Originally posted by univers73
View Post
Announcement
Collapse
No announcement yet.
Eeprom dump thread!
Collapse
This is a sticky topic.
X
X
-
Hello guys,
I need a dump for a Samsung TV stuck in boot loop.
Model : UE40EH6030WXZF
Winbond 25q40bv
Big thanks.
Leave a comment:
-
Originally posted by lotas View PostSome kind of stan dump, why is it similar to 25Q80 (t-con (1Mb)), but read as 25Q40 (512kB).
I found the 24C512C chip you mentioned but its totally dead.
Do you have the dump for this if I were to get a replacement chip?
Leave a comment:
-
Samsung Model Code: UN40MU6300FXZA
Version No: FA01
Leave a comment:
-
Hi all I am looking for a dump for a ves550undl -2d -n11 panel.The original board is 17MB211 but it is dead now I have two options to put 17MB82 or 17MB140 (I don't have 211) Both boards need software as the colors are polarized and the picture is inverted .I prefer to put 140 which is from 48 inch TV with panel ves4800unds -2d -n12. I modified the dump with vestel panel editor, but the picture is purple and there is no red color. Apparently it wants an exact dump I will be glad for your help
Leave a comment:
-
-
Originally posted by lotas View Post
Here is a working dump of eMMC (Samsung) on Sony KD-55XG8596 1-983-791-12.
https://drive.google.com/file/d/18X5...nclLW870i/view
Leave a comment:
-
where you see the first topic watch a little up the "New Topic +" button.. bye..
Leave a comment:
-
so there is nothing you can do? I thought you could act on the ignition issue... I tried another one with the same card, the TV turns on but it looks bad and upside down
Leave a comment:
-
Originally posted by MF ELETTRONICA View Post
I tried this file you sent me I think you modified it? but it doesn't work, don't you remember?
I also have firmware for recovery via usb, but VES315WNDS panel, but you have a different panel.Last edited by lotas; 11-27-2024, 11:29 AM.
Leave a comment:
-
Originariamente pubblicato da MF ELETTRONICA Visualizza postciao lotas ho scoperto che il problema è nella nand la tv lampeggia e non si accende se ti mando il dump della mia nand puoi vedere se lo risolvi? grazie
Provalo, puliscilo dagli errori di bit...
https://drive.google.com/file/d/1utt...-rVkhZ3E9/view
I tried this file you sent me I think you modified it? but it doesn't work, don't you remember?
Leave a comment:
-
Originariamente pubblicato da MF ELETTRONICA Visualizza post
ciao lotas ho scoperto che il problema è nella nand la tv lampeggia e non si accende se ti mando il dump della mia nand puoi vedere se lo risolvi? grazie
Provalo, puliscilo dagli errori di bit...
https://drive.google.com/file/d/1utt...-rVkhZ3E9/view
ho provato questo file che mi hai inviato credo lo hai modificato? ma non funziona non ricordi?
English ???
Leave a comment:
-
I tried lotas but it doesn't work.... only thing is I didn't clean the bits.... sorry how do I clean it from the bits??? but I think it doesn't work
Leave a comment:
-
Originally posted by MF ELETTRONICA View Posthi lotas i found the problem is in the nand the tv flashes and does not turn on if i send you the dump of my nand can you see if you fix it? thanks
Leave a comment:
Leave a comment: