via a universal remote control. If it doesn't work, replace the IR receiver, make sure the pulses reach the processor...

probao sam, ispravan daljinski, nece ni univerzalni. a ir prijemnik sa 4 pina,( 2 gnd, na jednom stalnih 5V, a na drugom 5V koji opada na 3,5V kada koristim daljinski), nemam takav ir da bi testirao ,mada sumnjam da je do njeg jer reaguje

[lotas]

problem is that remote control is not working, other things works fine.

So what does the firmware have to do with it? If it doesn't work for you via the remote control, check the remote control, try via a universal remote control. If it doesn't work, replace the IR receiver, make sure the pulses reach the processor...

[dinche_ze]

Post here your original, non-working dump, I'll try to fix it.

problem is that remote control is not working, other things works fine.

[lotas]

Post here your original, non-working dump, I'll try to fix it.

[dinche_ze]

Don't you know the motherboard number either?

[lotas]

hello friend
I need spi flash for TESLA TV
model: 43S306BF
dont know matric number

Don't you know the motherboard number either?

[dinche_ze]

hello friend
I need spi flash for TESLA TV
model: 43S306BF
dont know matric number

[cheeky2]

Try this dump, but the panel is unknown.

Thanks I will give it a go over the next few days and let you know the results

[lotas]

Looking for a working dump for the following Bush TV
Model: BUSH LE-40GCL-A1
Main: TP.SIS231.PT751
Screen: V400HJ6-PE1
Attached is the faulty dump from the TV.
Thanks for any help

Try this dump, but the panel is unknown.

[cheeky2]

Looking for a working dump for the following Bush TV
Model: BUSH LE-40GCL-A1
Main: TP.SIS231.PT751
Screen: V400HJ6-PE1
Attached is the faulty dump from the TV.
Thanks for any help

[porfyriadhs]

VES315UNGB-L3-N53 screen model

[porfyriadhs]

[SMDFlea]

Hello again need firmware via usb because the tv goes to boot loop. It says not enought space and I couldn't make anything. Tv is Toshiba model 32la2063dg/2.

Please post pictures that can be read that don`t need rotating..

[porfyriadhs]

Hello again need firmware via usb because the tv goes to boot loop. It says not enought space and I couldn't make anything. Tv is Toshiba model 32la2063dg/2.

[lotas]

Hello am looking for firmware for Vestel tv 17mb171 32 inch tv . If anyone please help

4. Which firmware, firmware via USB or Dump eMMC?