Eeprom dump thread!

[MF ELETTRONICA]

Originariamente pubblicato da MF ELETTRONICA Visualizza post
ciao lotas ho scoperto che il problema è nella nand la tv lampeggia e non si accende se ti mando il dump della mia nand puoi vedere se lo risolvi? grazie

Provalo, puliscilo dagli errori di bit...

https://drive.google.com/file/d/1utt...-rVkhZ3E9/view

ho provato questo file che mi hai inviato credo lo hai modificato? ma non funziona non ricordi?

English ???

[lotas]

lotas can you give me a hand? please

How can I help, what do I need?

[MF ELETTRONICA]

lotas can you give me a hand? please

[MF ELETTRONICA]

I tried lotas but it doesn't work.... only thing is I didn't clean the bits.... sorry how do I clean it from the bits??? but I think it doesn't work

[lotas]

hi lotas i found the problem is in the nand the tv flashes and does not turn on if i send you the dump of my nand can you see if you fix it? thanks

Try it, clear it from bit errors...https://drive.google.com/file/d/1utt...-rVkhZ3E9/view

[lotas]

if you open a new page and paste the copied link it works

Ok, it worked.

[MF ELETTRONICA]

if you open a new page and paste the copied link it works

[MF ELETTRONICA]

yes do it like this copy link and open page and paste link you will see that it works otherwise send me your email

[lotas]

http://www.mfelettronicasestri.it/DEADfile/MT29F4G08ABAEAWP@TSOP48.rar
I attach the link to the nand file if you can take a look thanks

I don't have access to this resource, please upload it to another file hosting service.

[MF ELETTRONICA]

i left link above nand can you check it out Lotas? thanks

[MF ELETTRONICA]

http://www.mfelettronicasestri.it/DEADfile/MT29F4G08ABAEAWP@TSOP48.rar
I attach the link to the nand file if you can take a look thanks

[MF ELETTRONICA]

hi lotas i found the problem is in the nand the tv flashes and does not turn on if i send you the dump of my nand can you see if you fix it? thanks

[lotas]

I have the t56 programmer and I use xgprog

It's clear, as dump was considered, click on status reg. and you will see in the window where there will be checkmarks, that's what your spi flash is currently set to.

[MF ELETTRONICA]

I have the t56 programmer and I use xgprog

[MF ELETTRONICA]

ho il programmatore t56 e uso xgprog

[lotas]

sorry lotas how do you read a status reg of the eprom?

The eeprom does not have a status register, but the spi flash does. When reading a dump from the spi flash, the programmer should show which status register is installed. What kind of programmer do you have, if CH341A, then what program do you use for it?

[MF ELETTRONICA]

sorry lotas how do you read a status reg of the eprom?

[MF ELETTRONICA]

I tried it but it doesn't work, the TV keeps flashing but it doesn't turn on, the red light flashes

[MF ELETTRONICA]

sorry lotas this is already ready do i have to change the status reg? in case can you tell me what the status reg is thanks

[lotas]

ok lotas yes I sent you as you asked me tv model screen model and main number I'll send you everything again here
tv model
screen model
and motherboard model

I only have this dump.