Eeprom dump thread!

Collapse
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts

  • Manucsl
    replied
    Nobody ??

    Leave a comment:


  • Manucsl
    replied
    Hello.

    My TV is a QE65Q800TATXXC Samsung TV.

    Issue : When you plug the 220V, voltages are OK on the power board and you can hear the click from the relay, but TV is not starting when power button is pressed. Red led is blinking when you press power button. But no images or sound ( Back-light is off )
    Then if you disconnect the cable from the main board to the power supply, the TV back-light turns on.
    Any ideas to check would be very appreciated 😊

    After reading some posts on this forum, I suspect an eeprom issue so I bought a CH341A to dump it.
    You can find the dump attached to this message in zip format.

    Can you please check this eeprom ? and may be correct it ?
    Thank you very much for your help.

    Manu

    BN41-02752A MAIN AV BOARD BN41-02752A (BN94-00038G) - SAMSUNG
    BN44-01068A LED DRIVER BOARD
    BN95-06565A T-CON
    BN44-01073A Power board​
    Attached Files

    Leave a comment:


  • crazycavan
    replied
    thank you very much​

    Leave a comment:


  • yokoono
    replied
    Try
    Attached Files

    Leave a comment:


  • crazycavan
    replied
    I want to try it​

    Attached Files

    Leave a comment:


  • yokoono
    replied
    M05 ??. I have for 17MB97 panel VES480UNVS-2D-M01 .
    Last edited by yokoono; 02-22-2025, 01:27 AM.

    Leave a comment:


  • crazycavan
    replied
    HI I am looking for the motherboard firmware 17MB97 VES480UNVS -2D-M05 panel thanks in advance​

    Leave a comment:


  • PNI E.
    replied
    Hello, need dump for

    hitachi 50hk6000
    main board 17Mb130s
    ic hk 25L1606e

    thanks

    Leave a comment:


  • lotas
    replied
    Originally posted by sdfy
    Hello,

    Need dump for :​
    Technisat Techniline 40 Exlusive.

    Panel: LTA400HL04
    IC: 25Q32

    Thanks
    What model and motherboard number? Post your original dump here.

    Leave a comment:


  • sdfy
    replied
    Hello,

    Need dump for :​
    Technisat Techniline 40 Exlusive.

    Panel: LTA400HL04
    IC: 25Q32

    Thanks

    Leave a comment:


  • kamaku
    replied
    Hello,

    Need dump or usb update for :

    Wonder: WDTV15804KCSM
    Main: HK.T.RT2851P.839
    Panel: CC580PV1D
    EMMC: 8GB

    Thanks
    ​

    Leave a comment:


  • lotas
    replied
    Originally posted by metavox

    Work like a charm! THANKS
    OK!

    Leave a comment:


  • metavox
    replied
    Originally posted by lotas

    Try.
    Work like a charm! THANKS

    Leave a comment:


  • lotas
    replied
    Originally posted by metavox
    Hello to all.
    Need dumps for:
    Mitsai 24VLM13
    Main: 17MB82-2
    Panel: V236BJ1-LE1 rev.c2

    ICs: U10: 25Q16DV | U12: 25Q64FV

    Thanks
    Try.
    Attached Files

    Leave a comment:


  • metavox
    replied
    Hello to all.
    Need dumps for:
    Mitsai 24VLM13
    Main: 17MB82-2
    Panel: V236BJ1-LE1 rev.c2

    ICs: U10: 25Q16DV | U12: 25Q64FV

    Thanks

    Leave a comment:


  • xe_d_sono
    replied
    Hello,

    Need dump for :

    LG TV Model 50UP77026LB
    Main LJ21 CHASSIS/EAX69487906(1.0)
    Panel AC500DQG-SLPA3_RA
    EMMC KLM8G1GETF-B041_IC8800

    Thanks

    Leave a comment:


  • lotas
    replied
    Originally posted by max-power
    How yours is only 4.15MB and mine are twice that size once unzipped? (8Mb)
    What's wrong, there are two dumps in the archive, for each TV, 8 mb each.
    Attached Files

    Leave a comment:


  • max-power
    replied
    How yours is only 4.15MB and mine are twice that size once unzipped? (8Mb)

    Leave a comment:


  • max-power
    replied
    I think we had a missunderstanding, I had the two files, but something had gone wrong when I edit my post to correct some speeling and the two files somewhat deleted themself, so here you go:

    I dont know the difference between mine and yours throught
    Attached Files

    Leave a comment:


  • lotas
    replied
    Originally posted by max-power
    I Have two EEPROM files, both are from Haier 55'' 4K TV of the same model 55E5500U with the same main board T.MS3458.U801 but with differents Samsung panel.

    Both have been tested and worked

    Should fix the the infamous aging mode ( color rolling Red, Blue, White etc...), it did work on mine. I did use a brand new EEPROM though ( Digikey # GD25Q64CSIGR )

    Even if they use the same board, both are not intercheageable ( I try ) something weird, on one, its says: 55E5500U panel:LSC550FN08 but have a sticker underneth saying LSC550FN08 and the other one list a Samsung panel LCS550FN05 but list a BOE panel HV550QUB-N81 on the sticker underneth, so who know?
    Try these dumps with a cleaned NVM.
    Attached Files

    Leave a comment:

Related Topics

Collapse

  • AlexGsmMaster
    Eizo CS2740 eeprom dump, search.
    by AlexGsmMaster
    Good day to all, I have a big problem. I can't find the eeprom dump for the Eizo CS2740 monitor. The device doesn't turn on, the indicator just lights up. It responded to connecting to the PC once. The update process started with the standard program and then disconnected from the computer. The computer doesn't detect it anymore. If anyone has an eeprom dump, please share.
    07-26-2025, 03:24 PM
  • (0)_(0)
    Looking for a HP Photosmart C4280 EEPROM dump
    by (0)_(0)
    Hello, This might be a long shot, but I'm looking for an EEPROM dump for a HP Photosmart C4280 All-in-one printer.

    The printer seems to be in cartridge alignment mode. Sometimes it print the alignment page and then hangs during the scanning step, sometimes it hangs during the printing process and sometimes it hangs during the boot process. If I let it idle for a while then it flashes the back-light of the top screen and there's a letter E. Bottom screen is asking me to restart it to no avail. I have to remove the power cable from the printer for a couple of minutes to make it work...
    02-17-2022, 09:09 PM
  • my2k2
    Harman Kardon AVR 171, Request for IC1504 (24C32) eeprom dump file
    by my2k2
    Good day to every one,

    I have AVR 171 the IC1504 (24C32) eeprom is corrupted not able to read.
    Does anybody have an eeprom dump file? I really appreciate any help.
    Thanks in advance.
    07-01-2024, 09:04 PM
  • Whale linguini
    p14s Gen 2 thunderbolt eeprom dump
    by Whale linguini
    P14s Gen 2
    HT4B0/HP4B0/HT5B1/HT4B2
    NM-D352 Rev 1.0
    sn PF-35P15W

    Requesting thunderbolt dump

    also attached is the tbt dump. I extracted the bin from the cap file and modified it, not sure if it's correct. also didnt work....
    09-03-2024, 01:56 PM
  • Ancient1
    Before I dump this Panel...
    by Ancient1
    Hi

    I was working all day on a 42" with no backlight = Driver is bad . LED Tester. Image exists

    As I was reassembling, I discovered faults on the screen ( used the LED Tester to power the strips).

    Right distribution board, 2 Flexs, near them:
    The one near the center has 1" line on screen. Pressing on the board-side or Panel side of the Flex bonding place results in some change, I sensed heating one time, but main fault line remains
    The other, pressing on the Panel to the Chassey and the lines disappears 99.99%

    I...
    10-23-2022, 11:07 AM
  • Loading...
  • No more items.
Working...