E2070SwNE aoc need dump file
-
-
E2070SwNE badly need dump eeprom
my monitor display aoc logo after that display it turns black ..tried testing it with my laptop the same issue so i need to try flashing eeprom with ch341aComment
-
hello
samsung UE40H5505AK
BN94-07369K
Comment
-
turn on says smart tv then turn off, and then keep restartingComment
-
original dumpComment
-
Hi , i have a samsung model ua32k5100 that has its memory image corrupted. IC 805 W25Q40. Board name BN94-10869Q. can someone pls try to fix my original dump or give me one. original dump attached .Thanks a lot.Comment
-
Hi everyone !
I am looking for firmware update for Toshiba 32LF221U19
stuck on fire tv display
main board is TD.T950.61 sticker ST3151A05-8
ThanksComment
-
Hi, I need help with a Telesystem Palco32 FL09 TV.
It stays in standby mode.
I'm attaching a dump to see if it can be repaired
mainboard:tp.ms3663s.pb818 panel:cx315dledm
grazie
Comment
-
Not working with my dump?Comment
-
sorry for the delay in replying the file worked thank you very muchComment
-
Good day to all, I have a big problem. I can't find the eeprom dump for the Eizo CS2740 monitor. The device doesn't turn on, the indicator just lights up. It responded to connecting to the PC once. The update process started with the standard program and then disconnected from the computer. The computer doesn't detect it anymore. If anyone has an eeprom dump, please share.07-26-2025, 03:24 PM -
Hi, all
I need the dump/firmware for this tv, it was on a boot loop, i dont have the original corrupted dump because i used a pen drive with a firmware that solved the boot loop, initially it seemed it was ok but the tv has no sound
Thanks10-17-2025, 03:51 AM -
Good day to every one,
I have AVR 171 the IC1504 (24C32) eeprom is corrupted not able to read.
Does anybody have an eeprom dump file? I really appreciate any help.
Thanks in advance.07-01-2024, 09:04 PM -
Hello, This might be a long shot, but I'm looking for an EEPROM dump for a HP Photosmart C4280 All-in-one printer.
The printer seems to be in cartridge alignment mode. Sometimes it print the alignment page and then hangs during the scanning step, sometimes it hangs during the printing process and sometimes it hangs during the boot process. If I let it idle for a while then it flashes the back-light of the top screen and there's a letter E. Bottom screen is asking me to restart it to no avail. I have to remove the power cable from the printer for a couple of minutes to make it work...02-17-2022, 09:09 PM -
P14s Gen 2
HT4B0/HP4B0/HT5B1/HT4B2
NM-D352 Rev 1.0
sn PF-35P15W
Requesting thunderbolt dump
also attached is the tbt dump. I extracted the bin from the cap file and modified it, not sure if it's correct. also didnt work....
Comment