Eeprom dump thread!

Collapse
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts
  • cheeky2
    Badcaps Veteran
    • Dec 2012
    • 337
    • uk

    #1901
    Originally posted by lotas

    Try this dump, but the panel is unknown.
    Thanks I will give it a go over the next few days and let you know the results

    Comment

    • dinche_ze
      Member
      • Feb 2020
      • 16
      • Bosnia Hercegovina

      #1902
      hello friend
      I need spi flash for TESLA TV
      model: 43S306BF
      dont know matric number

      Comment

      • lotas
        Badcaps Legend
        • Jan 2016
        • 4620
        • Russia

        #1903
        Originally posted by dinche_ze
        hello friend
        I need spi flash for TESLA TV
        model: 43S306BF
        dont know matric number
        Don't you know the motherboard number either?

        Comment

        • dinche_ze
          Member
          • Feb 2020
          • 16
          • Bosnia Hercegovina

          #1904
          Originally posted by lotas

          Don't you know the motherboard number either?

          Comment

          • lotas
            Badcaps Legend
            • Jan 2016
            • 4620
            • Russia

            #1905
            Originally posted by dinche_ze

            Post here your original, non-working dump, I'll try to fix it.​

            Comment

            • dinche_ze
              Member
              • Feb 2020
              • 16
              • Bosnia Hercegovina

              #1906
              Originally posted by lotas


              Post here your original, non-working dump, I'll try to fix it.​
              problem is that remote control is not working, other things works fine.

              Comment

              • lotas
                Badcaps Legend
                • Jan 2016
                • 4620
                • Russia

                #1907
                Originally posted by dinche_ze

                problem is that remote control is not working, other things works fine.
                So what does the firmware have to do with it? If it doesn't work for you via the remote control, check the remote control, try via a universal remote control. If it doesn't work, replace the IR receiver, make sure the pulses reach the processor...

                Comment

                • dinche_ze
                  Member
                  • Feb 2020
                  • 16
                  • Bosnia Hercegovina

                  #1908
                  Originally posted by lotas

                  So what does the firmware have to do with it? If it doesn't work for you via the remote control, check the remote control, try via a universal remote control. If it doesn't work, replace the IR receiver, make sure the pulses reach the processor...
                  probao sam, ispravan daljinski, nece ni univerzalni. a ir prijemnik sa 4 pina,( 2 gnd, na jednom stalnih 5V, a na drugom 5V koji opada na 3,5V kada koristim daljinski), nemam takav ir da bi testirao ,mada sumnjam da je do njeg jer reaguje

                  Comment

                  • cheeky2
                    Badcaps Veteran
                    • Dec 2012
                    • 337
                    • uk

                    #1909
                    Originally posted by lotas

                    Try this dump, but the panel is unknown.
                    Thanks Lotas it worked a treat

                    Comment

                    • lotas
                      Badcaps Legend
                      • Jan 2016
                      • 4620
                      • Russia

                      #1910
                      Originally posted by cheeky2

                      Thanks Lotas it worked a treat
                      Ok!

                      Comment

                      • dinche_ze
                        Member
                        • Feb 2020
                        • 16
                        • Bosnia Hercegovina

                        #1911
                        Pozdrav prijatelji,
                        imam Toshiba 32el933g TV. Samo crveno svjetlo svijetli, ne pali se ni ništa. Kada sam ažurirao firmware, otkrio sam da se TV uključuje, ali nema slike. Mislim da se matrica ne podudara. Moja matrica je LG. Za drugu ne znam. Objavit ću originalni firmware od TV-a i novi ako netko zna kako ih uskladiti.
                        Attached Files
                        Last edited by dinche_ze; 05-26-2025, 02:43 PM. Reason: not original photo

                        Comment

                        • lotas
                          Badcaps Legend
                          • Jan 2016
                          • 4620
                          • Russia

                          #1912
                          Originally posted by dinche_ze
                          Pozdrav prijatelji,
                          imam Toshiba 32el933g TV. Samo crveno svjetlo svijetli, ne pali se ni ništa. Kada sam ažurirao firmware, otkrio sam da se TV uključuje, ali nema slike. Mislim da se matrica ne podudara. Moja matrica je LG. Za drugu ne znam. Objavit ću originalni firmware od TV-a i novi ako netko zna kako ih uskladiti.
                          Try.
                          Attached Files

                          Comment

                          • dinche_ze
                            Member
                            • Feb 2020
                            • 16
                            • Bosnia Hercegovina

                            #1913
                            Originally posted by lotas

                            Try.
                            it works.
                            than you very much

                            Comment

                            • lotas
                              Badcaps Legend
                              • Jan 2016
                              • 4620
                              • Russia

                              #1914
                              Originally posted by dinche_ze

                              it works.
                              than you very much
                              That's good.

                              Comment

                              • Salvatore Cancellieri
                                New Member
                                • May 2025
                                • 8
                                • Italia

                                #1915
                                Hi everyone, I have a 65" Philips TV, it turns on and after a while it restarts endlessly, I checked the power supply and everything is ok, I disconnected all the devices and the panel but it continues to restart, I assume it is a dump problem, below is the original dump
                                TV model 65PUS6523/12
                                Board model 703TQHPL433 715G8709-M0B-B01-005K​

                                Thanks
                                Attached Files

                                Comment

                                • luzmina
                                  Member
                                  • May 2015
                                  • 17
                                  • US

                                  #1916
                                  Here is the dump for the Hisense 70H6570G and 70A6G. It fixed the corrupted EMMC issue that put the TV into a loop.
                                  Board RSAG7.820.9783/ROH
                                  https://drive.google.com/file/d/129h...usp=drive_link

                                  Comment

                                  • digitel
                                    New Member
                                    • Apr 2013
                                    • 9
                                    • Alicante

                                    #1917
                                    Please, do you have the firmware for a Hitachi 43HAE4251 TV, with Mainboard 17MB171 and Panel VES430UNDH-N2-N45? The memory is not SPI Flash. It's EMMc. Thank you.

                                    Comment

                                    • sordids999
                                      Badcaps Legend
                                      • May 2013
                                      • 2153
                                      • uk

                                      #1918
                                      Hi does anyone have the firmware for a Panasonic 50lx650 main board 17mb185
                                      Screen ves500qnzh-n2-z01
                                      23798312
                                      Thanks

                                      Comment

                                      • digitel
                                        New Member
                                        • Apr 2013
                                        • 9
                                        • Alicante

                                        #1919
                                        Hitachi 43HAE4251 firmware

                                        Please, do you have the firmware for a Hitachi 43HAE4251 TV, with Mainboard 17MB171 and Panel VES430UNDH-N2-N45 The memory is not SPI Flash. It's EMMc. Thank you.

                                        Comment

                                        Related Topics

                                        Collapse

                                        • AlexGsmMaster
                                          Eizo CS2740 eeprom dump, search.
                                          by AlexGsmMaster
                                          Good day to all, I have a big problem. I can't find the eeprom dump for the Eizo CS2740 monitor. The device doesn't turn on, the indicator just lights up. It responded to connecting to the PC once. The update process started with the standard program and then disconnected from the computer. The computer doesn't detect it anymore. If anyone has an eeprom dump, please share.
                                          07-26-2025, 03:24 PM
                                        • (0)_(0)
                                          Looking for a HP Photosmart C4280 EEPROM dump
                                          by (0)_(0)
                                          Hello, This might be a long shot, but I'm looking for an EEPROM dump for a HP Photosmart C4280 All-in-one printer.

                                          The printer seems to be in cartridge alignment mode. Sometimes it print the alignment page and then hangs during the scanning step, sometimes it hangs during the printing process and sometimes it hangs during the boot process. If I let it idle for a while then it flashes the back-light of the top screen and there's a letter E. Bottom screen is asking me to restart it to no avail. I have to remove the power cable from the printer for a couple of minutes to make it work...
                                          02-17-2022, 09:09 PM
                                        • my2k2
                                          Harman Kardon AVR 171, Request for IC1504 (24C32) eeprom dump file
                                          by my2k2
                                          Good day to every one,

                                          I have AVR 171 the IC1504 (24C32) eeprom is corrupted not able to read.
                                          Does anybody have an eeprom dump file? I really appreciate any help.
                                          Thanks in advance.
                                          07-01-2024, 09:04 PM
                                        • Whale linguini
                                          p14s Gen 2 thunderbolt eeprom dump
                                          by Whale linguini
                                          P14s Gen 2
                                          HT4B0/HP4B0/HT5B1/HT4B2
                                          NM-D352 Rev 1.0
                                          sn PF-35P15W

                                          Requesting thunderbolt dump

                                          also attached is the tbt dump. I extracted the bin from the cap file and modified it, not sure if it's correct. also didnt work....
                                          09-03-2024, 01:56 PM
                                        • Ancient1
                                          Before I dump this Panel...
                                          by Ancient1
                                          Hi

                                          I was working all day on a 42" with no backlight = Driver is bad . LED Tester. Image exists

                                          As I was reassembling, I discovered faults on the screen ( used the LED Tester to power the strips).

                                          Right distribution board, 2 Flexs, near them:
                                          The one near the center has 1" line on screen. Pressing on the board-side or Panel side of the Flex bonding place results in some change, I sensed heating one time, but main fault line remains
                                          The other, pressing on the Panel to the Chassey and the lines disappears 99.99%

                                          I...
                                          10-23-2022, 11:07 AM
                                        • Loading...
                                        • No more items.
                                        Working...